AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

488-5580 WIRING GP-CAMERA -AUXILIARY S/N NA91-UP AN ATTACHMENT PM312 COLD PLANER


ELECTRICAL AND STARTING SYSTEM
WIRING GP

COLD PLANER PM312 COLD PLANER NA9
 PM312 Cold Planer NA900001-UP (MACHINE) POWERED BY C9 Engine M0089929 PM312 NA9   (2018)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CAMERA
381-7314 WIRING GP-CAMERA
WIRING GP-CAMERA
421-8146 WIRING GP-CAMERA
WIRING GP-CAMERA
488-5580 WIRING GP-CAMERA
WIRING GP-CAMERA
542-7915 WIRING GP-CAMERA
WIRING GP-CONVEYOR
381-6689 WIRING GP-CONVEYOR
WIRING GP-ELECTRONIC CONTROL
434-3255 WIRING GP-ELECTRONIC CONTROL
 

#M00899290190
 

488-5580: WIRING GP-CAMERA

488-5580 WIRING GP-CAMERA -AUXILIARY
S/N NA91-UP
AN ATTACHMENT
i07287450 M0089929
4885580 WIRING GP-CAMERA Parts scheme
  For full view, you need register

Parts for your PM312 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 283-0657 [1] CABLE AS (VIDEO, 3-M)  
2. 336-6684 Y [1] CAMERA GP  
3. 398-1930 [1] HARNESS AS-MONITOR (CAMERA)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 418-0232 [1] BRACKET  
  Y   SEPARATE ILLUSTRATION
 

#M00899290191
 

542-7915: WIRING GP-CAMERA

542-7915 WIRING GP-CAMERA -LH, SIDE PLATE
S/N NA91-UP
AN ATTACHMENT
i07287393 M0089929
5427915 WIRING GP-CAMERA Parts scheme
  For full view, you need register

Parts for your PM312 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
2. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
3. 7K-1181 [25] STRAP-CABLE  
4. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
5. 251-8248 [1] CABLE AS-COMMUNICATION  
6. 336-6684 Y [1] CAMERA GP  
7. 466-2421 Y [1] LAMP GP-FLOOD (32-VOLT)(LED)  
8. 543-0458 [1] BRACKET AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
9. 543-0459 [1] BRACKET  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00899290192
 

381-6689: WIRING GP-CONVEYOR

381-6689 WIRING GP-CONVEYOR
S/N NA91-UP
PART OF 381-6529, 381-6533 CONVEYOR AR-SECOND STAGE
AN ATTACHMENT
i07281742 M0089929
3816689 WIRING GP-CONVEYOR Parts scheme
  For full view, you need register

Parts for your PM312 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
2. 3S-2093 [22] STRAP-CABLE  
3. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
5. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
6. 163-1201 [1] HORN AS (24-VOLT, LOW TONE)  
7. 177-2215 [14] STRAP-DUAL CLAMP  
8. 256-8730 [1] PLATE AS  
9. 562-6342 Y [1] HARNESS AS-WIRING (CONVEYOR)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00899290193
 

434-3255: WIRING GP-ELECTRONIC CONTROL

434-3255 WIRING GP-ELECTRONIC CONTROL
S/N WYE1-UP
PART OF 468-5537 ENGINE AR-COMPLETE
CANNOT BE USED WITH ENGINE WITH INTAKE MANIFOLD TEMPERATURE SENSOR LOCATED ON ELBOW GP-AIR
AN ATTACHMENT
i07275849 M0089929
4343255 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your PM312 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [13] STRAP-CABLE  
2. 6K-0806 [1] STRAP-CABLE  
3. 7K-1181 [11] STRAP-CABLE  
4. 054-4984 [1] SPACER (10X15X8.5-MM THK)  
5. 131-0353 M [1] STUD (M8X1.25X82.75-MM)  
6. 178-1781 [1] CLIP  
7. 178-3336 M [8] NUT-HEX FLANGE (M8X1.25-THD)  
8. 224-9222 [1] BRACKET  
9. 244-3168 [1] BRACKET AS  
  232-1693 M [1] BOLT-FLANGE HEAD (M6X1X35-MM)  
10. 271-5584 [1] CLIP  
11. 307-1674 [4] SPACER (9X16X36-MM THK)  
12. 434-3254 Y [1] HARNESS AS-SENSOR  
13. 140-0174 M [1] BOLT (M10X1.5X75-MM)  
14. 204-8000 [2] MOUNTING-CABLE TIE  
15. 2V-2209 [1] SPACER (13.9X21.3X55.6-MM THK)  
16. 309-4314 [1] CLIP (LADDER)  
17. 352-3964 [2] CLIP (LADDER)  
19. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
20. 6V-6317 M [1] BOLT (M10X1.5X20-MM)  
21. 9N-4685 [1] BLOCK  
22. 347-7104 [1] BRACKET AS  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00899290194
 

349-1502: WIRING GP-ENGINE

349-1502 WIRING GP-ENGINE
S/N WYE1-UP
PART OF 468-5537 ENGINE AR-COMPLETE
AN ATTACHMENT
i07275440 M0089929
3491502 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your PM312 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 528-1344 Y [1] HARNESS AS-ENGINE (FUEL PRESSURE)  
2. 6V-8490 M [2] BOLT (M6X1X25-MM)  
3. 7G-1239 [1] SPACER (10.5X19X4.5-MM THK)  
4. 9X-2097 M [1] STUD (M8X1.25-THD)  
5. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
6. 354-4940 [1] RECEPTACLE AS-CONNECTOR  
  8T-8737 [12] PLUG-SEAL  
  230-4010 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
7. 3S-2093 [3] STRAP-CABLE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00899290195
 

381-6568: WIRING GP-FRONT

381-6568 WIRING GP-FRONT
S/N NA91-UP
PART OF 471-6428 ELECTRICAL AR
i07279344 M0089929
3816568 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your PM312 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
2. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
3. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
4. 7X-2533 M [1] BOLT (M6X1X35-MM)  
5. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
6. 3S-2093 [17] STRAP-CABLE  
7. 5P-8439 [1] GROMMET  
8. 7K-1181 [86] STRAP-CABLE  
9. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
11. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
12. 132-5789 [4] CLIP (LADDER)  
13. 156-6175 [1] CLIP (LADDER)  
14. 163-1201 [1] HORN AS (24-VOLT, LOW TONE)  
15. 195-8372 [2] CLIP  
16. 314-9772 [1] SENSOR GP-PRESSURE (DIFFERENTIAL)  
17. 351-0275 [1] CONNECTOR AS  
  6V-3250 [1] SEAL-O-RING  
  268-4045 [1] CONNECTOR  
18. 353-4515 [1] SWITCH GP-TOGGLE (WATER TANK FILL)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 20-GA)  
19. 367-9470 [1] SWITCH AS-PUSH BUTTON (EMERGENCY STOP)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
20. 368-4778 [1] FILM-WARNING (EMERGENCY STOP)  
21. 381-2621 [1] MOUNTING-CABLE TIE  
22. 425-7391 [1] SENSOR GP-POSITION (PROXIMITY)  
  471-9252 M [2] NUT-HEX JAM (M30X1.5-THD)  
23. 491-6003 [1] HARNESS AS-SENSOR (SPEED)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  194-5226 [8] WIRE AS (16-GA)  
    -OR-
  194-5227 [8] WIRE AS (14-GA)  
24. 492-5629 [1] SWITCH AS-PUSH BUTTON (PRESSURE WASHER)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
25. 518-4216 [1] HARNESS AS-SENSOR (CYLINDER)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
26. 541-2749 Y [1] HARNESS AS-FRONT  
27. 177-2215 [13] STRAP-DUAL CLAMP  
28. 178-3620 [7] STRAP-DUAL CLAMP  
29. 200-6345 [1] SADDLE-MOUNTING (DUAL SWIVEL)  
30. 5P-1465 E HOSE (81.2-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00899290196
 

471-6429: WIRING GP-MACHINE

471-6429 WIRING GP-MACHINE
S/N NA91-UP
PART OF 471-6428 ELECTRICAL AR
i07291158 M0089929
4716429 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your PM312 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
2. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
3. 130-5300 [2] CLIP  
4. 204-2281 [3] STRAP-CABLE  
5. 228-7100 [2] SEAL-O-RING  
6. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
7. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
8. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
9. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
10. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP)  
11. 3K-0360 [1] SEAL-O-RING  
12. 3S-2093 [12] STRAP-CABLE  
13. 4P-7581 [6] CLIP (LADDER)  
14. 4P-7582 [1] CLIP (LADDER)  
15. 4P-8134 [1] CLIP (LADDER)  
16. 5C-7261 M [4] NUT (M8X1.25-THD)  
17. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
18. 5P-8939 [2] GROMMET  
19. 7J-0204 [1] SEAL-O-RING  
20. 7K-1181 [49] STRAP-CABLE  
21. 7P-1695 [1] WASHER (10.5X19X3-MM THK)  
22. 8R-9137 [1] ANGLE  
23. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
24. 8T-4138 M [1] BOLT (M6X1X20-MM)  
25. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
27. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
28. 125-8534 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
29. 132-5789 [6] CLIP (LADDER)  
30. 145-7028 Y [1] SENSOR GP-TEMPERATURE (OIL TEMPERATURE)  
31. 156-6175 [4] CLIP (LADDER)  
32. 216-4596 [1] ELBOW  
33. 238-0120 [1] SENSOR GP-SPEED (ROTOR SPEED)  
34. 256-6453 [1] SENSOR-TEMPERATURE (2-PIN)(AMBIENT AIR)  
35. 293-9452 [2] MOUNTING-CABLE TIE  
36. 320-3063 [1] SENSOR GP-PRESSURE (AIR FILTER)  
37. 381-2621 [1] MOUNTING-CABLE TIE  
38. 382-2001 [1] SENSOR GP-LIQUID LEVEL (WATER IN FUEL)  
39. 390-8511 [1] LAMP GP (24-VOLT)(UTILITY)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
40. 396-4849 [1] BRACKET  
41. 516-4864 Y [1] HARNESS AS-ENGINE  
42. 541-2752 Y [1] HARNESS AS-WIRING (CENTER)  
43. 177-2215 [23] STRAP-DUAL CLAMP  
44. 8T-0639 M [2] BOLT (M6X1X12-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00899290197
 

381-6580: WIRING GP-REAR

381-6580 WIRING GP-REAR
S/N NA91-UP
PART OF 471-6428 ELECTRICAL AR
i07279352 M0089929
3816580 WIRING GP-REAR Parts scheme 3816580 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your PM312 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
2. 421-8512 [1] PLUG  
3. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
4. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
5. 8T-6912 M [2] BOLT (M8X1.25X50-MM)  
6. 3S-2093 [44] STRAP-CABLE  
7. 5C-2890 M [6] NUT (M6X1-THD)  
8. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
9. 6V-9671 M [8] SCREW-MACHINE (M3X0.5X12-MM)  
10. 7K-1181 [30] STRAP-CABLE  
11. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
13. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
14. 116-0118 [1] CLIP  
15. 162-9112 [1] GROMMET-SPLIT  
16. 232-1473 [3] WASHER (6X18X1-MM THK)  
17. 267-2145 [1] ALARM AS (BACKUP)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-1813 E SLEEVE (29-CM)  
18. 334-5410 [2] LAMP GP-SIGNAL  
    (EACH INCLUDES)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
19. 344-5674 M [2] NUT (M8X1.25-THD)  
20. 425-7391 [2] SENSOR GP-POSITION (PROXIMITY)(SWING)  
    (EACH INCLUDES)
  471-9252 M [2] NUT-HEX JAM (M30X1.5-THD)  
21. 491-6003 [1] HARNESS AS-SENSOR (SPEED)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  194-5226 [8] WIRE AS (16-GA)  
    -OR-
  194-5227 [8] WIRE AS (14-GA)  
22. 518-4216 [5] HARNESS AS-SENSOR  
    (EACH INCLUDES)
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
23. 541-2753 Y [1] HARNESS AS-REAR  
24. 542-5019 Y [1] CONSOLE GP-OPERATOR  
25. 544-6051 Y [1] HARNESS AS-REAR  
26. 548-5721 [2] BRACKET  
27. 177-2215 [2] STRAP-DUAL CLAMP  
28. 178-3620 [3] STRAP-DUAL CLAMP  
29. 9X-2046 M [4] SCREW-TRUSS HEAD (M6X1X35-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00899290198
 

343-9066: WIRING GP-UNIT INJECTOR

343-9066 WIRING GP-UNIT INJECTOR
S/N WYE1-UP
PART OF 434-5135 ENGINE AR-CORE
FOR USE WITH UNIT INJECTORS WITHOUT BRAKE
CANNOT BE USED WITH UNIT INJECTORS WITH BRAKE
AN ATTACHMENT
i06208975 M0089929
3439066 WIRING GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your PM312 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 441-4481 Y [1] WIRING GP-UNIT INJECTOR  
2. 175-7141 M [6] NUT-HEX FLANGE (M10X1.5-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00899290199
 

441-4481: WIRING GP-UNIT INJECTOR

441-4481 WIRING GP-UNIT INJECTOR
S/N WYE1-UP
WITHOUT BRAKES
PART OF 343-9066 WIRING GP-UNIT INJECTOR
AN ATTACHMENT
i06210161 M0089929
4414481 WIRING GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your PM312 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] HARNESS AS-WIRING  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Monitoring System
PM310, PM312, and PM313 Cold Planer
Battery Disconnect Switch
PM310, PM312, and PM313 Cold Planer
Fuses - Replace
PM310, PM312, and PM313 Cold Planer
Battery or Battery Cable - Inspect/Replace
PM310, PM312, and PM313 Cold Planer
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation of the White Noise Back Up Alarms {7406}
Installation of the White Noise Back Up Alarms {7406}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Systems Operation
Location of Electrical Components
PM310, PM312 and PM313 Cold Planer Propel Systems
Electrical Schematic (Rotor Drive System)
PM310, PM312 and PM313 Cold Planer Machine Systems
Electrical Schematic (Conveyor System)
PM310, PM312 and PM313 Cold Planer Machine Systems
Electrical Schematic (Auxiliary Hydraulic System)
PM310, PM312 and PM313 Cold Planer Machine Systems
Electrical Schematic (Hydraulic Fan)
PM310, PM312 and PM313 Cold Planer Machine Systems
Testing and Adjusting
Electric Starting System - Test
C9.3 Engines for Caterpillar Built Machines
Troubleshooting
Electrical Connectors - Inspect
C9.3 Engines for Caterpillar Built Machines
Electrical Connectors
C9.3 Engines for Caterpillar Built Machines
Connector Locations
PM310, PM312, and PM313 Cold Planers Electronic System
CAN Data Link - Test
PM310, PM312, and PM313 Cold Planers Electronic System
Electrical Connector - Inspect
PM310, PM312, and PM313 Cold Planers Electronic System
Wiring Harness (Open Circuit) - Test
PM310, PM312, and PM313 Cold Planers Electronic System
Wiring Harness (Short Circuit) - Test
PM310, PM312, and PM313 Cold Planers Electronic System
Connector Contact Description
PM310, PM312, and PM313 Cold Planers Electronic System
System Schematic
PM310, PM312, and PM313 Cold Planers Electronic System
CAN Data Link - Test
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope
Service Magazine
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog PM312 :

WIRING GP-CAMERA
421-8146 WIRING GP-CAMERA
WIRING GP-CAMERA
381-7314 WIRING GP-CAMERA
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
SWITCH GP-DISCONNECT
452-6892 SWITCH GP-DISCONNECT
STARTING MOTOR GP-ELECTRIC
416-0346 STARTING MOTOR GP-ELECTRIC
SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
234-5012 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
145-7028 SENSOR GP-TEMPERATURE
WIRING GP-CAMERA
542-7915 WIRING GP-CAMERA
WIRING GP-CONVEYOR
381-6689 WIRING GP-CONVEYOR
WIRING GP-ELECTRONIC CONTROL
434-3255 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ENGINE
349-1502 WIRING GP-ENGINE
WIRING GP-FRONT
381-6568 WIRING GP-FRONT
WIRING GP-MACHINE
471-6429 WIRING GP-MACHINE
WIRING GP-REAR
381-6580 WIRING GP-REAR
WIRING GP-UNIT INJECTOR
343-9066 WIRING GP-UNIT INJECTOR
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.