348-9905 CYLINDER BLOCK AS S/N HPC1-UP PART OF 349-2528 CYLINDER BLOCK GP 24 MOTOR GRADER

BASIC ENGINE

CYLINDER BLOCK GP

0. 348-9905 CYLINDER B
1. 349-2528 CYLINDER B

CYLINDER HEAD GP

2. 396-8374 CYLINDER H
3. 425-7738 CYLINDER H
4. 369-4607 CYLINDER H
5. 396-8375 CYLINDER H

DAMPER GP

6. 361-0069 DAMPER & P
7. 352-7936 DAMPER GP

DRIVE GP-ACCESSORY

8. 421-9597 DRIVE GP-A

HOUSING GP-FLYWHEEL

9. 471-4253 FASTENER G
0. INFORMATION

MOTOR GRADER 24 MOTOR GRADER N9Z
24 Motor Grader N9Z00001-UP (MACHINE) POWERED BY C27 Engine M0090311 24 N9Z (2018)

BASIC ENGINE

CYLINDER BLOCK GP

347-4107 COVER GP-CYLINDER BLOCK

380-9127 COVER GP-REAR HOUSING

348-9904 CYLINDER BLOCK AS

348-9905 CYLINDER BLOCK AS

349-2528 CYLINDER BLOCK GP

351-2234 PLUG GP-CYLINDER BLOCK

#M00903110030

348-9905: CYLINDER BLOCK AS

CYLINDER BLOCK AS

348-9905 CYLINDER BLOCK AS
S/N HPC1-UP
PART OF 349-2528 CYLINDER BLOCK GP

i03745213 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9L-5854	[12]	BAND-FILLER (130.2-MM ID)
2.	110-2220	[12]	SEAL-LINER
3.	142-6217	[12]	SEAL-O-RING
4.	142-7072	[12]	SEAL-LINER
5.	197-9322	[12]	LINER-CYLINDER BLOCK
6.	348-9904 Y	[1]	CYLINDER BLOCK AS

	6I-4361 ABFN		INSERT-LINER SEAT (0.772-MM THK)
	9Y-3368 ABFN		INSERT-LINER SEAT (0.822-MM THK)
	6I-4362 ABFN		INSERT-LINER SEAT (0.872-MM THK)
	6I-4364 ABFN		INSERT-LINER SEAT (1.655-MM THK)
	6I-4363 ABFN		INSERT-LINER SEAT (1.555-MM THK)
	2W-3815 ABFN		INSERT-LINER SEAT (1.605-MM THK)
	101-0523 ABFN		INSERT-LINER SEAT (5.21-MM THK)
	6I-4365 ABFN		INSERT-LINER SEAT (2.66-MM THK)
	5N-0093 ABFN		INSERT-LINER SEAT (2.71-MM THK)
	6I-4366 ABFN		INSERT-LINER SEAT (2.76-MM THK)
	101-0524 ABFN		INSERT-LINER SEAT (5.16-MM THK)
	101-0525 ABFN		INSERT-LINER SEAT (5.26-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	N		FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK REFER TO SEBF8076 IN SISWEB
	Y		SEPARATE ILLUSTRATION

#M00903110031

349-2528: CYLINDER BLOCK GP

CYLINDER BLOCK GP

349-2528 CYLINDER BLOCK GP
S/N HPC1-UP
PART OF 388-3923 ENGINE AR-CORE

i03838671 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	354-8484	[2]	GASKET-PLATE
2.	240-9543	[14]	WASHER (12.45X22.35X1.82-MM THK)
3.	5P-8356	[4]	SEAL-O-RING
4.	4N-1650	[4]	DOWEL
5.	315-9859	[2]	PLUG AS
			(EACH INCLUDES)
	9S-8008	[1]	PLUG (1-1/16-12-THD)
	238-5082	[1]	SEAL-O-RING
6.	225-3100	[2]	PLATE-SPACER
7.	7C-9614	[4]	PLUG-TAPERLOCK (1-5/8-12-THD)
8.	4N-0683	[4]	DOWEL
9.	214-1728	[1]	STUD (3/8-16, 1/8-27X3.5-IN)
10.	6L-4428	[3]	STUD-TAPERLOCK (3/8-16X4.01-IN)
11.	8T-6757	[1]	PLUG-PIPE
12.	Y	[1]	CYLINDER BLOCK AS
13.	307-2671	[1]	PLUG AS
	9S-8002	[1]	PLUG (7/16-20-THD)
	214-7566	[1]	SEAL-O-RING
14.	3B-0645	[1]	PLUG-CUP

	6I-4361 ABFN		INSERT-LINER SEAT (0.772-MM THK)
	9Y-3368 ABFN		INSERT-LINER SEAT (0.822-MM THK)
	6I-4362 ABFN		INSERT-LINER SEAT (0.872-MM THK)
	6I-4363 ABFN		INSERT-LINER SEAT (1.555-MM THK)
	2W-3815 ABFN		INSERT-LINER SEAT (1.605-MM THK)
	6I-4364 ABFN		INSERT-LINER SEAT (1.655-MM THK)
	6I-4365 ABFN		INSERT-LINER SEAT (2.66-MM THK)
	5N-0093 ABFN		INSERT-LINER SEAT (2.71-MM THK)
	6I-4366 ABFN		INSERT-LINER SEAT (2.76-MM THK)
	101-0524 ABFN		INSERT-LINER SEAT (5.16-MM THK)
	101-0523 ABFN		INSERT-LINER SEAT (5.21-MM THK)
	101-0525 ABFN		INSERT-LINER SEAT (5.26-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	N		FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK REFER TO SEBF8076 IN SISWEB
	Y		SEPARATE ILLUSTRATION

#M00903110032

396-8374: CYLINDER HEAD AS

CYLINDER HEAD AS

396-8374 CYLINDER HEAD AS
S/N HPC1-UP
PART OF 396-8375 CYLINDER HEAD GP

i04941680 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	122-7375	[24]	GUIDE-VALVE (STANDARD)
	122-0447 AB		GUIDE-VALVE (0.51-MM OS)
	122-8612 AB		GUIDE-VALVE (0.13-MM OS)
2.	216-5582	[7]	BUSHING (STANDARD)
	217-0751 AB		BUSHING (0.25-MM OS)
	217-0752 AB		BUSHING (0.762-MM OS)
	261-3429 AB		BUSHING (1.778-MM OS)
	261-3430 AB		BUSHING (1.27-MM OS)
3.	226-5561	[12]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
	288-4883 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
	AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
4.	263-4920	[6]	SLEEVE-INJECTOR (INLET)
5.	280-3979	[12]	INSERT-VALVE SEAT (INLET)(STANDARD)
	288-4881 AB		INSERT-VALVE SEAT (INLET)(0.51-MM OS)
	288-4882 AB		INSERT-VALVE SEAT (0.76-MM OS, INLET)
6.	9X-7430	[6]	SEAL-O-RING
7.	166-2904	[12]	SEAL-O-RING
8.	3B-0623	[36]	PLUG-CUP
9.	3B-0645	[2]	PLUG-CUP
10.	8T-6757	[3]	PLUG-PIPE
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED

#M00903110033

425-7738: CYLINDER HEAD AS

CYLINDER HEAD AS

425-7738 CYLINDER HEAD AS
S/N N9Z1-UP
PART OF 468-0433 CYLINDER GP-RIPPER

i07349371 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	165-9283	[1]	SEAL-LIP TYPE
2.	170-9841	[1]	SEAL-BUFFER
3.	323-2476	[1]	BUSHING
4.	338-2447	[1]	SEAL-U-CUP
5.	425-7736	[1]	HEAD
6.	340-9323	[1]	SEAL-O-RING

#M00903110034

369-4607: CYLINDER HEAD GP

CYLINDER HEAD GP

369-4607 CYLINDER HEAD GP
S/N HPC1-UP
PART OF 388-3923 ENGINE AR-CORE

i05056550 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	359-1439	[48]	SEAL AS-WATER
2.	6I-4025	[32]	FASTENER GP-CYLINDER HEAD (MARKED Y)
			(EACH INCLUDES)
	5H-1504	[1]	WASHER-HARD (20X33.5X5-MM THK)
	124-1855	[1]	BOLT-12 POINT HEAD (3/4-16X7.638-IN)
3.	106-1792	[24]	STUD-TAPERLOCK (3/8-16X4-IN)
4.	106-5673	[20]	FASTENER GP-CYLINDER HEAD (MARKED X)
			(EACH INCLUDES)
	5H-1504	[1]	WASHER-HARD (20X33.5X5-MM THK)
	124-1854	[1]	BOLT-12 POINT HEAD (3/4-16X8.5-IN)
5.	225-3099	[2]	GASKET-CYLINDER HEAD
6.	445-8643	[1]	PANEL
7.	396-8375 CY	[2]	CYLINDER HEAD GP
8.	183-3407	[10]	PLUG AS
			(EACH INCLUDES)
	9S-8004	[1]	PLUG (9/16-18-THD)
	214-7568	[1]	SEAL-O-RING
9.	248-0036	[26]	BOLT-WASHER HEAD (3/8-16X6-IN)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#M00903110035

396-8375: CYLINDER HEAD GP

CYLINDER HEAD GP

396-8375 CYLINDER HEAD GP
S/N HPC1-UP
PART OF 369-4607 CYLINDER HEAD GP

i06754379 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2A-4429	[48]	LOCK-RETAINER
2.	6I-0928	[24]	WASHER-SPECIAL
3.	490-7200 C	[12]	VALVE-EXHAUST
4.	211-3122	[24]	SPRING-VALVE
5.	490-7198 C	[12]	VALVE-INLET
6.	247-9908	[24]	SPRING-VALVE
7.	396-8374 Y	[1]	CYLINDER HEAD AS
8.	163-2478	[24]	SEAL-VALVE STEM
9.	186-2001	[24]	ROTOCOIL AS
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#M00903110036

361-0069: DAMPER & PULLEY GP

DAMPER & PULLEY GP

361-0069 DAMPER & PULLEY GP
S/N HPC1-UP
PROVIDES A SINGLE FINNED VISCOUS DAMPER, ADAPTER, POLY-VEE CRANKSHAFT PULLEY, AND HARDWARE
PART OF 463-7471 ENGINE AR-COMPLETE

i04324257 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-6037	[1]	ADAPTER-DAMPER
2.	6N-7654	[1]	SPACER (6.312X8.18X0.312-IN THK)
3.	213-3199	[1]	DAMPER AS
4.	343-4609	[1]	PULLEY-CRANKSHAFT (8-GROOVE)
5.	1B-2886	[12]	BOLT (1/2-13X3.75-IN)
6.	253-2180	[8]	BOLT-SOCKET HEAD

#M00903110037

352-7936: DAMPER GP

DAMPER GP

352-7936 DAMPER GP
S/N HPC1-UP
PART OF 355-2286 GEAR GP-FRONT

i03875056 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	103-0126	[1]	DOWEL
2.	0S-1571	[8]	BOLT (3/8-16X1.75-IN)

#M00903110038

421-9597: DRIVE GP-ACCESSORY

DRIVE GP-ACCESSORY

421-9597 DRIVE GP-ACCESSORY
S/N N9Z1-UP
PART OF 421-9602 INSTALLATION AR-ENGINE

i07310637 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	190-3635	[1]	PULLEY (8-GROOVE)
2.	272-1889 Y	[1]	ALTERNATOR GP-CHARGING (24-VOLT, 150-AMPERE)
3.	472-0559 Y	[1]	COMPRESSOR GP-REFRIGERANT
4.	342-9964	[2]	SPACER (6.8X20X50.8-MM THK)
5.	342-9969	[4]	INSERT
6.	371-9676	[1]	BRACKET AS
7.	421-9509	[1]	GUARD
8.	421-9547	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
	8T-3612 M	[1]	NUT-WELD (M8X1.25-THD)
9.	421-9548	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
10.	191-6301 M	[2]	STUD-TAPERLOCK (M8X1.25X40-MM)
11.	198-4776	[4]	WASHER-HARD (8.8X20X8-MM THK)
12.	255-1281 M	[4]	BOLT-FLANGE HEAD (M8X1.25X100-MM)
13.	305-5385 M	[4]	BOLT (M8X1.25X50-MM)
14.	374-8480	[1]	BELT-SERPENTINE
15.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
16.	8T-6685 M	[4]	BOLT (M10X1.5X110-MM)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#M00903110039

471-4253: FASTENER GP-FLYWHEEL HOUSING

FASTENER GP-FLYWHEEL HOUSING

471-4253 FASTENER GP-FLYWHEEL HOUSING
S/N HPC1-UP
PART OF 463-7471 ENGINE AR-COMPLETE

i07311037 M0090311

4714253 FASTENER GP-FLYWHEEL HOUSING Parts scheme

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	249-8551	[2]	WASHER (15.62X30.3X1.27-MM THK)
2.	2L-1701	[1]	BOLT (5/8-18X1.5-IN)
3.	5P-8247	[1]	WASHER-HARD (17X32X3.5-MM THK)
4.	6F-7316	[1]	BOLT (5/8-18X1-IN)

Information:

BASIC ENGINE

CYLINDER BLOCK GP

Truck Engine News

The Primer Color Has Changed for All C15 and C18 Truck Engine Blocks {1201, 7559}
2012/12/21

Engine News

The Primer Color Has Changed for All C15 and C18 Commercial Engine Blocks {1201, 7559}
2012/12/21

A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}

Special Instruction

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}

Tool Operating Manual

Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}

Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}

420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}

Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Disassembly and Assembly

Bearing Clearance - Check
C27 and C32 Engines for Caterpillar Built Machines

Piston Cooling Jets - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines

Cylinder Liner - Install
C15 and C18 Engines for Caterpillar Built Machines

Cylinder Liner - Remove
C15 and C18 Engines for Caterpillar Built Machines

Camshaft Bearings - Remove
C15 and C18 Engines for Caterpillar Built Machines

Camshaft Bearings - Install
C15 and C18 Engines for Caterpillar Built Machines

Piston Cooling Jets - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Camshaft Bearings - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Liner - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Service Magazine

The Primer Color Has Changed for All C15 and C18 Machine Engine Blocks {1201, 7559}
2012/12/21

Caterpillar Parts SIS Catalog 24 :

348-9904 CYLINDER BLOCK AS

225-6052 CRANKSHAFT GP

469-2971 COVER GP-VALVE MECHANISM

486-5001 COVER GP-SOUND SUPPRESSION

468-5756 COVER GP-SOUND SUPPRESSION

380-9127 COVER GP-REAR HOUSING

133-3089 COVER GP-FLYWHEEL HOUSING

347-4107 COVER GP-CYLINDER BLOCK

349-2528 CYLINDER BLOCK GP

396-8374 CYLINDER HEAD AS

425-7738 CYLINDER HEAD AS

369-4607 CYLINDER HEAD GP

396-8375 CYLINDER HEAD GP

361-0069 DAMPER & PULLEY GP

352-7936 DAMPER GP

421-9597 DRIVE GP-ACCESSORY

Truck sale:

Caterpillar B312-42, schaufel, Bau-Und Bergbauausrüstung
- bucket
FABICK CAT

7.500

Caterpillar SB452.420.HAMMER, ag - hammer, Bau-Und Bergbauausrüstung
- hammer
CASHMAN EQUIPMENT CO.

Caterpillar 242 C3H2, Kompaktlader, Bau-Und Bergbauausrüstung

16,000

Caterpillar 242, Construction
- Skid Steer Loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC

38,000

Caterpillar 242, Construction
- Skid Steer Loaders
MUSTANG RENTAL SERVICES