421-1287 SEAT GP-SUSPENSION -DELUXE S/N N9Z1-UP 24-VOLT PART OF 385-8714 SEAT & MOUNTING GP 24 MOTOR GRADER

OPERATOR STATION

SEAT GP

0. 421-1287 SEAT GP-SU
1. 489-6481 SEAT GP-SU

SUPPORT GP

2. 345-1271 SUPPORT GP
3. 345-1272 SUPPORT GP

SEAT GP

4. 256-8768 SUSPENSION

CAB GP

5. 471-9216 TRIM GP-CA

AIR CONDITIONER GP

6. 465-7631 VALVE GP-W
7. 471-1187 VALVE GP-W

WASHER GP-WINDOW

8. 369-0448 WASHER GP-

WINDOW GP

9. 8X-8967 WINDOW GP-
0. INFORMATION

MOTOR GRADER 24 MOTOR GRADER N9Z
24 Motor Grader N9Z00001-UP (MACHINE) POWERED BY C27 Engine M0090311 24 N9Z (2018)

OPERATOR STATION

SEAT GP

421-1285 SEAT GP-SUSPENSION

421-1286 SEAT GP-SUSPENSION

421-1287 SEAT GP-SUSPENSION

489-6481 SEAT GP-SUSPENSION

256-8768 SUSPENSION GP-SEAT

#M00903110690

421-1287: SEAT GP-SUSPENSION

SEAT GP-SUSPENSION

421-1287 SEAT GP-SUSPENSION -DELUXE
S/N N9Z1-UP
24-VOLT
PART OF 385-8714 SEAT & MOUNTING GP

i06919144 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	256-8768 Y	[1]	SUSPENSION GP-SEAT
2.	498-4463	[1]	KIT-LITERATURE HOLDER
	4K-9429	[6]	RIVET-POP
	5P-7957	[1]	LANYARD
	173-2052	[1]	RETAINER
	178-7907	[1]	HOLDER (LITERATURE)
3.	489-6504 Y	[1]	SEAT GP (DELUXE)
4.	173-7035	[1]	KIT-SLIDER BLOCK (SUSPENSION SEAT)
			(INCLUDES WASHERS, BOLT, BLOCKS & SETSCREWS)
	Y		SEPARATE ILLUSTRATION

#M00903110691

489-6481: SEAT GP-SUSPENSION

SEAT GP-SUSPENSION

489-6481 SEAT GP-SUSPENSION
S/N N9Z1-UP
PART OF 421-1285 SEAT GP-SUSPENSION

i06718513 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4908 M	[4]	BOLT (M8X1.25X25-MM)
2.	229-1494	[1]	EXTENSION GP-BACKREST (CLOTH)
	117-4491	[1]	ROD
3.	277-8103	[3]	PLUG
4.	355-3016	[1]	PLATE AS
5.	488-2137	[1]	KIT-SHAFT (RECLINER)
			(INCLUDES SHAFT, CABLE AS, LEVERS, RECLINERS & BOLT)
6.	389-0879	[1]	PAN-SEAT BACK
7.	488-1670	[1]	PAN AS
8.	436-1687	[1]	KIT-LATCH (SEAT ADJUSTMENT)
			(INCLUDES BOLTS, LATCHES, RODS, SPRINGS & WASHERS)
9.	436-1688	[1]	KIT-SEAT (TILT)
			(INCLUDES RETAINERS, ROD, SPRINGS & WASHERS)
10.	443-8573	[1]	KIT-HANDLE (SEAT ADJUSTMENT)
			(INCLUDES ROD, LEVERS, SPRINGS & WASHERS)
11.	446-0635	[1]	KIT-SEAT CUSHION (CLOTH)
			(INCLUDES CUSHIONS, SCREWS, SEAT PAN & OPERATOR STATION HARNESS)
	M		METRIC PART

#M00903110692

345-1271: SUPPORT GP-CONTROL

SUPPORT GP-CONTROL

345-1271 SUPPORT GP-CONTROL -JOYSTICK, RH
S/N N9Z1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK

i04040268 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	172-8591 M	[10]	NUT-CLIP (M6X1-THD)
2.	8X-1386	[1]	SPACER (12.2X23X22-MM THK)
3.	233-3248	[2]	BUSHING
4.	233-3252	[1]	SHAFT AS
5.	233-3270	[1]	SUPPORT AS (RH)
6.	233-3275	[1]	BRACKET AS (RH)
7.	251-2247	[2]	GROMMET
8.	252-1805 Y	[1]	CUSHION GP-ARM
9.	252-1808	[1]	SUPPORT AS (RH)
	3G-0622	[2]	RING-RETAINING
	7X-0605	[2]	WASHER-HARD (13X28X1.6-MM THK)
	9X-2044 M	[2]	SCREW-TRUSS HEAD (M6X1X16-MM)
	114-6658	[2]	WASHER (6.5X17X1-MM THK)
	294-1001	[1]	PLATE AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
10.	253-3482	[1]	KNOB AS (ARMREST ADJUSTMENT)
11.	253-3483	[1]	PLATE AS
12.	253-3484	[2]	WASHER (13X46X3.5-MM THK)
13.	292-0609 Y	[1]	ARMREST GP (RH)
14.	456-1559	[1]	ADJUSTER AS
15.	345-1273	[1]	COVER
16.	345-1274	[1]	COVER
17.	346-0626	[1]	BRACKET
18.	346-9581	[1]	FILM-IDENTIFICATION (OPERATOR CONTROLS, RH)
19.	114-6658	[10]	WASHER (6.5X17X1-MM THK)
20.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
21.	7J-5925	[1]	PIN-COTTER
22.	7X-0578	[2]	WASHER-HARD (10.2X32X2.5-MM THK)
23.	8T-4200 M	[3]	BOLT (M8X1.25X16-MM)
24.	8T-4224	[10]	WASHER-HARD (8.8X16X2-MM THK)
25.	8T-4908 M	[7]	BOLT (M8X1.25X25-MM)
26.	9X-2043 M	[2]	SCREW-TRUSS HEAD (M6X1X14-MM)
27.	9X-2045 M	[10]	SCREW-TRUSS HEAD (M6X1X20-MM)
28.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
29.	8T-6936 D		SEAL (0.1-M EACH)
	D		ORDER BY THE METER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#M00903110693

345-1272: SUPPORT GP-CONTROL

SUPPORT GP-CONTROL

345-1272 SUPPORT GP-CONTROL -JOYSTICK, LH
S/N N9Z1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK

i04040269 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	172-8591 M	[10]	NUT-CLIP (M6X1-THD)
2.	8X-1386	[1]	SPACER (12.2X23X22-MM THK)
3.	233-3227	[1]	SUPPORT AS (LH)
4.	233-3248	[2]	BUSHING
5.	233-3252	[1]	SHAFT AS
6.	251-2247	[1]	GROMMET
7.	252-1805 Y	[1]	CUSHION GP-ARM
8.	252-1807	[1]	SUPPORT AS (LH)
	3G-0622	[2]	RING-RETAINING
	7X-0605	[2]	WASHER-HARD (13X28X1.6-MM THK)
	9X-2044 M	[2]	SCREW-TRUSS HEAD (M6X1X16-MM)
	114-6658	[2]	WASHER (6.5X17X1-MM THK)
	294-1001	[1]	PLATE AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
9.	253-3482	[1]	KNOB AS (ARMREST ADJUSTMENT)
10.	253-3483	[1]	PLATE AS
11.	253-3484	[2]	WASHER (13X46X3.5-MM THK)
12.	272-8329	[1]	BRACKET AS (LH)
13.	292-0617 Y	[1]	ARMREST GP (LH)
14.	456-1559	[1]	ADJUSTER AS
15.	345-1275	[1]	COVER
16.	345-1276	[1]	COVER
17.	346-0627	[1]	BRACKET
18.	346-9580	[1]	FILM-IDENTIFICATION (OPERATOR CONTROLS, LH)
19.	114-6658	[10]	WASHER (6.5X17X1-MM THK)
20.	5C-9553 M	[2]	BOLT (M6X1X16-MM)
21.	7J-5925	[1]	PIN-COTTER
22.	7X-0578	[2]	WASHER-HARD (10.2X32X2.5-MM THK)
23.	8T-4200 M	[3]	BOLT (M8X1.25X16-MM)
24.	8T-4224	[10]	WASHER-HARD (8.8X16X2-MM THK)
25.	8T-4908 M	[7]	BOLT (M8X1.25X25-MM)
26.	9X-2043 M	[2]	SCREW-TRUSS HEAD (M6X1X14-MM)
27.	9X-2044 M	[10]	SCREW-TRUSS HEAD (M6X1X16-MM)
28.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
29.	8T-6936 D		SEAL (0.1-M EACH)
	D		ORDER BY THE METER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#M00903110694

256-8768: SUSPENSION GP-SEAT

SUSPENSION GP-SEAT

256-8768 SUSPENSION GP-SEAT -AIR
S/N N9Z1-UP
24-VOLT
PART OF 421-1285, 421-1286, 421-1287 SEAT GP-SUSPENSION

i05353971 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3P-9900	[5]	WASHER (10.5X30X3-MM THK)
2.	4B-4278	[2]	WASHER (10.2X20.5X1.6-MM THK)
3.	4V-8577	[12]	BEARING
5.	101-0003	[26]	FASTENER
6.	145-0326	[1]	FILM-INSTRUCTION (SEAT ADJUSTMENT)
7.	164-1234	[1]	PLATE
8.	169-7380	[1]	BOLT-SOCKET HEAD (3/8-16X0.375-IN)
10.	192-7752	[4]	SHAFT AS
11.	192-7755	[1]	HOUSING AS (LOWER)
12.	314-5274 C	[1]	SHAFT (INNER)
13.	192-7767	[1]	SCISSORS AS
14.	192-7783	[1]	TOGGLE AS (WIDE)
15.	192-7787	[1]	TOGGLE AS (NARROW)
16.	192-7790	[1]	HOUSING AS (UPPER)
17.	192-7795	[1]	BOOT
18.	433-5754	[1]	HARNESS AS-WIRING (SEAT AIR COMPRESSOR)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	5P-4571	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
	097-7234	[2]	TERMINAL-BLADE (18-GA TO 22-GA)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	1P-0810 B		TAPE-ELECTRICAL
	329-3734 B		TAPE-ELECTRICAL
19.	192-7810	[1]	SPRING AS-AIR
	5P-4423	[1]	ELBOW
20.	192-7812	[1]	BOLT-SPECIAL
21.	192-7820	[3]	BUMPER
22.	314-5275 C	[1]	SHAFT (OUTER)
25.	108-4311	[1]	SCREW-MACHINE (3/8-16X0.75-IN)
26.	2K-4973	[8]	LOCKNUT (3/8-16-THD)
27.	3J-4818	[1]	LOCKWASHER
28.	5C-2890 M	[3]	NUT (M6X1-THD)
29.	5P-6010 D		TUBE (0.257-M)
29A.	5P-6010 D		TUBE (0.356-M)
30.	8T-9371	[1]	BOLT (3/8-16X0.5-IN)
31.	211-5358 E		CONDUIT-FLEXIBLE (26.7-CM)
31A.	211-5358 E		CONDUIT-FLEXIBLE (35.6-CM)
34.	442-8151	[1]	CLIP-CABLE
35.	3S-2093	[4]	STRAP-CABLE

			AVAILABLE REPAIR KIT(S):
	192-7799	[1]	KIT-AIR VALVE & SWITCH (SEAT)
			(INCLUDES KNOB ASSEMBLY)
	212-7779 H	[1]	KIT-SHOCK ABSORBER (SUSPENSION SEAT)
			(INCLUDES, LOCKNUTS, BALL, LOCKWASHER, STRAP, SPRING, CLAMP, ADJUSTERS, BOLTS, BEARINGS, WASHERS, SHOCK ABSORBER,
			BRACKETS, KIT, CABLE ASSEMBLY & KNOB)
	211-9294	[1]	KIT-TETHER (SEAT)
			(INCLUDES TETHER)
	213-5170	[1]	KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)
			(INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
	212-7783 H	[1]	KIT-PULLEY
			(INCLUDES PIN, PULLEY, RETAINING RING, SETSCREW & SPRING)
	397-6405	[1]	KIT-SEAT AIR COMPRESSOR
			(INCLUDES STRAP, SCREWS, COMPRESSOR AS, BRACKET-MOUNT & HARNESS ASSEMBLIES)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	H		KITS MARKED H SERVICE PART(S) MARKED H
	M		METRIC PART

#M00903110695

471-9216: TRIM GP-CAB

TRIM GP-CAB

471-9216 TRIM GP-CAB
S/N N9Z1-UP
PART OF 361-3130 CAB AR

i07319822 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6G-2395	[2]	DOOR GP (AIR VENTED)
			(EACH INCLUDES)
	6G-7222	[2]	ROLLER
2.	6G-2396	[2]	GASKET
3.	422-2152	[4]	LOUVER AS-VENT
4.	164-8473	[2]	LOUVER AS
5.	171-4047	[15]	LOUVER AS-VENT
6.	218-0666	[2]	LOUVER AS
7.	253-2417	[1]	LOUVER AS
8.	265-6598	[1]	DUCT
9.	266-7035	[1]	COVER (RH)
10.	266-7038	[1]	DUCT
11.	266-7039	[2]	DUCT
12.	278-0589	[1]	COVER
13.	278-0590	[1]	DUCT AS
14.	282-0818	[1]	DUCT
15.	283-7968	[1]	DUCT
16.	286-5683	[4]	GASKET
17.	373-4446	[1]	PLUG
18.	424-8957	[1]	PANEL-COVER
19.	437-8991	[2]	NET AS (STORAGE)
20.	471-9224	[1]	FLOOR MAT AS
21.	471-9225	[1]	COVER (RH)
22.	471-9226	[1]	COVER (LH)
23.	471-9228	[1]	DUCT AS
24.	475-3330	[1]	DUCT AS
25.	506-6880	[1]	PLENUM AS (DASH)
26.	508-9353	[1]	LINER
27.	510-7323	[1]	PLATE
28.	104-2091	[38]	SCREW-FLAT HEAD (6-20X0.5-IN)
29.	114-6658	[27]	WASHER (6.5X17X1-MM THK)
30.	170-4057 M	[7]	INSERT-THREADED (M6X1-THD)
31.	195-0936 M	[4]	INSERT-THREADED (M6X1-THD)
32.	286-5680	[2]	GASKET
33.	2V-3726	[1]	BUMPER
34.	3G-3265	[24]	RIVET
35.	446-1483 M	[3]	SCREW-TRUSS HEAD (M6X1X45-MM)
36.	172-8591 M	[14]	NUT-CLIP (M6X1-THD)
37.	7X-0579	[25]	WASHER-HARD (8.8X25.5X2-MM THK)
38.	7X-0818 M	[6]	BOLT (M8X1.25X45-MM)
39.	9N-0869	[6]	WASHER-HARD (8.8X25.5X2-MM THK)
40.	9X-2038	[7]	WASHER (7X19X2-MM THK)
41.	9X-2042 M	[6]	SCREW-TRUSS HEAD (M6X1X12-MM)
42.	9X-2043 M	[2]	SCREW-TRUSS HEAD (M6X1X14-MM)
43.	9X-2044 M	[32]	SCREW-TRUSS HEAD (M6X1X16-MM)
44.	9X-2045 M	[5]	SCREW-TRUSS HEAD (M6X1X20-MM)
45.	9X-2046 M	[1]	SCREW-TRUSS HEAD (M6X1X35-MM)
46.	9X-2480 M	[8]	BOLT (M6X1X45-MM)
47.	219-4361 E		TUBING (FLEX)(31-CM EACH)
48.	5P-5969 D		SEAL (1.6-M)
48A.	5P-5969 D		SEAL (0.4-M EACH)
49.	5P-5637 D		SEAL (0.2-M EACH)
50.	121-9870 M	[4]	SCREW-MACHINE (M6X1X40-MM)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#M00903110696

465-7631: VALVE GP-WATER

VALVE GP-WATER

465-7631 VALVE GP-WATER
S/N N9Z1-UP
PART OF 471-1187 VALVE GP-WATER

i06507758 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	279-0850	[1]	ACTUATOR (ELECTRONIC)
2.	450-4968	[3]	SCREW-HEX HEAD (8-16X0.5-IN)
3.	465-7609	[3]	SCREW-WASHER HEAD (8-16X2.3-IN)
4.	465-7610	[1]	VALVE & MOUNTING AS-WATER
5.	311-3520	[3]	SCREW-HEX HEAD (8-16X0.5-IN)

#M00903110697

471-1187: VALVE GP-WATER

VALVE GP-WATER

471-1187 VALVE GP-WATER
S/N N9Z1-UP
PART OF 507-2671 AIR CONDITIONER GP

i06507562 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	262-4930	[1]	TUBE AS
2.	267-3997	[1]	TUBE
3.	465-7631 Y	[1]	VALVE GP-WATER (ACTUATOR)
	Y		SEPARATE ILLUSTRATION

#M00903110698

369-0448: WASHER GP-WINDOW

WASHER GP-WINDOW

369-0448 WASHER GP-WINDOW
S/N N9Z1-UP
PART OF 370-0470 HYDRAULIC AR

i07297282 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	469-5745	[2]	VALVE-CHECK
2.	473-6640	[1]	PLATE
3.	524-3116	[2]	TANK GP-WINDOW WASHER
			(EACH INCLUDES)
	388-9379	[1]	CAP-VENTED
	523-9432	[1]	PUMP AS-WASHER (24-VOLT)
4.	131-3540 M	[4]	LOCKNUT (M8X1.25-THD)
5.	7X-2537 M	[4]	BOLT (M8X1.25X35-MM)
6.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
8.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
9.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
10.	8T-4224	[8]	WASHER-HARD (8.8X16X2-MM THK)
11.	9X-8582	[4]	CLIP
12.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
13.	4D-8123	[2]	CLIP
14.	144-0195 E		HOSE (195-CM)
14A.	144-0195 E		HOSE (181-CM)
14B.	144-0195 E		HOSE (33.8-CM)
14C.	144-0195 E		HOSE (31.9-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#M00903110699

8X-8967: WINDOW GP-CAB

WINDOW GP-CAB

8X-8967 WINDOW GP-CAB
S/N N9Z1-UP
TINTED WINDOW
PART OF 361-3130 CAB AR

i00427419 M0090311

For full view, you need register

Parts for your 24 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-2093	[1]	GLASS (5-MM THK)
2.	117-2094	[2]	GLASS (SIDE, TOP)
3.	117-2095	[2]	GLASS (BOTTOM, SIDE)
4.	117-3169	[1]	FILM-WINDOW
5.	119-0782	[1]	GLASS (10-MM THK)
6.	137-1282	[2]	RETAINER
7.	137-1283	[1]	RETAINER
8.	137-1284	[1]	RETAINER
9.	8T-4121	[35]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4137 M	[35]	BOLT (M10X1.5X20-MM)
11.	122-8341 E		SEAL (587-CM)
12.	5P-5768 D		SEAL (4.1-M)
12A.	5P-5768 D		SEAL (2.2-M EACH)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART