ELECTRICAL AND STARTING SYSTEM
WIRING GPPOWER TRAIN
ACTUATOR GPAXLE GP
TRANSMISSION GP
CONTROL GP-TRACTION
CONTROL GP-TRANSMISSION HYD
TRANSMISSION GP
DIFFERENTIAL & BEVEL GEAR GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP
#M00906550420
339-6271: WIRING GP-UNIT INJECTOR
339-6271 WIRING GP-UNIT INJECTOR
S/N ENG1-UP
PART OF 516-8140, 516-8141 ENGINE AR-COMPLETE
FOR USE WITH @@@@@335-2317@@@@@, ENGINES WITHOUT COMPRESSION BRAKE
AN ATTACHMENT
S/N ENG1-UP
PART OF 516-8140, 516-8141 ENGINE AR-COMPLETE
FOR USE WITH @@@@@335-2317@@@@@, ENGINES WITHOUT COMPRESSION BRAKE
AN ATTACHMENT
For full view, you need register
Parts for your 770G QUARRY TRUCK:
CATERPILLAR SIS#M00906550421
346-6706: WIRING GP-UNIT INJECTOR
346-6706 WIRING GP-UNIT INJECTOR
S/N ENG1-UP
PART OF 516-8134, 516-8135, 550-4632 ENGINE AR-COMPLETE
FOR USE WITH COOLANT TEMP JUMPER HARNESS
CANNOT BE USED WITH NON-BRAKES AND/OR INTAKE VALVE ACTUATION
AN ATTACHMENT
S/N ENG1-UP
PART OF 516-8134, 516-8135, 550-4632 ENGINE AR-COMPLETE
FOR USE WITH COOLANT TEMP JUMPER HARNESS
CANNOT BE USED WITH NON-BRAKES AND/OR INTAKE VALVE ACTUATION
AN ATTACHMENT
For full view, you need register
Parts for your 770G QUARRY TRUCK:
CATERPILLAR SIS#M00906550422
338-1913: ACTUATOR GP-ROTARY
338-1913 ACTUATOR GP-ROTARY -NOX REDUCTION SYSTEM
S/N ENG1-UP
PART OF 337-7323 VALVE GP-EXHAUST GAS (NRS)
AN ATTACHMENT
S/N ENG1-UP
PART OF 337-7323 VALVE GP-EXHAUST GAS (NRS)
AN ATTACHMENT
For full view, you need register
Parts for your 770G QUARRY TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 342-0636 Y | [1] | VALVE GP-SOLENOID (NOX REDUCTION SYSTEM) | |
| Y | SEPARATE ILLUSTRATION | |||
#M00906550423
270-5381: AXLE & MOUNTING GP
For full view, you need register
Parts for your 770G QUARRY TRUCK:
CATERPILLAR SIS#M00906550424
351-5594: CASE & PARTS GP-PLANETARY
351-5594 CASE & PARTS GP-PLANETARY
S/N D5A1-UP
PART OF 303-9464 TRANSMISSION AR
S/N D5A1-UP
PART OF 303-9464 TRANSMISSION AR
For full view, you need register
Parts for your 770G QUARRY TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0852 | [11] | CAP-DUST | |
| 2. | 7G-6373 | [1] | GASKET | |
| 3. | 353-9446 | [1] | BRACKET | |
| 5. | 9G-9928 | [1] | FLANGE-ONE PIECE | |
| 6. | 104-6729 | [1] | RETAINER | |
| 7. | 360-2191 | [2] | ADAPTER | |
| 8. | 249-7054 | [1] | COVER | |
| 9. | 482-4234 | [1] | CASE-TRANSMISSION | |
| 11. | 0S-1585 | [2] | BOLT (1/2-13X1.5-IN) | |
| 12. | 6V-4248 M | [1] | BOLT (M10X1.5X25-MM) | |
| 13. | 0S-1621 | [1] | BOLT (1/2-13X1-IN) | |
| 14. | 104-6730 | [1] | GASKET | |
| 15. | 148-8325 | [10] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8641 | [1] | CONNECTOR | ||
| 16. | 164-5567 | [11] | COUPLER AS-QUICK DISCONNECT (MALE) | |
| (EACH INCLUDES) | ||||
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 17. | 1D-4569 | [2] | BOLT (1/2-13X4.25-IN) | |
| 18. | 2Y-5829 M | [1] | NUT (M10X1.5-THD) | |
| 19. | 1P-4579 | [2] | FLANGE-HALF | |
| 20. | 250-9090 I | [1] | HOSE AS | |
| 21. | 6V-3265 | [1] | CLIP | |
| 22. | 277-1873 | [4] | CLIP (LADDER) | |
| 23. | 5D-6176 | [1] | COVER | |
| 24. | 5P-5846 | [4] | SEAL-O-RING | |
| 25. | 5P-8245 | [18] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 26. | 6V-5696 M | [4] | BOLT (M12X1.75X80-MM) | |
| 27. | 6V-6317 M | [26] | BOLT (M10X1.5X20-MM) | |
| 28. | 6V-7673 M | [4] | BOLT (M12X1.75X50-MM) | |
| 29. | 8T-0106 M | [4] | BOLT (M12X1.75X100-MM) | |
| 30. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 31. | 335-3982 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 6V-8627 | [1] | ELBOW | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 228-7088 | [1] | SEAL-O-RING | ||
| 32. | 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | |
| 33. | 4P-7428 | [1] | CLIP (LADDER) | |
| 34. | 0S-1620 | [1] | BOLT (1/2-13X0.75-IN) | |
| 35. | 130-5301 | [1] | CLIP | |
| 36. | 330-9732 | [1] | ADAPTER AS | |
| 5P-6944 | [1] | ADAPTER | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 37. | 162-0177 | [1] | PLUG AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#M00906550425
348-4638: CONTROL AR-TRACTION
348-4638 CONTROL AR-TRACTION
S/N KD21-UP
PART OF 509-3017 OPTION AR-ELECTRICAL, 444-8451 OPTION AR-MACHINE
CANNOT BE USED WITH @@@@@364-1963@@@@@
AN ATTACHMENT
S/N KD21-UP
PART OF 509-3017 OPTION AR-ELECTRICAL, 444-8451 OPTION AR-MACHINE
CANNOT BE USED WITH @@@@@364-1963@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 770G QUARRY TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 336-1019 Y | [1] | CYLINDER & MTG GP-STEERING | ||
| 344-7155 Y | [2] | GEAR GP-SPEED SENSOR (TRACTION CONTROL) | ||
| 364-0713 Y | [1] | LINES GP-STEERING | ||
| 324-0871 Y | [1] | SWITCH GP-ROCKER (TRACTION CONTROL) | ||
| 310-3204 Y | [1] | WIRING GP-TRACTION CONTROL | ||
| 271-9383 J | [1] | CONFIGURATION-PREMIUM (SOFTWARE, TRACTION CONTROL SYS) | ||
| J | SEE DEALER FOR PRICING, INSTALLATION, AND ACTIVATION OF PREMIUM SOFTWARE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00906550426
364-1963: CONTROL AR-TRACTION
364-1963 CONTROL AR-TRACTION
S/N KD21-UP
PART OF 444-8450, 509-3016 OPTION AR-MACHINE
CANNOT BE USED WITH @@@@@348-4638@@@@@
AN ATTACHMENT
S/N KD21-UP
PART OF 444-8450, 509-3016 OPTION AR-MACHINE
CANNOT BE USED WITH @@@@@348-4638@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 770G QUARRY TRUCK:
CATERPILLAR SIS#M00906550427
363-0319: CONTROL GP-TRANSMISSION HYD
363-0319 CONTROL GP-TRANSMISSION HYD
S/N D5A1-UP
PART OF 303-9464 TRANSMISSION AR
S/N D5A1-UP
PART OF 303-9464 TRANSMISSION AR
For full view, you need register
Parts for your 770G QUARRY TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [13] | STRAP-CABLE | |
| 2. | 4P-7233 | [1] | GROMMET | |
| 3. | 6V-5221 M | [20] | BOLT (M8X1.25X80-MM) | |
| 4. | 7G-1595 | [2] | SLEEVE | |
| 5. | 249-7068 | [2] | ADAPTER-DRAIN | |
| 6. | 249-7070 Y | [1] | VALVE GP-RELIEF (TORQUE CONVERTER INLET) | |
| 7. | 258-8987 Y | [8] | VALVE GP-MODULATING (24-VOLT)(TRANSMISSION HYDRAULIC CONTROL) | |
| 8. | 292-0076 | [1] | SLEEVE | |
| 9. | 303-1984 | [1] | PLATE | |
| 10. | 303-1986 Y | [1] | VALVE GP-RELIEF (TRANSMISSION LUBRICATION) | |
| 11. | 303-1989 I | [4] | HOSE AS | |
| 12. | 303-2296 | [1] | MANIFOLD | |
| 13. | 399-2322 C | [1] | HARNESS AS-SENSOR (TORQUE CONVERTER OUTPUT) | |
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [6] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 240-7878 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 14. | 341-8381 I | [4] | HOSE AS | |
| 15. | 343-8785 I | [1] | HOSE AS | |
| 16. | 344-0518 I | [1] | HOSE AS | |
| 17. | 130-5300 C | [2] | CLIP | |
| 18. | 132-5789 | [9] | CLIP (LADDER) | |
| 19. | 399-2323 C | [1] | HARNESS AS-TRANSMISSION | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 331-4226 | [9] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 281-3121 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 8T-8730 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-2109 E | TUBE-HEAT SHRINK (6.4-MM DIA)(10-CM) | |||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(60-CM) | |||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 20. | 4P-7581 | [2] | CLIP (LADDER) | |
| 21. | 4P-8134 | [2] | CLIP (LADDER) | |
| 22. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 23. | 6V-2317 M | [2] | BOLT (M8X1.25X30-MM) | |
| 24. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 25. | 6V-5220 M | [1] | BOLT (M8X1.25X65-MM) | |
| 26. | 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | |
| 27. | 6V-6317 M | [2] | BOLT (M10X1.5X20-MM) | |
| 28. | 5P-8210 | [6] | SEAL-O-RING | |
| 29. | 8S-9191 | [4] | BOLT (3/8-16X4-IN) | |
| 30. | 9C-2741 | [1] | SPACER (13.94X17.14X34-MM THK) | |
| 31. | 9M-1974 | [25] | WASHER-HARD (8.8X16X2-MM THK) | |
| 32. | 347-4734 C | [1] | CLIP | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00906550428
310-5754: COVER GP-SHIPPING
For full view, you need register
Parts for your 770G QUARRY TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6P-8339 | [1] | LOCK | |
| 2. | 7R-3027 | [1] | CAP-DUST | |
| 3. | 8T-8737 | [4] | PLUG-SEAL | |
| 4. | 117-2927 | [1] | COVER-SHIPPING | |
| 5. | 150-6251 | [1] | PLUG | |
| 6. | 0L-1143 | [1] | BOLT (3/8-16X2.5-IN) | |
| 7. | 0S-0509 | [5] | BOLT (3/8-16X0.75-IN) | |
| 8. | 0S-1621 | [4] | BOLT (1/2-13X1-IN) | |
| 9. | 0T-0573 | [5] | BOLT (3/8-16X2.75-IN) | |
| 10. | 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | |
| 11. | 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | |
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 12. | 148-8411 | [1] | PLUG AS | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 13. | 1S-2176 | [1] | COVER | |
| 14. | 1S-3730 | [1] | COVER | |
| 15. | 2J-2668 | [1] | COVER-FLANGE | |
| 16. | 4J-0524 | [1] | SEAL-O-RING | |
| 17. | 5D-6176 | [1] | COVER | |
| 18. | 5M-2894 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 5P-5846 | [1] | SEAL-O-RING | |
| 20. | 8E-7365 | [1] | GASKET | |
| 21. | 8M-4433 | [1] | SEAL-O-RING | |
| 22. | 9M-6974 | [1] | GASKET | |
| 23. | 9S-8752 | [6] | NUT-FULL (3/8-16-THD) | |
#M00906550429
341-1540: DIFFERENTIAL & BEVEL GEAR GP
341-1540 DIFFERENTIAL & BEVEL GEAR GP
S/N KD21-UP
PART OF 307-7407 POWER TRAIN AR
S/N KD21-UP
PART OF 307-7407 POWER TRAIN AR
For full view, you need register
Parts for your 770G QUARRY TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-8393 | [1] | CUP-BEARING | |
| 2. | 8C-3084 | [1] | SEAL-LIP TYPE | |
| 3. | 8W-3064 | [2] | RING-ADJUSTMENT | |
| 4. | 9K-4454 | [2] | LOCK | |
| 5. | 237-2895 | [1] | RETAINER | |
| 6. | 237-4770 | [1] | COVER | |
| 7. | 248-0833 | [1] | PLUG AS-DRAIN | |
| 3S-9233 | [1] | SEAL-O-RING | ||
| 5L-4759 | [1] | SEAL-O-RING | ||
| 8. | 287-4002 | [1] | YOKE | |
| 9. | 308-3183 Y | [1] | DIFFERENTIAL GP | |
| 10. | 308-3184 | [1] | HOUSING | |
| 11. | 308-3522 | [1] | HOUSING | |
| 12. | 340-8554 | [1] | SET-BEVEL GEAR | |
| 13. | 341-1548 B | [1] | SHIM PACK (INCLUDES 13-SHIMS) | |
| 14. | 348-4337 | [1] | RETAINER | |
| 15. | 348-4649 B | [1] | SHIM PACK (INCLUDES 13-SHIMS) | |
| 16. | 1B-4034 | [1] | CONE-BEARING | |
| 17. | 1J-2860 | [1] | CUP-BEARING | |
| 18. | 1J-4757 | [1] | CONE-BEARING | |
| 19. | 2D-9457 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 20. | 2K-4472 | [1] | SEAL-O-RING | |
| 21. | 2M-9780 | [2] | SEAL-O-RING | |
| 22. | 3E-4356 | [16] | WASHER-HARD (17.5X30X6-MM THK) | |
| 23. | 4F-2041 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 24. | 5H-2824 | [1] | SEAL-O-RING | |
| 25. | 5P-8245 | [20] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 26. | 6V-0414 | [1] | CUP-BEARING | |
| 27. | 6V-0415 | [1] | CONE-BEARING | |
| 28. | 6V-3263 | [1] | SEAL-O-RING | |
| 29. | 6V-3303 M | [16] | BOLT (M16X2X60-MM) | |
| 30. | 6V-3531 M | [32] | BOLT (M20X2.5X50-MM) | |
| 31. | 6V-3822 M | [8] | BOLT (M10X1.5X35-MM) | |
| 32. | 6V-5050 | [1] | SEAL-O-RING | |
| 33. | 6V-5839 | [8] | WASHER (11X21X2.5-MM THK) | |
| 34. | 6V-7673 M | [18] | BOLT (M12X1.75X50-MM) | |
| 35. | 6V-8675 M | [2] | BOLT (M12X1.75X35-MM) | |
| 36. | 7M-8485 | [2] | SEAL-O-RING | |
| 37. | 8T-0070 M | [1] | BOLT (M20X2.5X120-MM) | |
| 38. | 8T-3282 | [32] | WASHER-HARD (22X35X3.5-MM THK) | |
| 39. | 9S-4181 | [1] | PLUG (1-5/16-12-THD) | |
| 40. | 9S-4183 | [1] | PLUG (1-1/16-12-THD) | |
| 41. | 9S-4190 | [2] | PLUG-O-RING (7/8-14-THD) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
