ELECTRICAL AND STARTING SYSTEM
WIRING GPPOWER TRAIN
DRIVE GP-FINALELECTRICAL AND STARTING SYSTEM
WIRING GP
#M00912930270
479-7817: WIRING GP-CONSOLE
479-7817 WIRING GP-CONSOLE -RH
S/N KFA1-UP; JHF1-UP
PART OF 479-7792 WIRING GP-CONSOLE
S/N KFA1-UP; JHF1-UP
PART OF 479-7792 WIRING GP-CONSOLE
For full view, you need register
Parts for your 330F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [2] | STRAP-CABLE | |
| 2. | 324-5732 | [1] | BRACKET | |
| 3. | 479-7822 | [1] | HARNESS AS-CONSOLE | |
| 3S-2093 | [4] | STRAP-CABLE | ||
| 7Y-3967 | [2] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 7Y-3963 | [1] | TERMINAL-BULLET (FEMALE) | ||
| 7Y-3965 | [1] | TUBE (RECEPTACLE TERMINAL) | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [6] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 342-2974 | [1] | CAP-CONNECTOR (6-PIN) | ||
| 4. | 9X-2042 M | [2] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| M | METRIC PART | |||
#M00912930271
328-0247: WIRING GP-CONVERTER
328-0247 WIRING GP-CONVERTER -12-VOLT, 10-AMPERE
S/N KFA1-UP; JHF1-UP
PART OF 494-8498 CONTROL & MONITOR GP-CAB
S/N KFA1-UP; JHF1-UP
PART OF 494-8498 CONTROL & MONITOR GP-CAB
For full view, you need register
Parts for your 330F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 475-2681 | [1] | CONVERTER-POWER (24-VOLT TO 12-VOLT)(10-AMPERE) | |
| 2. | 324-5771 | [2] | SOCKET-AUXILIARY POWER (12-VOLT) | |
| 3. | 336-5895 | [1] | BRACKET | |
| 4. | 170-2986 | [1] | GROMMET | |
| 5. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 7. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 8. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 9. | 369-0153 | [2] | WIRE AS (14-GA) | |
| 10. | 3S-2093 | [2] | STRAP-CABLE | |
| M | METRIC PART | |||
#M00912930272
504-3173: WIRING GP-DEF MODULE
504-3173 WIRING GP-DEF MODULE
PART OF 499-6634 MODULE AR-DIESEL EXHAUST FLUID
PART OF 499-6634 MODULE AR-DIESEL EXHAUST FLUID
For full view, you need register
Parts for your 330F EXCAVATOR:
CATERPILLAR SIS#M00912930273
374-4427: WIRING GP-ENGINE
For full view, you need register
Parts for your 330F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0846 M | [3] | BOLT (M6X1X14-MM) | |
| 2. | 6I-4200 M | [1] | BOLT (M10X1.5X16-MM) | |
| 3. | 100-4458 M | [1] | BOLT (M8X1.25X14-MM) | |
| 4. | 124-3815 M | [2] | BOLT (M8X1.25X16-MM) | |
| 5. | 217-0099 | [1] | SPACER (8.2X25X2-MM THK) | |
| 6. | 290-1993 | [3] | STRAP-CABLE | |
| 7. | 334-5091 | [1] | BRACKET | |
| 8. | 367-6803 | [3] | HARNESS AS-WIRING | |
| (EACH INCLUDES) | ||||
| 323-7347 | [1] | SEAL-O-RING | ||
| 332-7865 | [2] | TIE-CABLE | ||
| 9. | 376-4089 | [1] | BRACKET | |
| 10. | 381-3508 | [1] | BRACKET | |
| 11. | 388-4017 Y | [1] | HARNESS AS-SENSOR | |
| 12. | 433-4105 | [1] | BRACKET | |
| 13. | 433-4130 | [1] | BRACKET | |
| 14. | 232-1693 M | [1] | BOLT-FLANGE HEAD (M6X1X35-MM) | |
| 15. | 254-3633 M | [3] | BOLT-FLANGE HEAD (M6X1X16-MM, SELF LOCKING) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00912930274
342-3024: WIRING GP-FRONT
342-3024 WIRING GP-FRONT -GRADE CONTROL, BOOM
S/N KFA1-UP; JHF1-UP
PART OF 342-4270 BOOM AR-REACH
S/N KFA1-UP; JHF1-UP
PART OF 342-4270 BOOM AR-REACH
For full view, you need register
Parts for your 330F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [8] | STRAP-CABLE | |
| 2. | 095-9785 C | [1] | CLAMP-HOSE | |
| 3. | 111-4836 | [6] | CLIP | |
| 4. | 111-4837 | [3] | CLIP | |
| 5. | 111-4838 C | [1] | CLIP | |
| 6. | 116-0118 | [2] | CLIP | |
| 7. | 204-1611 C | [16] | STRAP (DUAL) | |
| 8. | 477-5034 C | [1] | HARNESS AS-CONTROL (BOOM) | |
| 8T-8729 | [1] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8730 | [1] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 8T-8737 | [5] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9X-3402 | [11] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 262-8088 E | HOSE (165-CM) | |||
| 9. | 7X-2621 M | [1] | BOLT (M10X1.5X12-MM) | |
| 10. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4133 CM | [1] | NUT (M10X1.5-THD) | |
| 12. | 8T-4195 CM | [1] | BOLT (M10X1.5X30-MM) | |
| 13. | 8T-4137 CM | [1] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#M00912930275
480-7390: WIRING GP-FRONT
480-7390 WIRING GP-FRONT -GRADE CONTROL, STICK
S/N KFA1-UP; JHF1-UP
PART OF 480-7392 STICK AR
S/N KFA1-UP; JHF1-UP
PART OF 480-7392 STICK AR
For full view, you need register
Parts for your 330F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [14] | STRAP-CABLE | |
| 2. | 7K-1181 | [2] | STRAP-CABLE | |
| 3. | 478-4298 | [1] | HARNESS AS-CONTROL (STICK) | |
| 8T-8729 | [1] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 3E-5165 | [1] | CAP AS-PROTECTION | ||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 243-5362 | [1] | CAP-DUST | ||
| 253-2695 | [1] | PLUG AS-CONNECTOR | ||
| 303-4244 | [1] | RECEPTACLE AS-CONNECTOR | ||
| 4. | 4P-7581 | [2] | CLIP (LADDER) | |
| 5. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 8T-4191 M | [2] | BOLT (M10X1.5X16-MM) | |
| 7. | 5P-8522 | [1] | GROMMET | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#M00912930276
479-7793: WIRING GP-PLATFORM
479-7793 WIRING GP-PLATFORM -OPERATOR
S/N KFA1-UP; JHF1-UP
PART OF 494-8498 CONTROL & MONITOR GP-CAB
S/N KFA1-UP; JHF1-UP
PART OF 494-8498 CONTROL & MONITOR GP-CAB
For full view, you need register
Parts for your 330F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 3S-2093 | [12] | STRAP-CABLE | |
| 3. | 6S-4039 | [1] | GROMMET | |
| 4. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 5. | 7K-1181 | [5] | STRAP-CABLE | |
| 6. | 111-4836 | [9] | CLIP | |
| 7. | 111-4837 | [1] | CLIP | |
| 8. | 116-0118 | [3] | CLIP | |
| 9. | 234-1122 | [1] | COVER | |
| 10. | 301-2981 | [1] | SWITCH AS-TOGGLE (SECONDARY SHUTDOWN) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 11. | 319-1260 | [2] | PANEL | |
| 12. | 328-0077 | [2] | CAP | |
| 13. | 328-0119 | [1] | SHEET | |
| 14. | 479-7823 | [1] | HARNESS AS-PLATFORM | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [13] | STRAP-CABLE | ||
| 8T-8737 | [6] | PLUG-SEAL | ||
| 9W-0852 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM) | |||
| 9X-3402 | [27] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [27] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8069 | [2] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 9X-3401 | [15] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [15] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 281-8803 | [7] | PLUG AS-CONNECTOR (3-PIN) | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 230-5008 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 455-0706 | [1] | SEAL-CONNECTOR | ||
| 328-0076 | [2] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 342-2972 | [1] | CAP-CONNECTOR (2-PIN) | ||
| 342-2973 | [6] | CAP-CONNECTOR (3-PIN) | ||
| 342-2978 | [1] | CAP-CONNECTOR (4-PIN) | ||
| 15. | 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
| 16. | 132-5789 | [3] | CLIP (LADDER) | |
| 17. | 204-1611 | [1] | STRAP (DUAL) | |
| 18. | 7X-2621 M | [3] | BOLT (M10X1.5X12-MM) | |
| 19. | 8T-0337 M | [2] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 20. | 8T-4121 | [20] | WASHER-HARD (11X21X2.5-MM THK) | |
| 21. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 22. | 8T-4137 M | [10] | BOLT (M10X1.5X20-MM) | |
| 23. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 24. | 204-1611 B | [1] | STRAP (DUAL) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#M00912930277
479-7790: WIRING GP-VALVE
For full view, you need register
Parts for your 330F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [6] | STRAP-CABLE | |
| 2. | 7K-1181 | [16] | STRAP-CABLE | |
| 3. | 342-3156 | [1] | BRACKET AS-VALVE | |
| 4. | 479-7820 | [1] | HARNESS AS-VALVE | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [12] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8730 | [18] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [6] | STRAP-CABLE | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 9X-3402 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [12] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [6] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [8] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| 237-0227 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 243-4508 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 5. | 132-5789 | [9] | CLIP (LADDER) | |
| 6. | 4P-7581 | [6] | CLIP (LADDER) | |
| 7. | 7I-2673 | [3] | STRAP-CABLE | |
| 8. | 8T-4121 | [15] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4191 M | [15] | BOLT (M10X1.5X16-MM) | |
| 10. | 8T-4199 M | [2] | BOLT (M8X1.25X12-MM) | |
| 11. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#M00912930278
333-2920: DRIVE & MOUNTING GP-FINAL
333-2920 DRIVE & MOUNTING GP-FINAL
S/N KFA1-UP; JHF1-UP
PART OF 526-3310 OPTION AR-MACHINE
S/N KFA1-UP; JHF1-UP
PART OF 526-3310 OPTION AR-MACHINE
For full view, you need register
Parts for your 330F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 173-9683 M | [40] | BOLT (M30X3.5X90-MM) | |
| 2. | 515-0079 CY | [1] | DRIVE GP-FINAL (WITH MOTOR, SPROCKET, LH) | |
| 3. | 515-0081 CY | [1] | DRIVE GP-FINAL (WITH MOTOR, SPROCKET, RH) | |
| 4. | 8T-3282 | [40] | WASHER-HARD (22X35X3.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00912930279
338-0735: DRIVE & MOUNTING GP-FINAL
338-0735 DRIVE & MOUNTING GP-FINAL
S/N KFA1-UP; JHF1-UP
PART OF 505-9136 OPTION AR-MACHINE
S/N KFA1-UP; JHF1-UP
PART OF 505-9136 OPTION AR-MACHINE
For full view, you need register
Parts for your 330F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 515-0068 CY | [1] | DRIVE GP-FINAL (WITH MOTOR, SPROCKET, LH) | |
| 2. | 8T-3282 | [40] | WASHER-HARD (22X35X3.5-MM THK) | |
| 3. | 173-9685 M | [40] | BOLT (M20X2.5X70-MM) | |
| 4. | 515-0071 CY | [1] | DRIVE GP-FINAL (WITH MOTOR, SPROCKET, RH) | |
| (QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
