AVSPARE.COM
parts catalog

420-7242 PLUG GP-CYLINDER BLOCK S/N RDP1-UP PART OF 516-8919, 547-8683 ENGINE AR-COMPLETE FOR USE WITH OIL SUPPLY LINE FROM CYLINDER BLOCK TO REAR GEAR PTO AND TURBO WATER DRAIN LINE TO BLOCK 390F


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP
CYLINDER BLOCK GP
VALVE MECHANISM GP
CRANKSHAFT GP
MOUNTING GP-ENGINE
LUBRICATION SYSTEM
FILLER GP-ENGINE OIL


BASIC ENGINE

CYLINDER BLOCK GP
 

#M00917940110
 

420-7242: PLUG GP-CYLINDER BLOCK

420-7242 PLUG GP-CYLINDER BLOCK
S/N RDP1-UP
PART OF 516-8919, 547-8683 ENGINE AR-COMPLETE
FOR USE WITH OIL SUPPLY LINE FROM CYLINDER BLOCK TO REAR GEAR PTO AND TURBO WATER DRAIN LINE TO BLOCK
i06687077 M0091794
  For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 396-0393 [1] PLUG AS  
  214-7566 [1] SEAL-O-RING  
  360-3677 [1] PLUG (7/16-20-THD)  
2. 396-0405 [2] PLUG AS  
    (EACH INCLUDES)
  6V-6609 [1] SEAL-O-RING  
  360-3680 [1] PLUG  
3. 398-5596 [6] PLUG AS  
    (EACH INCLUDES)
  238-5080 [1] SEAL-O-RING  
  360-3680 [1] PLUG  
 

#M00917940111
 

331-6901: PLUG GP-CYLINDER HEAD

331-6901 PLUG GP-CYLINDER HEAD
S/N RDP1-UP
PART OF 516-8919, 547-8683 ENGINE AR-COMPLETE
i05426824 M0091794
  For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 353-5125 [1] PLUG AS  
  6V-3251 [1] SEAL-O-RING  
  9S-8006 [1] PLUG (7/8-14-THD)  
2. 183-3407 [4] PLUG AS  
    (EACH INCLUDES)
  9S-8004 [1] PLUG (9/16-18-THD)  
  214-7568 [1] SEAL-O-RING  
3. 307-2673 [1] PLUG AS  
  9S-8005 [1] PLUG (3/4-16-THD)  
  238-5080 [1] SEAL-O-RING  
4. 353-5126 [2] PLUG AS  
    (EACH INCLUDES)
  6V-6609 [1] SEAL-O-RING  
  9S-8005 [1] PLUG (3/4-16-THD)  
 

#M00917940112
 

279-9540: PLUG GP-ENGINE

279-9540 PLUG GP-ENGINE
S/N RDP1-UP
PART OF 516-8919, 547-8683 ENGINE AR-COMPLETE
CANNOT BE USED WITH LINES GP AIR COMPRESSOR
i06688004 M0091794
  For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 307-2673 [1] PLUG AS  
  9S-8005 [1] PLUG (3/4-16-THD)  
  238-5080 [1] SEAL-O-RING  
 

#M00917940113
 

437-3871: ROCKER ARM GP

437-3871 ROCKER ARM GP
S/N RDP1-UP
PART OF 448-2421 MECHANISM GP-FUEL PUMP & VALVE
i06889562 M0091794
  For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 307-8322 [1] SHAFT AS-ROCKER ARM  
  4B-9782 [2] BALL  
2. 437-3878 Y [2] ROCKER ARM GP  
3. 437-3873 Y [4] ROCKER ARM GP  
  Y   SEPARATE ILLUSTRATION
 

#M00917940114
 

437-3873: ROCKER ARM GP

437-3873 ROCKER ARM GP
S/N RDP1-UP
PART OF 437-3871 ROCKER ARM GP
i06889565 M0091794
  For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 258-8721 [1] BUTTON  
2. 274-4491 [1] SCREW-ARM ADJUSTMENT (3/8-24X1.20-IN)  
3. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
4. 437-3868 [1] ROCKER ARM AS  
5. 8L-2777 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#M00917940115
 

437-3878: ROCKER ARM GP

437-3878 ROCKER ARM GP
S/N RDP1-UP
PART OF 437-3871 ROCKER ARM GP
i06889563 M0091794
  For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 196-5070 [1] NUT-JAM (9/16-18-THD)  
2. 258-8721 [1] BUTTON  
3. 274-4492 [1] SCREW-ARM ADJUSTMENT  
4. 437-3879 [1] ROCKER ARM AS  
5. 8L-2777 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#M00917940116
 

319-7401: SEAL GP-CRANKSHAFT

319-7401 SEAL GP-CRANKSHAFT
S/N RDP1-UP
PART OF 366-6114 CRANKSHAFT GP
i03024205 M0091794
  For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-5867 [1] SEAL-CRANKSHAFT (FRONT)  
 

#M00917940117
 

369-3512: SUPPORT GP-ENGINE

369-3512 SUPPORT GP-ENGINE
S/N RDP1-UP
PART OF 516-8919, 547-8683 ENGINE AR-COMPLETE
i05429066 M0091794
  For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 385-6158 [1] SUPPORT-ENGINE  
2. 257-2122 [8] BOLT (1/2-13X5.75-IN)  
3. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
 

#M00917940118
 

417-5578: SUPPORT GP-ENGINE

417-5578 SUPPORT GP-ENGINE
S/N RDP1-UP
PART OF 516-8919, 547-8683 ENGINE AR-COMPLETE
i05429065 M0091794
  For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 426-2729 [1] BRACKET AS-SUPPORT  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
2. 2A-4639 [2] BOLT (3/8-16X1.625-IN)  
3. 9X-6458 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
  M   METRIC PART
 

#M00917940119
 

338-1575: COVER GP-OIL FILLER

338-1575 COVER GP-OIL FILLER
S/N RDP1-UP
PART OF 516-8919, 547-8683 ENGINE AR-COMPLETE
i05426450 M0091794
  For full view, you need register

Parts for your 390F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-3172 [1] STUD-MOUNTING (3/8-16X1.564-IN)  
2. 4N-0794 [1] COVER  
3. 6V-8676 [1] SEAL-O-RING  
4. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
6. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

Information:

Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 516-9693 CYLINDER LINERS ON CERTAIN 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 516-9693 CYLINDER LINERS ON CERTAIN 390F EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Cylinder Liner
C13, C15, and C18 Tier 4 Final Engines
Cylinder Liner
C13, C15, and C18 Tier 4 Final Engines
Cylinder Liner
C13, C15, and C18 Tier 4 Final Engines
Cylinder Block
C13, C15, and C18 Tier 4 Final Engines
Cylinder Block
C13, C15, and C18 Tier 4 Final Engines
Cylinder Liner
C13, C15, and C18 Tier 4 Final Engines
Cylinder Liner
C13, C15, and C18 Tier 4 Final Engines
Cylinder Block
C13, C15, and C18 Tier 4 Final Engines
Cylinder Block
C13, C15, and C18 Tier 4 Final Engines
Cylinder Block
C13, C15, and C18 Tier 4 Final Engines
Cylinder Block
C13, C15, and C18 Tier 4 Final Engines
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 516-9693 CYLINDER LINERS ON CERTAIN 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 516-9693 CYLINDER LINERS ON CERTAIN 390F EXCAVATORS
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 516-9693 CYLINDER LINERS ON CERTAIN 390F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 516-9693 CYLINDER LINERS ON CERTAIN 390F EXCAVATORS
Testing and Adjusting
Cylinder Block - Inspect
C15 and C18 Tier 4 Final Engines
Excessive Bearing Wear - Inspect
C15 and C18 Tier 4 Final Engines
Main Bearings - Inspect
C15 and C18 Tier 4 Final Engines
Cylinder Liner Projection - Inspect
C15 and C18 Tier 4 Final Engines
Troubleshooting
Crankcase Pressure Is High
C13, C15, and C18 Tier 4 Final Engines
Crankcase Pressure Is Low
C13, C15, and C18 Tier 4 Final Engines
Cylinder Is Noisy
C13, C15, and C18 Tier 4 Final Engines
Disassembly and Assembly
Bearing Clearance - Check
C15 and C18 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 390F :

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.