AIR INLET AND EXHAUST SYSTEM
AFTERTREATMENT GPLINES GP-AIR
AFTERTREATMENT GP
AIR INLET AND EXHAUST SYSTEM
AFTERTREATMENT GP
#M00917940170
375-7811: FRAME GP-MOUNTING
375-7811 FRAME GP-MOUNTING
S/N HNG1-UP
EXHAUST
PART OF 469-6267 MODULE AR-CLEAN EMISSIONS
S/N HNG1-UP
EXHAUST
PART OF 469-6267 MODULE AR-CLEAN EMISSIONS
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 347-8664 | [1] | BRACKET | |
| 2. | 358-2309 | [1] | BRACKET | |
| 3. | 365-4759 | [1] | BRACKET | |
| 4. | 375-7812 | [2] | BRACKET | |
| 5. | 375-7814 | [1] | BRACKET AS | |
| 6V-3538 | [4] | DOWEL | ||
| 375-7813 | [1] | BRACKET | ||
| 6. | 276-1326 M | [18] | BOLT (M10X1.5X55-MM) | |
| 7. | 305-5385 M | [2] | BOLT (M8X1.25X50-MM) | |
| 8. | 311-8366 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 344-1191 | [4] | BOLT (M10X1.5X100-MM) | |
| 10. | 344-1199 | [22] | WASHER-HARD (11X21X2.5-MM THK) | |
| M | METRIC PART | |||
#M00917940171
433-3677: HEAD GP-COMBUSTION
433-3677 HEAD GP-COMBUSTION
S/N HNG1-UP
24-VOLT. 2-STAGE
PART OF 355-0872 COMBUSTION GP-EXHAUST
S/N HNG1-UP
24-VOLT. 2-STAGE
PART OF 355-0872 COMBUSTION GP-EXHAUST
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 342-1471 | [2] | CONNECTOR | |
| 2. | 474-2007 | [1] | ADAPTER AS | |
| 342-1472 | [1] | SEAL-O-RING | ||
| 3. | 474-2008 | [1] | ADAPTER AS | |
| [1] | SEAL-O-RING | |||
| 4. | 374-7470 | [2] | GASKET-CONNECTOR | |
| 5C-9553 FM | [1] | BOLT (M6X1X16-MM) | ||
| 8T-9405 FM | [1] | BOLT-SOCKET HEAD (M4X0.7X16-MM) | ||
| 329-6729 F | [1] | GASKET | ||
| 348-3425 F | [2] | GASKET | ||
| 291-5204 FM | [6] | LOCKNUT (M8X1.25-THD) | ||
| 317-0808 F | [2] | SEAL-O-RING | ||
| 9N-1756 F | [1] | SEAL-O-RING | ||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#M00917940172
399-6078: INJECTOR & MTG GP-DEF
399-6078 INJECTOR & MTG GP-DEF
S/N HNG1-UP
PART OF 469-6267 MODULE AR-CLEAN EMISSIONS
S/N HNG1-UP
PART OF 469-6267 MODULE AR-CLEAN EMISSIONS
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 344-1200 | [3] | WASHER-HARD (6.6X12X2-MM THK) | |
| 2. | 418-2073 | [1] | GASKET AS | |
| 3. | 485-9752 | [1] | INJECTOR AS-DEF | |
| 378-3178 | [1] | SEAL | ||
| 418-2073 A | [1] | GASKET AS | ||
| 423-3258 | [2] | CONNECTOR AS | ||
| 423-3277 | [1] | KIT-COVER | ||
| 4. | 380-8418 M | [3] | BOLT-FLANGE HEAD (M6X1X35-MM) | |
| A | NOT PART OF THIS GROUP | |||
| M | METRIC PART | |||
#M00917940173
343-5333: LIFTING GP-CEM
For full view, you need register
#M00917940174
343-0624: LINES GP-AIR
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9N-5085 | [2] | CLAMP | |
| 2. | 328-7546 | [1] | HOSE | |
| 3. | 340-7241 | [1] | TUBE-AIR | |
| 4. | 353-7174 | [1] | TUBE | |
| 5. | 343-0626 | [1] | SUPPORT | |
| 6. | 343-0627 | [1] | CLAMP | |
| 7. | 380-5845 | [1] | TUBE AS-AIR | |
| 8. | 365-5489 | [1] | FLANGE | |
| 9. | 113-5304 | [2] | SEAL-O-RING | |
| 10. | 1D-4539 | [3] | BOLT (5/16-18X2.5-IN) | |
| 11. | 272-2583 | [1] | SEAL-O-RING | |
| 12. | 2B-2694 | [1] | BOLT (5/16-18X2-IN) | |
| 13. | 314-7599 | [2] | CLAMP-BAND | |
| 14. | 3E-4352 | [2] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 15. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 16. | 369-6688 | [1] | RETAINER |
#M00917940175
361-3928: LINES GP-AIR
361-3928 LINES GP-AIR -ARD COMBUSTION
S/N HNG1-UP
CAT REGEN SYS
PART OF 469-6267 MODULE AR-CLEAN EMISSIONS
S/N HNG1-UP
CAT REGEN SYS
PART OF 469-6267 MODULE AR-CLEAN EMISSIONS
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-6703 | [2] | CLAMP-HOSE | |
| 2. | 329-6729 | [1] | GASKET | |
| 3. | 361-3930 | [1] | TUBE AS | |
| 4. | 343-3840 | [1] | HOSE-AIR | |
| 5. | 344-1204 | [1] | BOLT (M8X1.25X65-MM) | |
| 6. | 305-5385 M | [1] | BOLT (M8X1.25X50-MM) | |
| 7. | 311-8366 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 344-1194 M | [1] | BOLT (M8X1.25X80-MM) | |
| M | METRIC PART | |||
#M00917940176
368-7714: LINES GP-AIR
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS#M00917940177
368-8290: LINES GP-AIR
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1W-4724 | [1] | CLAMP-HOSE | |
| 2. | 4W-9160 | [1] | CLAMP-V BAND | |
| 3. | 6V-3582 | [1] | CLAMP-HOSE | |
| 4. | 131-8829 | [1] | VALVE-DUST (AIR CLEANER) | |
| 5. | 138-0167 | [1] | GROMMET | |
| 6. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN)(AIR INLET) | |
| 7. | 320-3063 | [1] | SENSOR GP-PRESSURE (AIR INLET) | |
| 8. | 368-8334 | [1] | HOSE-AIR | |
| 9. | 368-8335 | [1] | HOSE-AIR | |
| 10. | 368-8341 | [1] | PLATE | |
| 11. | 385-1285 | [1] | HOSE | |
| 12. | 396-3277 | [1] | ELBOW AS | |
| 388-5464 | [1] | ELBOW-AIR | ||
| 2P-1692 | [1] | SEAL-O-RING | ||
| 13. | 454-9795 | [1] | PIPE AS | |
| 14. | 454-9800 | [1] | PIPE | |
| 15. | 135-8575 | [5] | BOLT AS | |
| 16. | 3K-0360 | [1] | SEAL-O-RING | |
| 17. | 6V-9028 | [1] | SEAL-O-RING | |
| 18. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 20. | 8T-4988 | [3] | CLAMP-HOSE | |
| 21. | 8T-4990 | [1] | CLAMP-HOSE | |
| M | METRIC PART | |||
#M00917940178
368-8293: LINES GP-DIESEL EXHAUST FLUID
368-8293 LINES GP-DIESEL EXHAUST FLUID
S/N HNG1-UP
PART OF 368-8292 INSTALLATION AR-ENG & CEM MOD
S/N HNG1-UP
PART OF 368-8292 INSTALLATION AR-ENG & CEM MOD
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8D-0482 | [5] | GROMMET | |
| 2. | 141-6526 | [1] | GROMMET | |
| 3. | 145-0603 | [2] | GROMMET | |
| 4. | 302-3178 | [1] | GROMMET | |
| 5. | 360-3666 | [1] | CONNECTOR AS | |
| 5P-1046 | [1] | CONNECTOR | ||
| 6V-3250 | [1] | SEAL-O-RING | ||
| 6. | 366-4680 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 6V-9001 | [1] | ELBOW | ||
| 6D-7128 | [1] | SEAL-O-RING | ||
| 6V-3250 | [1] | SEAL-O-RING | ||
| 7. | 417-9582 | [1] | HOSE AS | |
| 8. | 441-8475 | [1] | HOSE | |
| 9. | 444-2832 | [1] | BRACKET AS | |
| 10. | 450-0676 | [1] | HOSE AS | |
| 11. | 8M-2773 | [2] | CLIP (LOOP) | |
| 12. | 2D-1290 | [1] | GROMMET | |
| 13. | 204-2281 | [11] | STRAP-CABLE | |
| 14. | 204-8000 | [11] | MOUNTING-CABLE TIE | |
| 15. | 4D-7733 | [14] | CLIP (LOOP) | |
| 16. | 6D-4246 | [1] | CLIP (LOOP) | |
| 17. | 6P-0699 | [1] | GROMMET | |
| 18. | 6S-8620 | [2] | CLAMP-HOSE | |
| 19. | 7K-1181 | [1] | STRAP-CABLE | |
| 20. | 8T-4121 | [27] | WASHER-HARD (11X21X2.5-MM THK) | |
| 21. | 8T-4136 M | [12] | BOLT (M10X1.5X25-MM) | |
| 22. | 8T-4137 M | [12] | BOLT (M10X1.5X20-MM) | |
| 23. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 24. | 398-5756 E | INSULATION-BULK (330-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#M00917940179
499-6649: LINES GP-DIESEL EXHAUST FLUID
499-6649 LINES GP-DIESEL EXHAUST FLUID
S/N HNG1-UP
PART OF 504-3151 MODULE AR-DIESEL EXHAUST FLUID
S/N HNG1-UP
PART OF 504-3151 MODULE AR-DIESEL EXHAUST FLUID
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 206-6876 | [1] | CAP-TUBE | |
| 2. | 365-0162 | [1] | CONNECTOR-SPECIAL | |
| 3. | 398-9445 | [1] | PLATE AS | |
| 4. | 398-9448 | [1] | MANIFOLD | |
| 5. | 398-9449 | [1] | CAP | |
| 6. | 428-8808 | [1] | CLAMP-HOSE | |
| 7. | 499-6598 | [1] | HOSE | |
| 8. | 499-6599 | [1] | HOSE | |
| 9. | 506-5802 | [1] | HOSE AS | |
| 10. | 105-3487 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 11. | 113-8694 M | [5] | BOLT (M6X1X20-MM) | |
| 12. | 124-6257 | [3] | CLAMP-HOSE | |
| 13. | 162-0177 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 14. | 173-3993 | [1] | PLUG AS | |
| 9S-8001 | [1] | PLUG | ||
| 4J-7533 | [1] | SEAL-O-RING | ||
| 15. | 198-4775 | [1] | WASHER-HARD (6.6X15X6-MM THK) | |
| 16. | 1H-1023 | [1] | SEAL-O-RING | |
| 17. | 235-4451 M | [2] | BOLT-FLANGE HEAD (M6X1X16-MM) | |
| 18. | 260-6671 M | [1] | BOLT (M6X1X12-MM) | |
| 19. | 3J-1907 | [1] | SEAL-O-RING | |
| 20. | 7X-2503 | [4] | CLIP | |
| 21. | 506-5812 | [1] | HOSE AS | |
| M | METRIC PART | |||
Information:
AIR INLET AND EXHAUST SYSTEM
AFTERTREATMENT GP
Operation and Maintenance Manual
Special Instruction
Replacement of the Aftertreatment Regeneration Device (ARD) Combustion Head on Caterpillar Products with Clean Emissions Modules {108B, 108M}
Replacement of the Aftertreatment Regeneration Device (ARD) Combustion Head on Caterpillar Products with Clean Emissions Modules {108B, 108M}
Replacement of the Aftertreatment Regeneration Device (ARD) Combustion Head on Caterpillar Products with Clean Emissions Modules {108B, 108M}
Procedure to Repair the Pump for the Aftertreatment Regeneration Device (ARD) {1258}
Procedure to Repair the Pump for the Aftertreatment Regeneration Device (ARD) {1258}
Procedure to Repair the Pump for the Aftertreatment Regeneration Device (ARD) {1258}
Aftertreatment Filter Maintenance on Tier 4 Final Products Equipped with a Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC) and a Selective Catalyst Reduction (SCR) Filter {108F}
Aftertreatment Filter Maintenance on Tier 4 Final Products Equipped with a Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC) and a Selective Catalyst Reduction (SCR) Filter {108F}
Aftertreatment Filter Maintenance on Tier 4 Final Products Equipped with a Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC) and a Selective Catalyst Reduction (SCR) Filter {108F}
Specifications
Systems Operation
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Exhaust Cooler (NRS) - Remove and Install - For Series Turbocharger Applications
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Solenoid Valve (DEF Heater Coolant) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
390F Excavator C18 Engine Supplement
390F Excavator C18 Engine Supplement
