ELECTRICAL AND STARTING SYSTEM
SENSOR GPELECTRICAL AND STARTING SYSTEM
SENSOR GP
#M00917940350
451-1823: SENSOR & MTG GP-POSITION
451-1823 SENSOR & MTG GP-POSITION -BOOM, BM LWR CONT, GRADE CONT
S/N HNG1-UP
PART OF 500-3307 INSTALLATION AR-MACHINE
S/N HNG1-UP
PART OF 500-3307 INSTALLATION AR-MACHINE
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 309-5695 | [1] | ROD AS | |
| 3. | 345-1948 Y | [1] | SENSOR GP-POSITION (ROTARY)(BOOM) | |
| 4. | 349-5542 | [1] | HOLDER | |
| 5. | 415-7070 | [1] | BRACKET | |
| 6. | 451-1816 | [1] | LEVER | |
| 7. | 451-1817 | [1] | PLATE AS | |
| 8. | 451-1819 | [1] | GUARD AS | |
| 9. | 456-5185 | [1] | BRACKET | |
| 10. | 105-3487 M | [1] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 11. | 131-3983 M | [4] | BOLT-SOCKET HEAD (M8X1.25X35-MM) | |
| 12. | 135-8572 | [2] | BOLT AS | |
| 13. | 144-8073 | [1] | LOCKWASHER | |
| 14. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 15. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 17. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 18. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 19. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 8T-6868 M | [2] | BOLT (M12X1.75X80-MM) | |
| 21. | 9X-2040 M | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 22. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00917940351
501-8383: SENSOR & MTG GP-POSITION
501-8383 SENSOR & MTG GP-POSITION -BODY TILT
S/N HNG1-UP
PART OF 500-3305, 500-3307 INSTALLATION AR-MACHINE
S/N HNG1-UP
PART OF 500-3305, 500-3307 INSTALLATION AR-MACHINE
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 116-0118 | [1] | CLIP | |
| 2. | 312-0755 | [1] | SENSOR AS-ANGLE (BODY TILT) | |
| 493-6777 | [1] | SOFTWARE GP-MONITOR (ANGLE SENSOR) | ||
| 3. | 333-8538 | [1] | SENSOR AS-INERTIAL (ACCELERATION, ANGLE) | |
| 386-0444 | [1] | HARNESS AS-SENSOR (ACCELEROMETER) | ||
| 112-4550 E | SLEEVE (20-CM) | |||
| 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 501-8384 | [1] | BRACKET AS-SENSOR | |
| 5. | 7X-0590 | [2] | WASHER-HARD (13.5X44.5X6-MM THK) | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 8. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 9. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 10. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 11. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 13. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#M00917940352
503-9104: SENSOR & MTG GP-POSITION
503-9104 SENSOR & MTG GP-POSITION -STICK
S/N HNG1-UP
GRADE CONTROL
PART OF 504-6348 BOOM AR-MASS
S/N HNG1-UP
GRADE CONTROL
PART OF 504-6348 BOOM AR-MASS
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 309-5695 | [1] | ROD AS | |
| 8T-4133 M | [1] | NUT (M10X1.5-THD) | ||
| 9X-2065 M | [1] | NUT (M10X1.5-THD, LH) | ||
| 2. | 345-1948 Y | [1] | SENSOR GP-POSITION (ROTARY) | |
| 3. | 349-5542 | [1] | HOLDER | |
| 4. | 398-4255 | [1] | SPACER | |
| 5. | 415-7074 | [1] | PLATE AS | |
| 6. | 504-1054 | [1] | LEVER AS | |
| 7. | 105-3487 M | [1] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 8. | 131-3983 M | [4] | BOLT-SOCKET HEAD (M8X1.25X35-MM) | |
| 9. | 144-8073 | [1] | LOCKWASHER | |
| 10. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 11. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 9X-2039 M | [2] | SCREW-TRUSS HEAD (M10X1.5X35-MM) | |
| 14. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00917940353
415-8038: SENSOR & MTG GP-PRESSURE
415-8038 SENSOR & MTG GP-PRESSURE
S/N HNG1-UP
PART OF 469-6267 MODULE AR-CLEAN EMISSIONS
S/N HNG1-UP
PART OF 469-6267 MODULE AR-CLEAN EMISSIONS
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0472 | [2] | ADAPTER | |
| 2. | 127-1991 | [3] | SPACER (8.2X13X15-MM THK) | |
| 3. | 385-5773 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 5P-1046 | [1] | CONNECTOR | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 4. | 415-2415 | [2] | HOSE-AIR | |
| 5. | 415-8039 | [1] | TUBE AS | |
| 6. | 415-8040 | [1] | TUBE AS | |
| 7. | 415-8044 Y | [1] | SENSOR GP-PRESSURE (DPF DIFFERENTIAL) | |
| 8. | 415-8049 | [1] | BRACKET | |
| 9. | 124-6275 | [4] | CLAMP-HOSE | |
| 10. | 204-0813 | [3] | BOLT (M6X1X40-MM) | |
| 11. | 344-1200 | [5] | WASHER-HARD (6.6X12X2-MM THK) | |
| 12. | 344-1206 M | [2] | BOLT (M6X1X16-MM) | |
| 13. | 7W-3556 | [2] | WASHER (14.27X20.57X1.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00917940354
368-8294: SENSOR & MTG GP-SOOT
368-8294 SENSOR & MTG GP-SOOT
S/N HNG1-UP
PART OF 368-8292 INSTALLATION AR-ENG & CEM MOD
S/N HNG1-UP
PART OF 368-8292 INSTALLATION AR-ENG & CEM MOD
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [2] | STRAP-CABLE | |
| 2. | 326-4516 | [16] | TIE-CABLE | |
| 3. | 441-5127 | [1] | SENSOR AS-NITROGEN OXIDE (ENGINE OUTPUT) | |
| 4. | 441-5128 | [1] | SENSOR AS-NITROGEN OXIDE (EXHAUST PIPE OUT) | |
| 5. | 396-6211 | [2] | GROMMET | |
| 6. | 417-0324 | [1] | PLATE AS | |
| 7. | 101-3625 | [2] | CLIP (LADDER) | |
| 8. | 285-6393 | [6] | CLIP | |
| 9. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4136 M | [5] | BOLT (M10X1.5X25-MM) | |
| 11. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 12. | 8T-4970 M | [4] | BOLT (M6X1X14-MM) | |
| 13. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#M00917940355
415-5234: SENSOR GP-ENGINE
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 3. | 234-5012 Y | [1] | SENSOR GP-TEMPERATURE (COOLANT) | |
| 4. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (OUTLET AIR) | |
| 5. | 293-5535 Y | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
| 6. | 300-9805 Y | [1] | SENSOR GP-SPEED | |
| 7. | 300-9806 Y | [1] | SENSOR GP-SPEED (CAMSHAFT) | |
| 8. | 331-1134 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
| 9. | 331-1135 Y | [1] | SENSOR GP-PRESSURE (INTAKE AIR MANIFOLD) | |
| 10. | 332-0296 Y | [1] | SENSOR GP-PRESSURE (INTAKE AIR MANIFOLD)(NRS INLET) | |
| 11. | 339-8822 | [1] | SENSOR AS-TEMPERATURE (NOX REDUCTION SYSTEM) | |
| 281-8802 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 12. | 344-5734 Y | [1] | HARNESS AS-SENSOR | |
| 13. | 347-7104 | [1] | BRACKET AS | |
| 14. | 366-8024 | [1] | BRACKET | |
| 15. | 371-7163 | [1] | CONNECTOR AS | |
| 214-7568 | [1] | SEAL-O-RING | ||
| 371-7162 | [1] | ADAPTER-ELBOW | ||
| 16. | 385-1173 Y | [1] | SENSOR GP-PRESSURE (NRS DIFFERENTIAL) | |
| 17. | 0S-1617 | [1] | BOLT (5/16-18X0.75-IN) | |
| 18. | 2H-3755 | [2] | BOLT (5/16-18X0.43-IN) | |
| 19. | 353-5112 | [1] | ADAPTER AS | |
| 9X-0262 | [1] | ADAPTER | ||
| 214-7566 | [2] | SEAL-O-RING | ||
| 20. | 3B-1915 | [2] | BOLT (3/8-16X1.375-IN) | |
| 21. | 4P-7581 | [1] | CLIP (LADDER) | |
| 23. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 24. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 25. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 26. | 421-8565 | [1] | BRACKET | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00917940356
446-7002: SENSOR GP-LIQUID LEVEL
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS#M00917940357
345-1948: SENSOR GP-POSITION
345-1948 SENSOR GP-POSITION
S/N HNG1-UP
PART OF 349-2291, 451-1814, 451-1823, 503-9104 SENSOR & MTG GP-POSITION
S/N HNG1-UP
PART OF 349-2291, 451-1814, 451-1823, 503-9104 SENSOR & MTG GP-POSITION
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS#M00917940358
293-5535: SENSOR GP-PRESSURE
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 274-6719 | [1] | SENSOR GP-PRESSURE | |
| 2. | 298-7202 | [1] | HARNESS AS-SENSOR | |
| 9X-1386 E | SLEEVE (23-CM) | |||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 237-0227 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 237-0228 | [1] | RECEPTACLE AS-CONNECTOR | ||
| E | ORDER BY THE CENTIMETER | |||
#M00917940359
325-7472: SENSOR GP-PRESSURE
For full view, you need register
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 320-3061 | [1] | SENSOR GP-PRESSURE | |
| 2. | 327-5221 | [1] | HARNESS AS-SENSOR | |
| 9X-1813 E | SLEEVE (23-CM) | |||
| 180-9339 | [3] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 180-9340 | [3] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 281-8804 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 3. | 108-1304 E | TUBE-HEAT SHRINK (33-MM DIA)(4-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Special Instruction
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Troubleshooting Guide for the Rotary Position Sensor for Cat<SUP>®</SUP> Grade Control on Certain Series E and Series F Excavators {5736}
Troubleshooting Guide for the Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736}
Troubleshooting Guide for the Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736}
Specifications
Systems Operation
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Troubleshooting
Sensor Signal (Analog, Passive) - Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Disassembly and Assembly
Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Outlet Pressure
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Temperature Sensor (Catalyst Inlet) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Pressure Sensor (ARD Combustion Air) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Inlet Air Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Inlet Manifold Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
390F Excavator C18 Engine Supplement
390F Excavator C18 Engine Supplement
Pressure Sensor (NRS Absolute) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Pressure Sensor (NRS Differential) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Position Sensor - Remove and Install - 374F and 390F Stick and Boom Rotary Position Sensor Remove and Install
390F Excavator Machine Systems
390F Excavator Machine Systems
