ELECTRICAL AND STARTING SYSTEM
SENSOR GPSTARTING AID GP
STARTING MOTOR GP
SWITCH GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP#M00917940370
451-4457: SENSOR GP-PRESSURE
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS#M00917940371
300-9805: SENSOR GP-SPEED
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS#M00917940372
300-9806: SENSOR GP-SPEED
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS#M00917940373
234-5012: SENSOR GP-TEMPERATURE
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS#M00917940374
234-5013: SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
PART OF 379-8412 BASE GP-FUEL FILTER, 415-5234 SENSOR GP-ENGINE
PART OF 379-8412 BASE GP-FUEL FILTER, 415-5234 SENSOR GP-ENGINE
Parts for your 390F EXCAVATOR:
CATERPILLAR SIS#M00917940375
368-8296: STARTING AID GP-ETHER
368-8296 STARTING AID GP-ETHER
S/N HNG1-UP
PART OF 439-1603, 439-1604 OPTION AR-COLD WEATHER
S/N HNG1-UP
PART OF 439-1603, 439-1604 OPTION AR-COLD WEATHER
Parts for your 390F EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 276-8503 | [1] | FITTING AS | |
236-4545 | [1] | NUT-SLEEVE (5/16-24-THD) | ||
2. | 239-1134 Y | [1] | VALVE GP-ETHER STARTING (24-VOLT) | |
3. | 256-6881 | [1] | ATOMIZER GP-ETHER | |
236-4545 | [1] | NUT-SLEEVE (5/16-24-THD) | ||
4. | 339-6891 | [2] | STRAP-CABLE | |
5. | 339-7043 | [1] | SUPPORT | |
6. | 394-7556 | [1] | PLATE AS | |
7. | 135-8575 | [4] | BOLT AS | |
8. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
9. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
10. | 174-9169 E | TUBE (120-CM) | ||
7N-0296 A | [1] | CYLINDER AS-ETHER | ||
(MUST BE PROCURED LOCALLY FROM YOUR CAT DEALER) | ||||
A | NOT PART OF THIS GROUP | |||
E | ORDER BY THE CENTIMETER | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#M00917940376
382-9014: STARTING MOTOR GP-ELECTRIC
382-9014 STARTING MOTOR GP-ELECTRIC
S/N RDP1-UP
24-VOLT, 50 MT, LH
PART OF 516-8919, 547-8683 ENGINE AR-COMPLETE
CANNOT BE USED WITH RH STARTER APPLICATIONS
S/N RDP1-UP
24-VOLT, 50 MT, LH
PART OF 516-8919, 547-8683 ENGINE AR-COMPLETE
CANNOT BE USED WITH RH STARTER APPLICATIONS
Parts for your 390F EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9Y-6089 | [1] | GASKET | |
2. | 249-2943 | [1] | STUD (3/8-16-THD) | |
3. | 478-9867 CY | [1] | STARTING MOTOR GP-ELECTRIC | |
4. | 355-1642 Y | [1] | HARNESS AS-SWITCH | |
5. | 382-9015 | [1] | CABLE AS | |
6. | 8S-2332 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
7. | 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | |
C | CHANGE FROM PREVIOUS TYPE | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#M00917940377
478-9867: STARTING MOTOR GP-ELECTRIC
478-9867 STARTING MOTOR GP-ELECTRIC -24-VOLT
S/N RDP1-UP
PART OF 382-9014 STARTING MOTOR GP-ELECTRIC
S/N RDP1-UP
PART OF 382-9014 STARTING MOTOR GP-ELECTRIC
Parts for your 390F EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7M-0326 | [1] | CONNECTOR | |
2. | 9H-3757 | [2] | WASHER (0.516X1X0.094-IN THK) | |
3. | 1S-7446 | [3] | SCREW-MACHINE (8-32X0.437-IN) | |
4. | 8C-9660 | [3] | WASHER (4.6X7.9X0.8-MM THK) | |
5. | 9S-2544 | [9] | SCREW-HEX HEAD (8-32X11.13-MM) | |
6. | 7M-0327 | [1] | WASHER-THRUST (17.4X25.4X1.6-MM THK) | |
7. | 3T-3418 | [1] | FRAME AS-END | |
3T-3423 | [1] | CUP | ||
3T-3424 | [1] | PLUG-FELT | ||
7A. | 9G-4101 | [1] | BUSHING-END | |
8. | 3T-9525 Y | [1] | PLATE AS-BRUSH (STARTING MOTOR) | |
9. | 1T-0808 | [2] | WASHER (0.516X0.812X0.09-IN THK) | |
10. | 3T-3422 | [1] | WIRE AS | |
11. | 533-1539 | KIT-SEAL | ||
(KIT INCLUDES GASKET, BOOT, O-RINGS, SEAL, & CABLE TIE) | ||||
12. | 7X-3373 | [1] | BOLT (5/16-18X0.88-IN) | |
13. | 5J-5314 | [5] | BOLT (5/16-18X1.5-IN) | |
14. | 3L-3380 | [1] | BUSHING-TERMINAL | |
16. | 4M-1853 | [1] | LEVER AS-SHIFT | |
17. | 5M-3034 | [1] | LOCKNUT (5/16-24-THD) | |
19. | 4M-1831 | [4] | PLUG-LEVER HOUSING | |
20. | 4M-1854 | [1] | SHAFT-LEVER | |
23. | 494-6475 | [1] | HOUSING AS-DRIVE | |
24. | 6N-3826 | [1] | DRIVE AS-MOTOR | |
25. | 2H-3429 | [1] | RING-RETAINING | |
26. | 6V-1322 | [4] | BOLT (1/4-20X0.375-IN) | |
27. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
28. | 6N-3279 | [1] | INSULATOR | |
29. | 0S-1597 | [13] | BOLT (1/4-28X1-IN) | |
30. | 1M-9971 | [1] | SPACER (0.835X1.72X0.188-IN THK) | |
31. | 1H-2629 | [3] | STRIP-INSULATION | |
32. | 7M-0324 | [1] | COIL AS-FIELD | |
33. | 3R-8797 | [12] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
34. | 7F-3488 | [6] | SHOE-POLE | |
35. | 7M-8651 | [1] | ARMATURE AS | |
36. | 7M-0325 | [1] | INSULATOR | |
37. | 3T-9524 | [6] | BRUSH AS | |
38. | 3N-3763 | [1] | KIT-TERMINAL (STARTING MOTOR) | |
(INCLUDES BUSHINGS & WASHERS) | ||||
39. | 3R-8801 | [1] | CLAMP | |
40. | 8F-1434 | [2] | LOCKWASHER | |
41. | 6V-8188 | [6] | NUT (1/2-13-THD) | |
42. | 7X-0562 | [6] | WASHER-HARD (13.5X19X0.8-MM THK) | |
43. | 4B-2049 | [6] | NUT (10-32-THD) | |
44. | 8T-0328 | [10] | WASHER-HARD (5.5X10X1-MM THK) | |
45. | 3T-9494 | [6] | SPRING | |
46. | 349-6255 | [1] | HOUSING AS | |
47. | 511-7982 | [1] | SOLENOID AS (STARTER)(24-VOLT) | |
3R-8801 | [1] | CLAMP | ||
48. | 3T-3424 | [3] | PLUG-FELT | |
49. | 3T-3423 | [3] | CUP | |
50. | 1M-9968 | [1] | BUSHING | |
51. | 352-7993 | [1] | KIT-SWITCH | |
(INCLUDES SWITCH AS, COVER, BOLTS, ANCHOR & CLAMP) | ||||
52. | 4L-2729 | [1] | WASHER (0.844X1.9X0.188-IN THK) | |
53. | 4M-1896 | [1] | BUSHING-TERMINAL | |
54. | 045-4065 | [4] | SCREW-MACHINE (10-32X0.75-IN) | |
55. | 125-6535 | [1] | COVER-STARTING MOTOR | |
Y | SEPARATE ILLUSTRATION |
#M00917940378
7N-0718: SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT -BATTERY
S/N HNG1-UP
PART OF 377-8158 BATTERY & WIRING GP
S/N HNG1-UP
PART OF 377-8158 BATTERY & WIRING GP
#M00917940379
383-5711: SWITCH GP-POSITION
383-5711 SWITCH GP-POSITION -HYDRAULIC LOCKOUT
S/N HNG1-UP
PART OF 316-8822 CONSOLE GP-OPERATOR
S/N HNG1-UP
PART OF 316-8822 CONSOLE GP-OPERATOR
Parts for your 390F EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3S-2093 | [2] | STRAP-CABLE | |
2. | 4I-3038 | [2] | WASHER (3.3X8X0.5-MM THK) | |
3. | 111-4799 | [1] | SWITCH AS-LIMIT (HYDRAULIC LOCKOUT) | |
102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
5P-5998 D | TUBE (0.3-M) | |||
4. | 5C-8312 M | [2] | NUT (M4X0.7-THD) | |
5. | 120-9027 M | [2] | SCREW-PAN HEAD (M3X0.5X16-MM) | |
D | ORDER BY THE METER | |||
M | METRIC PART |
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Special Instruction
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Troubleshooting Guide for the Rotary Position Sensor for Cat<SUP>®</SUP> Grade Control on Certain Series E and Series F Excavators {5736}
Troubleshooting Guide for the Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736}
Troubleshooting Guide for the Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736}
Specifications
Systems Operation
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Troubleshooting
Sensor Signal (Analog, Passive) - Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Disassembly and Assembly
Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Outlet Pressure
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Temperature Sensor (Catalyst Inlet) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Pressure Sensor (ARD Combustion Air) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Inlet Air Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Inlet Manifold Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
390F Excavator C18 Engine Supplement
390F Excavator C18 Engine Supplement
Pressure Sensor (NRS Absolute) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Pressure Sensor (NRS Differential) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Position Sensor - Remove and Install - 374F and 390F Stick and Boom Rotary Position Sensor Remove and Install
390F Excavator Machine Systems
390F Excavator Machine Systems