OPERATOR STATION
CAB GPELECTRICAL AND STARTING SYSTEM
LIGHTING GPELECTRONICS GP-MACHINE
OPERATOR STATION
PEDAL GPHATCH GP
SEAT GP
WINDOW GP
OPERATOR STATION
CAB GP
#M00927690490
484-8021: INSTL AR-BUMPER & WASHER LINES
484-8021 INSTL AR-BUMPER & WASHER LINES
S/N ZBT1-UP
CAB WITHOUT LOWER WIPER
PART OF 532-9504 DISTRIBUTION AR
S/N ZBT1-UP
CAB WITHOUT LOWER WIPER
PART OF 532-9504 DISTRIBUTION AR
For full view, you need register
#M00927690491
528-3283: KIT-LIGHTING COVER
For full view, you need register
Parts for your 320 GC EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5C-9553 M | [4] | BOLT (M6X1X16-MM) | ||
| 6V-7357 M | [7] | BOLT (M6X1X25-MM) | ||
| 101-7401 M | [4] | BOLT-SOCKET HEAD (M10X1.5X20-MM) | ||
| 526-8648 | [1] | BRACKET | ||
| 484-1454 | [2] | CLIP-RETAINING | ||
| 532-7317 | [1] | COVER AS | ||
| 532-7318 | [1] | COVER AS | ||
| 539-2832 | [2] | HARNESS AS-CAB (FLOODLIGHTS) | ||
| 4I-5049 M | [7] | NUT-SPACER (M6X1-THD) | ||
| 348-5410 | [10] | SEAL | ||
| 526-8639 | [1] | VISOR | ||
| 8T-4121 | [15] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
#M00927690492
528-3285: KIT-MACHINE SECURITY SYSTEM
For full view, you need register
Parts for your 320 GC EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8C-8451 M | [2] | BOLT (M6X1X40-MM) | ||
| 527-9502 | [1] | BRACKET | ||
| 526-8586 | [1] | COVER | ||
| 504-4980 | [1] | ELECTRONICS GP-MACHINE | ||
| 8C-5607 | [4] | MOUNT-ISOLATION | ||
| 5C-2890 M | [2] | NUT (M6X1-THD) | ||
| 9X-2042 M | [2] | SCREW-TRUSS HEAD (M6X1X12-MM) | ||
| 8C-5608 | [2] | SPACER (6.5X9.5X25.4-MM THK) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 427-9771 | [1] | TIE | ||
| 9X-6165 | [2] | WASHER (6.5X22X2.5-MM THK) | ||
| 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | ||
| M | METRIC PART | |||
#M00927690493
528-3280: KIT-PEDAL
For full view, you need register
Parts for your 320 GC EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | ||
| 101-7401 M | [4] | BOLT-SOCKET HEAD (M10X1.5X20-MM) | ||
| 490-1013 | [1] | CONTROL GP-PEDAL | ||
| 162-0349 | [1] | COVER | ||
| 554-3789 | [1] | FILM-IDENTIFICATION (OPERATOR CONTROL PEDALS) | ||
| 233-5260 | [1] | LANYARD | ||
| 553-9982 | [1] | PEDAL AS (LH) | ||
| 135-2274 | [1] | PEDAL-RUBBER (LH) | ||
| 8T-0114 | [1] | PIN-SPRING | ||
| 095-0735 M | [2] | SCREW-MACHINE (M5X0.8X8-MM) | ||
| 510-0842 | [1] | STOPPER | ||
| 532-7421 | [1] | SUPPORT AS | ||
| 9X-2027 | [4] | WASHER (11X18X2-MM THK) | ||
| 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
#M00927690494
528-3281: KIT-PEDAL
For full view, you need register
Parts for your 320 GC EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | ||
| 101-7401 M | [4] | BOLT-SOCKET HEAD (M10X1.5X20-MM) | ||
| 490-1013 | [1] | CONTROL GP-PEDAL | ||
| 162-0349 | [1] | COVER | ||
| 554-3789 | [1] | FILM-IDENTIFICATION (OPERATOR CONTROL PEDALS) | ||
| 233-5260 | [1] | LANYARD | ||
| 498-7710 | [1] | PEDAL AS (RH) | ||
| 135-2274 | [1] | PEDAL-RUBBER | ||
| 8T-0114 | [1] | PIN-SPRING | ||
| 095-0735 M | [2] | SCREW-MACHINE (M5X0.8X8-MM) | ||
| 510-0842 | [1] | STOPPER | ||
| 498-7711 | [1] | SUPPORT AS | ||
| 9X-2027 | [4] | WASHER (11X18X2-MM THK) | ||
| 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
#M00927690495
528-3289: KIT-ROOF HATCH
528-3289 KIT-ROOF HATCH
S/N ZBT1-UP
S/N ZBT1-UP
For full view, you need register
#M00927690496
516-4946: KIT-SEAT SUSPENSION
516-4946 KIT-SEAT SUSPENSION -MECHANICAL
S/N ZBT1-UP
PART OF 488-6501 SEAT GP-SUSPENSION
S/N ZBT1-UP
PART OF 488-6501 SEAT GP-SUSPENSION
For full view, you need register
Parts for your 320 GC EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 516-4956 | [1] | KIT-INDICATOR | |
| (INCLUDES LEVEL INDICATOR & SCREW-CYLINDER) | ||||
| 2. | 516-4955 | [1] | KIT-LEVER | |
| (INCLUDES WASHERS, SPINDLE, NEEDLE BEARING, HOUSING,FLAT HEAD SCREWS, LEVER, LEVER RATCHET & COVER CAP) | ||||
| 3. | 516-4954 | [1] | KIT-BEARING | |
| (INCLUDES SLIDERS & BEARING) | ||||
| 4. | 516-4953 | [1] | KIT-PARTS | |
| (INCLUDES SCREWS, WASHER LOCKS, FLAT HEAD SCREWS, BUMPERS, SLIDERS, WASHERS, THRUST BEARINGS, SCREW CYLINDER, SLIDER) | ||||
| 5. | 516-4947 | [1] | BELLOWS | |
| 6. | 516-4948 | [1] | KIT-SPRING | |
| (INCLUDES BUSHING, SPRINGS, TENSION-SPRING & SCREWS) | ||||
| 7. | 516-4951 | [1] | KIT-BEARING | |
| (INCLUDES BUSHINGS, BOLT, WASHER & SCREW) | ||||
| 8. | 516-4952 | [1] | KIT-ABSORBER | |
| (INCLUDES SPRING, BOLT, BUSHING, SHOCK ABSORBER, CLAMP RING, | ||||
#M00927690497
528-3282: KIT-WINDOW
For full view, you need register
#M00927690498
528-3279: KIT-WINDOW WIPER
For full view, you need register
Parts for your 320 GC EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 526-8602 | [1] | ARM AS | ||
| 526-8603 | [1] | BLADE AS | ||
| 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | ||
| 8T-4189 M | [3] | BOLT (M8X1.25X20-MM) | ||
| 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | ||
| 4I-1163 | [1] | BRACKET | ||
| 526-8570 | [1] | BRACKET | ||
| 526-8597 | [1] | BUMPER AS-FRONT | ||
| 5P-9297 | [1] | CLIP (LOOP) | ||
| 9X-8582 | [1] | CLIP (LOOP) | ||
| 526-8569 | [1] | COVER | ||
| 9D-3769 | [1] | GROMMET | ||
| 144-0195 | [59] | HOSE | ||
| 7Y-7365 | [1] | JOINT (3-WAY) | ||
| 526-8604 | [1] | MOTOR AS-WINDOW WIPER | ||
| 161-3128 | [1] | RELAY (24-VOLT) | ||
| 172-5291 M | [4] | SCREW (M10X1.5X30-MM) | ||
| 9X-2042 M | [2] | SCREW-TRUSS HEAD (M6X1X12-MM) | ||
| 4I-3090 | [1] | SEAL | ||
| 201-4441 | [12] | SEAL | ||
| 118-9901 | [2] | SPACER (12X20X10-MM THK) | ||
| 204-1611 | [1] | STRAP (DUAL) | ||
| 163-6795 | [1] | STRAP-CABLE | ||
| 526-8607 | [1] | SUPPORT AS | ||
| 293-1256 | [1] | VALVE AS-CHECK | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | ||
| M | METRIC PART | |||
#M00927690499
085-6444: LATCH GP-WINDOW
For full view, you need register
