AVSPARE.COM
parts catalog

538-5288 MOUNTING GP-WIRING -RETURN FILTER, HAMMER S/N GDY1-UP PART OF 538-3028 CONTROL AR-AUXILIARY 336




ELECTRICAL AND STARTING SYSTEM

WIRING GP
 

#M00935490310
 

538-5288: MOUNTING GP-WIRING

538-5288 MOUNTING GP-WIRING -RETURN FILTER, HAMMER
S/N GDY1-UP
PART OF 538-3028 CONTROL AR-AUXILIARY
i07396958 M0093549
  For full view, you need register

Parts for your 336 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 266-7379 [1] STRAP-CABLE  
3. 484-1454 [1] CLIP-RETAINING  
4. 484-1456 [1] STRAP-CABLE  
5. 204-1611 [1] STRAP (DUAL)  
 

#M00935490311
 

510-9082: PANEL GP-FUSE

510-9082 PANEL GP-FUSE
S/N GDY1-UP
PART OF 504-3553 CABLE GP-GROUND
i07384480 M0093549
  For full view, you need register

Parts for your 336 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 378-1012 [2] FUSE (100-AMPERE)  
2. 455-2302 [2] FUSE (70-AMPERE)  
3. 510-8930 [2] FUSE (40-AMPERE)  
4. 425-9809 [2] FUSE (125-AMPERE)  
5. 510-9083 [1] COVER  
6. 425-9879 [2] SEAL-COVER  
7. 5C-2874 M [8] NUT (M5X0.8-THD)  
8. 204-6101 [8] WASHER-HARD (5.3X10X1-MM THK)  
9. 096-0192 [8] LOCKWASHER  
10. 5C-7261 M [7] NUT (M8X1.25-THD)  
11. 7H-3937 [7] LOCKWASHER  
12. 8T-4224 [7] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#M00935490312
 

3T-9525: PLATE AS-BRUSH

3T-9525 PLATE AS-BRUSH
S/N NTB1-UP
PART OF 349-6554 STARTING MOTOR GP-ELECTRIC
i04250792 M0093549
  For full view, you need register

Parts for your 336 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-0372 [1] PLATE  
2. 6T-0371 [1] INSULATOR  
3. 9F-5599 [12] LOCKWASHER  
4. 6T-0363 [6] HOLDER AS-BRUSH  
    (EACH INCLUDES)
  3T-9494 [1] SPRING  
5. 3T-4709 [3] PLATE  
6. 3T-4710 [3] PLATE  
7. 2L-6679 [3] PLATE-INSULATOR  
8. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
9. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
 

#M00935490313
 

307-8698: PLUG GP-CONNECTOR

307-8698 PLUG GP-CONNECTOR -SEA WATER
S/N NTB1-UP
PART OF 525-7118 SENSOR GP-ENGINE
i07391215 M0093549
  For full view, you need register

Parts for your 336 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8737 [3] PLUG-SEAL  
2. 230-4014 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
 

#M00935490314
 

535-6785: PROTECTION GP-WIRING

535-6785 PROTECTION GP-WIRING
S/N NTB1-UP
LH PRIMARY AND SECONDARY FUEL FILTER
PART OF 522-6120 ENGINE AR-COMPLETE
i07499082 M0093549
  For full view, you need register

Parts for your 336 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 342-2976 [1] CAP-CONNECTOR (12-PIN)  
 

#M00935490315
 

541-6658: PROTECTION GP-WIRING

541-6658 PROTECTION GP-WIRING
S/N NTB1-UP
PART OF 522-6120 ENGINE AR-COMPLETE
i07499084 M0093549
  For full view, you need register

Parts for your 336 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  325-8700 [1] PLUG AS  
  8T-8737 [12] PLUG-SEAL  
  230-4009 [1] PLUG AS-CONNECTOR (12-PIN)  
  455-0709 [1] SEAL-CONNECTOR  
  541-2564 [1] PLUG AS-CONNECTOR  
  8T-8737 [12] PLUG-SEAL  
  281-8813 [1] PLUG AS-CONNECTOR (12-PIN)  
  455-0709 [1] SEAL-CONNECTOR  
 

#M00935490316
 

490-2765: RELAY GP

490-2765 RELAY GP -REFUELING PUMP
S/N GDY1-UP
PART OF 546-1255 PUMP AR-FUEL TRANSFER
i07139695 M0093549
  For full view, you need register

Parts for your 336 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 161-3128 [1] RELAY (24-VOLT)(REFUELING PUMP)  
 

#M00935490317
 

490-2767: SENSOR & MTG GP-POSITION

490-2767 SENSOR & MTG GP-POSITION -BODY TILT
S/N GDY1-UP
PART OF 516-0550 GRADE CONTROL AR
i07138576 M0093549
  For full view, you need register

Parts for your 336 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 150-5785 [2] DOWEL  
2. 563-0598 [1] SENSOR AS-POSITION (INERTIAL MEASUREMENT UNIT)  
3. 525-6177 [1] BRACKET-SENSOR  
4. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
6. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
7. 8T-7547 M [3] BOLT (M8X1.25X30-MM)  
  M   METRIC PART
 

#M00935490318
 

490-2768: SENSOR & MTG GP-POSITION

490-2768 SENSOR & MTG GP-POSITION -GRADE CONTROL, BOOM
S/N GDY1-UP
PART OF 517-5967, 525-4121 GRADE CONTROL AR
i07134738 M0093549
  For full view, you need register

Parts for your 336 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 150-5785 [2] DOWEL  
2. 563-0598 [1] SENSOR AS-POSITION (INERTIAL MEASUREMENT UNIT)  
3. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
4. 8T-7547 M [3] BOLT (M8X1.25X30-MM)  
  M   METRIC PART
 

#M00935490319
 

490-2769: SENSOR & MTG GP-POSITION

490-2769 SENSOR & MTG GP-POSITION -STICK
S/N GDY1-UP
GRADE CONTROL
PART OF 522-8790, 522-8798 GRADE CONTROL AR, 517-5971 INSTALLATION AR-MACHINE
i07138567 M0093549
  For full view, you need register

Parts for your 336 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 150-5785 [2] DOWEL  
2. 501-1450 [1] SENSOR AS-POSITION (INERTIAL MEASUREMENT UNIT)  
3. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
4. 8T-7547 M [3] BOLT (M8X1.25X30-MM)  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
SmartBoom Operation - If Equipped
336 and 336 GC Excavator
SmartBoom Control - If Equipped
336 and 336 GC Excavator
Battery Disconnect Switch
336 and 336 GC Excavator
Fuses - Replace
336 and 336 GC Excavator
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Installation of the <NOBR>504-3561</NOBR> Chassis Wiring Gp on Certain Hydraulic Excavators {1408}
Installation of the 504-3561 Chassis Wiring Gp on Certain Hydraulic Excavators {1408}
Procedure for Installing a Beacon Relay on Certain 320, 323, 330, and 336 Excavators {1408, 1431, 7301}
Procedure for Installing a Beacon Relay on Certain 320, 323, 330, and 336 Excavators {1408, 1431, 7301}
Technical Information Bulletin
AMR/IMU Harness May Fail On Certain 320, 323, 330, and 336 Excavators {1408, 5734}
AMR/IMU Harness May Fail On Certain 320, 323, 330, and 336 Excavators {1408, 5734}
Intermittent and Startup Satellite Connection Issues May Occur on Certain MS952 and MS955 Global Navigational Satellite System (GNSS) Receivers {1408, 7010, 7606, 7620}
Intermittent and Startup Satellite Connection Issues May Occur on Certain MS952 and MS955 Global Navigational Satellite System (GNSS) Receivers {1408, 7010, 7606, 7620}
Systems Operation
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines
Sensors
330, 330 GC, 336, 336 GC and 340 Excavator Tool Control
Switches
330, 330 GC, 336, 336 GC and 340 Excavator Tool Control
Testing and Adjusting
Overload Warning - Set - If Equipped
336 and 336 GC Excavator Systems
Troubleshooting
Connector Locations
336, 336 GC and 340 Excavator Systems
Wiring Harness (Open Circuit) - Test
336, 336 GC and 340 Excavator Systems
Wiring Harness (Short Circuit) - Test
336, 336 GC and 340 Excavator Systems
Electrical Connectors - Inspect
C9.3B Aftertreatment Systems
ARD Ignition - Test
C9.3B Aftertreatment Systems
ECM Location Code - Test
336, 336 GC and 340 Excavator Systems
Connector Locations
2D, 2D Advanced, and 3D GRADE System for Next Gen Hydraulic Excavators
CAN Data Link - Test
2D, 2D Advanced, and 3D GRADE System for Next Gen Hydraulic Excavators
Electrical Connector - Inspect
336, 336 GC and 340 Excavator Systems
Wiring Harness (Open Circuit) - Test
2D, 2D Advanced, and 3D GRADE System for Next Gen Hydraulic Excavators
Wiring Harness (Short Circuit) - Test
2D, 2D Advanced, and 3D GRADE System for Next Gen Hydraulic Excavators
Connector Contact Description
336, 336 GC and 340 Excavator Systems
System Schematic
336, 336 GC and 340 Excavator Systems
Electrical Connector - Inspect
2D, 2D Advanced, and 3D GRADE System for Next Gen Hydraulic Excavators
Disassembly and Assembly
Battery - Remove and Install
336 Excavators (Powered by C9.3 Engine, Tier 3) Engine Supplement
Service Magazine
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Ethernet Patch Cables are Available for Next Generation Hydraulic Excavators {1408, 7301}
Ethernet Patch Cables are Available for Next Generation Hydraulic Excavators {1408, 7301}
New EC520 Controller Monitor Software is Now Available for Cat<SUP>&reg;</SUP> Grade System {1408, 7220, 7490, 7610, 7620}
New EC520 Controller Monitor Software is Now Available for Cat® Grade System {1408, 7220, 7490, 7610, 7620}

Caterpillar Parts SIS Catalog 336 :

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.