WORK TOOLS
SCARIFIER GPHYDRAULIC SYSTEM
CYLINDER GPWORK TOOLS
BLADE GPHYDRAULIC SYSTEM
LIFT GPWORK TOOLS
RIPPER GPWORK TOOLS
SCARIFIER GP
#M00951730740
339-7733: BRACKET GP-SCARIFIER
For full view, you need register
#M00951730741
217-3501: CYLINDER GP-HYDRAULIC
217-3501 CYLINDER GP-HYDRAULIC -WORK TOOL LIFT
S/N N941-UP
PART OF 293-5556 LIFT GP-WORK TOOL
S/N N941-UP
PART OF 293-5556 LIFT GP-WORK TOOL
For full view, you need register
Parts for your 140 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2K-7468 | [1] | LOCKNUT (1-1/4-12-THD) | |
| 2. | 4T-6907 | [1] | RING-WEAR | |
| 3. | 4T-8054 | [1] | SEAL AS | |
| 4. | 7J-9885 | [1] | RING-WEAR | |
| 5. | 167-2190 | [1] | SEAL AS-BUFFER | |
| 6. | 219-7242 | [1] | TUBE AS | |
| 7. | 219-7243 | [1] | ROD AS | |
| 8. | 219-7244 | [1] | PISTON | |
| 9. | 219-7245 | [1] | HEAD | |
| 10. | 231-3539 | [1] | SEAL-WIPER | |
| 11. | 167-2300 | [1] | SEAL-U-CUP | |
| 12. | 2H-3931 | [2] | SEAL-O-RING | |
| 13. | 4J-9224 | [1] | RING-BACKUP |
#M00951730742
430-5641: LIFT GP-BLADE
For full view, you need register
#M00951730743
436-6277: LIFT GP-BLADE
For full view, you need register
Parts for your 140 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7D-8875 | [4] | WASHER-THRUST (2.515X3.62X0.075-IN THK) | |
| 2. | 7D-8878 | [4] | WASHER-THRUST (3.015X4.22X0.075-IN THK) | |
| 3. | 7D-8879 B | [8] | SHIM (0.127-MM THK) | |
| 4. | 7D-8881 B | [6] | SHIM (0.254-MM THK) | |
| 5. | 7D-8882 B | [2] | SHIM (0.508-MM THK) | |
| 6. | 8D-4336 B | [2] | WASHER-THRUST (76.6X146X1.90-MM THK) | |
| 7. | 8X-5106 | [1] | STUD-BALL | |
| 8. | 8X-5107 | [1] | PIN | |
| 9. | 381-0356 | [1] | BAR AS-LINK | |
| 9A. | 8X-5108 | [2] | BUSHING | |
| 9B. | 382-4604 | [7] | BUSHING | |
| 10. | 123-8187 B | [6] | WASHER-THRUST (76.6X146X1-MM THK) | |
| 11. | 339-1911 M | [6] | BOLT (M20X2.5X125-MM) | |
| 13. | 259-4483 | [2] | PIN | |
| 14. | 259-4492 | [2] | LOCK | |
| 15. | 296-3004 | [1] | ARM AS-LIFT (LH) | |
| 15A. | 7D-8889 | [1] | BEARING (76.35-MM ID) | |
| 15B. | 8D-8168 | [1] | BEARING (63.65-MM ID) | |
| 16. | 296-3005 | [1] | ARM AS-LIFT (RH) | |
| 16A. | 7D-8889 | [1] | BEARING (76.35-MM ID) | |
| 16B. | 8D-8168 | [1] | BEARING (63.65-MM ID) | |
| 17. | 261-8541 | [2] | YOKE AS | |
| (EACH INCLUDES) | ||||
| 2G-8233 | [1] | RING | ||
| 18. | 261-8543 | [2] | RETAINER | |
| 19. | 261-8545 | [1] | PLATE | |
| 20. | 261-8547 | [2] | LOCK | |
| 21. | 6V-3823 M | [1] | BOLT (M12X1.75X60-MM) | |
| 22. | 8T-0362 M | [4] | BOLT (M20X2.5X110-MM) | |
| 23. | 8T-3282 | [16] | WASHER-HARD (22X35X3.5-MM THK) | |
| 24. | 5P-8245 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 25. | 6V-7742 M | [6] | NUT-FULL (M20X2.5-THD) | |
| 26. | 3P-1461 | [4] | SEAL-LIP TYPE | |
| 27. | 5F-0149 | [2] | SEAL-O-RING | |
| 28. | 7D-8876 | [2] | WASHER-THRUST (65.07X92.08X2.39-MM THK) | |
| 29. | 7D-8877 | [2] | WASHER-THRUST (77.77X107.19X2.39-MM THK) | |
| 30. | 7D-8883 | [2] | SEAL | |
| 31. | 7D-8884 | [2] | SEAL | |
| 32. | 7H-2444 | [2] | SEAL-O-RING | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#M00951730744
436-6278: LIFT GP-BLADE
For full view, you need register
Parts for your 140 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7D-8875 | [4] | WASHER-THRUST (2.515X3.62X0.075-IN THK) | |
| 2. | 7D-8878 | [4] | WASHER-THRUST (3.015X4.22X0.075-IN THK) | |
| 3. | 7D-8879 B | [8] | SHIM (0.127-MM THK) | |
| 4. | 7D-8881 B | [6] | SHIM (0.254-MM THK) | |
| 5. | 7D-8882 B | [2] | SHIM (0.508-MM THK) | |
| 6. | 8D-4336 B | [2] | WASHER-THRUST (76.6X146X1.90-MM THK) | |
| 7. | 8X-5106 | [1] | STUD-BALL | |
| 8. | 8X-5107 | [1] | PIN | |
| 9. | 123-8187 B | [6] | WASHER-THRUST (76.6X146X1-MM THK) | |
| 10. | 259-4492 | [2] | LOCK | |
| 11. | 261-8541 | [2] | YOKE AS | |
| (EACH INCLUDES) | ||||
| 2G-8233 | [1] | RING | ||
| 12. | 261-8543 | [2] | RETAINER | |
| 13. | 261-8545 | [1] | PLATE | |
| 14. | 261-8547 | [2] | LOCK | |
| 15. | 296-3004 | [1] | ARM AS-LIFT (LH) | |
| 15A. | 7D-8889 | [1] | BEARING (76.35-MM ID) | |
| 15B. | 8D-8168 | [1] | BEARING (63.65-MM ID) | |
| 16. | 296-3005 | [1] | ARM AS-LIFT (RH) | |
| 16A. | 7D-8889 | [1] | BEARING (76.35-MM ID) | |
| 16B. | 8D-8168 | [1] | BEARING (63.65-MM ID) | |
| 17. | 381-0356 | [1] | BAR AS-LINK | |
| 17A. | 8X-5108 | [2] | BUSHING | |
| 17B. | 382-4604 | [7] | BUSHING | |
| 18. | 112-3926 M | [4] | BOLT (M20X2.5X110-MM) | |
| 19. | 201-8034 M | [6] | BOLT (M20X2.5X120-MM) | |
| 20. | 259-4483 | [2] | PIN | |
| 21. | 3P-1461 | [4] | SEAL-LIP TYPE | |
| 22. | 5F-0149 | [2] | SEAL-O-RING | |
| 23. | 7D-8876 | [2] | WASHER-THRUST (65.07X92.08X2.39-MM THK) | |
| 24. | 7D-8877 | [2] | WASHER-THRUST (77.77X107.19X2.39-MM THK) | |
| 25. | 7D-8883 | [2] | SEAL | |
| 26. | 7D-8884 | [2] | SEAL | |
| 27. | 7H-2444 | [2] | SEAL-O-RING | |
| 28. | 8T-4123 | [16] | WASHER (22X35X3.5-MM THK) | |
| 29. | 8T-4131 M | [6] | NUT (M20X2.5-THD) | |
| 30. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 31. | 8T-4910 M | [1] | BOLT (M12X1.75X60-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#M00951730745
293-5556: LIFT GP-WORK TOOL
293-5556 LIFT GP-WORK TOOL
S/N N941-UP
PART OF 312-2204 LIFT GP-WORK TOOL
Type 1
FOR USE WITH PLOW/BULLDOZER-LIFT VALVE AND LINES GP TO FRONT OF MOTORGRADER
S/N N941-UP
PART OF 312-2204 LIFT GP-WORK TOOL
Type 1
FOR USE WITH PLOW/BULLDOZER-LIFT VALVE AND LINES GP TO FRONT OF MOTORGRADER
For full view, you need register
Parts for your 140 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 293-5559 FY | [1] | BRACE GP (WORK TOOL LIFT) | ||
| 1. | 1F-6762 | [4] | BOLT (1-1/2-12X4.5-IN) | |
| 2. | 2K-7468 | [1] | LOCKNUT (1-1/4-12-THD) | |
| 3. | 3B-8489 | [11] | FITTING-GREASE (1/8-27 PTF) | |
| 4. | 4H-6511 | [1] | BOLT (1-1/4-12X6.5-IN) | |
| 5. | 5F-9891 | [4] | BOLT (1-1/2-12X6-IN) | |
| 6. | 9X-2521 | [8] | NUT-FULL | |
| 7. | 137-4234 | [1] | PLATE-IDENTIFICATION (WORK TOOL) | |
| 8. | 170-4910 | [1] | FRAME AS-COUPLER | |
| 9. | 172-8121 | [2] | SPACER (34.925X60.325X14.2-MM THK) | |
| 10. | 172-8122 | [2] | PIN AS | |
| 11. | 172-8125 | [3] | PIN (SNAP) | |
| 12. | 172-8126 | [1] | FILM-WARNING (CRUSH HAZARD) | |
| 13. | 172-8127 | [1] | PIN AS (LOCKING) | |
| 14. | 172-8287 I | [1] | HOSE AS | |
| 15. | 172-8288 I | [1] | HOSE AS | |
| 16. | 194-3655 | [2] | BEARING GP | |
| 17. | 195-3330 | [1] | PLATE AS-MOUNTING | |
| 18. | 217-3501 Y | [1] | CYLINDER GP-HYDRAULIC (WORK TOOL LIFT) | |
| 19. | 284-7971 | [1] | ARM AS (LOWER) | |
| 20. | 284-7972 | [1] | ARM AS (UPPER) | |
| 22. | 2M-9780 | [4] | SEAL-O-RING | |
| 23. | 3J-1907 | [4] | SEAL-O-RING | |
| 24. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 25. | 6V-8397 | [4] | SEAL-O-RING | |
| 26. | 6V-8636 | [1] | CONNECTOR | |
| 27. | 6V-8724 | [3] | ELBOW (90-DEG) | |
| 28. | 9X-8875 | [4] | BOLT (1/2-13X3.5-IN) | |
| F | NOT SHOWN | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00951730746
293-5556: LIFT GP-WORK TOOL
293-5556 LIFT GP-WORK TOOL
S/N N941-UP
PART OF 312-2204 LIFT GP-WORK TOOL
Type 2
FOR USE WITH PLOW/BULLDOZER-LIFT VALVE AND LINES GP TO FRONT OF MOTORGRADER
S/N N941-UP
PART OF 312-2204 LIFT GP-WORK TOOL
Type 2
FOR USE WITH PLOW/BULLDOZER-LIFT VALVE AND LINES GP TO FRONT OF MOTORGRADER
For full view, you need register
Parts for your 140 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1F-6762 | [4] | BOLT (1-1/2-12X4.5-IN) | |
| 2. | 2K-7468 | [1] | LOCKNUT (1-1/4-12-THD) | |
| 3. | 3B-8489 | [11] | FITTING-GREASE (1/8-27 PTF) | |
| 4. | 4H-6511 | [1] | BOLT (1-1/4-12X6.5-IN) | |
| 5. | 5F-9891 | [4] | BOLT (1-1/2-12X6-IN) | |
| 6. | 9X-2521 | [8] | NUT-FULL | |
| 7. | 137-4234 | [1] | PLATE-IDENTIFICATION (WORK TOOL) | |
| 8. | 170-4910 | [1] | FRAME AS-COUPLER | |
| 9. | 172-8121 | [2] | SPACER (34.925X60.325X14.2-MM THK) | |
| 10. | 172-8122 | [2] | PIN AS | |
| 11. | 172-8125 | [3] | PIN (SNAP) | |
| 12. | 172-8126 | [1] | FILM-WARNING (CRUSH HAZARD) | |
| 13. | 172-8127 | [1] | PIN AS (LOCKING) | |
| 14. | 172-8287 I | [1] | HOSE AS | |
| 15. | 172-8288 I | [1] | HOSE AS | |
| 16. | 194-3655 | [2] | BEARING GP | |
| 17. | 195-3330 | [1] | PLATE AS-MOUNTING | |
| 18. | 217-3501 Y | [1] | CYLINDER GP-HYDRAULIC (WORK TOOL LIFT) | |
| 19. | 284-7971 | [1] | ARM AS (LOWER) | |
| 20. | 284-7972 | [1] | ARM AS (UPPER) | |
| 22. | 2M-9780 | [4] | SEAL-O-RING | |
| 23. | 3J-1907 | [4] | SEAL-O-RING | |
| 24. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 25. | 6V-8397 | [4] | SEAL-O-RING | |
| 26. | 6V-8636 | [1] | CONNECTOR | |
| 27. | 6V-8724 | [3] | ELBOW (90-DEG) | |
| 28. | 9X-8875 | [4] | BOLT (1/2-13X3.5-IN) | |
| 293-5559 FY | [1] | BRACE GP (WORK TOOL LIFT) | ||
| F | NOT SHOWN | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00951730747
312-2204: LIFT GP-WORK TOOL
For full view, you need register
Parts for your 140 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 293-5556 Y | [1] | LIFT GP-WORK TOOL | ||
| Y | SEPARATE ILLUSTRATION | |||
#M00951730748
515-4650: MOUNTING GP-RIPPER
For full view, you need register
Parts for your 140 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8E-6130 | [2] | LINK AS | |
| (EACH INCLUDES) | ||||
| 2K-4233 | [1] | BOSS | ||
| 2. | 104-4523 | [2] | CAM AS | |
| 3. | 283-1578 | [8] | WASHER-HARD (22X45X10-MM THK) | |
| 4. | 515-4651 | [1] | PLATE AS | |
| 8P-9770 | [1] | PLATE | ||
| 104-4522 | [2] | PLATE | ||
| 5. | 106-4175 M | [8] | BOLT (M20X2.5X60-MM) | |
| 6. | 109-6776 | [2] | PIN | |
| 7. | 114-6099 M | [6] | BOLT (M24X3X80-MM) | |
| 8. | 129-3180 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 9. | 267-3507 | [6] | WASHER-HARD (26X47X12-MM THK) | |
| 10. | 3W-7254 | [2] | SPACER (47X80X20-MM THK) | |
| 11. | 3W-7255 | [2] | SPACER (47X80X10-MM THK) | |
| 12. | 6P-5647 | [2] | BOSS | |
| 13. | 7X-2543 M | [2] | BOLT (M10X1.5X120-MM) | |
| 14. | 8T-0389 M | [4] | LOCKNUT (M10X1.5-THD) | |
| 15. | 8T-5041 M | [2] | BOLT (M12X1.75X120-MM) | |
| 16. | 8T-6685 M | [2] | BOLT (M10X1.5X110-MM) | |
| 17. | 9W-7469 | [2] | PIN | |
| 18. | 9W-7470 | [2] | PIN | |
| M | METRIC PART | |||
#M00951730749
558-2404: MOUNTING GP-RIPPER
For full view, you need register
Parts for your 140 MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 283-1578 | [8] | WASHER-HARD (22X45X10-MM THK) | |
| 2. | 104-4523 | [2] | CAM AS | |
| 3. | 106-4175 M | [8] | BOLT (M20X2.5X60-MM) | |
| 4. | 109-6776 | [2] | PIN | |
| 5. | 114-6099 M | [6] | BOLT (M24X3X80-MM) | |
| 6. | 129-3180 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 7. | 267-3507 | [6] | WASHER-HARD (26X47X12-MM THK) | |
| 8. | 3W-7254 | [2] | SPACER (47X80X20-MM THK) | |
| 9. | 3W-7255 | [2] | SPACER (47X80X10-MM THK) | |
| 10. | 539-6877 | [1] | PLATE | |
| 11. | 562-3773 | [1] | PLATE AS | |
| 12. | 6P-5647 | [2] | BOSS | |
| 13. | 7X-0445 | [1] | BOLT (1-1/4-7X5-IN) | |
| 14. | 7X-0451 | [1] | NUT-FULL (1-1/4-7-THD) | |
| 15. | 7X-2543 M | [2] | BOLT (M10X1.5X120-MM) | |
| 16. | 8E-6130 | [2] | LINK AS | |
| (EACH INCLUDES) | ||||
| 2K-4233 | [1] | BOSS | ||
| 17. | 8T-0389 M | [4] | LOCKNUT (M10X1.5-THD) | |
| 18. | 8T-5041 M | [2] | BOLT (M12X1.75X120-MM) | |
| 19. | 8T-6685 M | [2] | BOLT (M10X1.5X110-MM) | |
| 20. | 9W-7469 | [2] | PIN | |
| 21. | 9W-7470 | [2] | PIN | |
| M | METRIC PART | |||
