ELECTRICAL AND STARTING SYSTEM
HARNESS GPWIRING GP
HARNESS GP
ELECTRICAL AND STARTING SYSTEM
HARNESS GP#M00953710250
527-2749: HARNESS AS-SENSOR
527-2749 HARNESS AS-SENSOR
S/N N951-UP
LH WHEEL SPEED
PART OF 501-4810 WIRING GP-FRONT
S/N N951-UP
LH WHEEL SPEED
PART OF 501-4810 WIRING GP-FRONT
For full view, you need register
Parts for your 140 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 328-9098 | [1] | COUPLING AS-PERMANENT | ||
| 165-0017 G | HOSE (74-IN) | |||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6V-9169 | [1] | NUT (13/16-16-THD) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 368-2369 B | TAPE | |||
| 368-2370 B | TAPE | |||
| 210-8958 E | TUBE-HEAT SHRINK (24-MM DIA)(8-CM) | |||
| 6V-8731 | [1] | UNION | ||
| 3E-3377 | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
#M00953710251
527-2750: HARNESS AS-SENSOR
527-2750 HARNESS AS-SENSOR
S/N N951-UP
RH WHEEL SPEED
PART OF 501-4810 WIRING GP-FRONT
S/N N951-UP
RH WHEEL SPEED
PART OF 501-4810 WIRING GP-FRONT
For full view, you need register
Parts for your 140 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 328-9097 | [1] | COUPLING AS-PERMANENT | ||
| 165-0017 G | HOSE (78.7-IN) | |||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6V-9169 | [1] | NUT (13/16-16-THD) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 368-2369 B | TAPE | |||
| 368-2370 B | TAPE | |||
| 210-8958 E | TUBE-HEAT SHRINK (24-MM DIA)(1-CM) | |||
| 6V-8731 | [1] | UNION | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
#M00953710252
546-6070: HARNESS AS-SENSOR
546-6070 HARNESS AS-SENSOR
S/N N951-UP
AWD, FRONT FRAME
PART OF 501-4810 WIRING GP-FRONT
S/N N951-UP
AWD, FRONT FRAME
PART OF 501-4810 WIRING GP-FRONT
For full view, you need register
Parts for your 140 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 274-3774 | [5] | CAP-CONNECTOR | ||
| 274-3777 | [1] | CAP-CONNECTOR | ||
| 212-9865 | [1] | CONNECTOR (23-PIN) | ||
| 155-2270 | [11] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 310-0674 | [1] | LOCKWASHER | ||
| 211-0052 | [1] | NUT (1-11/16-18-THD) | ||
| 8T-8729 | [15] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 237-0227 | [4] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 8T-8730 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [7] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(50-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#M00953710253
549-4417: HARNESS AS-SOLENOID
For full view, you need register
Parts for your 140 MOTOR GRADER:
CATERPILLAR SIS#M00953710254
435-7633: HARNESS AS-TRANSMISSION
435-7633 HARNESS AS-TRANSMISSION
S/N SS41-UP; JP71-UP
PART OF 381-0654 CONTROL GP-TRANSMISSION HYD
S/N SS41-UP; JP71-UP
PART OF 381-0654 CONTROL GP-TRANSMISSION HYD
For full view, you need register
Parts for your 140 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 212-9865 | [1] | CONNECTOR (23-PIN) | ||
| 416-7158 | [1] | COVER-CONNECTOR | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 155-2270 | [17] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 310-0674 | [1] | LOCKWASHER | ||
| 211-0052 | [1] | NUT (1-11/16-18-THD) | ||
| 9X-3401 | [20] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | SEAL-CONNECTOR | |||
| 237-0227 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [18] | PLUG-SEAL | ||
| 114-8843 E | SLEEVE-PLASTIC (380-CM) | |||
| 114-8845 E | SLEEVE-PLASTIC (20-CM) | |||
| 9X-3402 | [93] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#M00953710255
380-3896: HARNESS AS-WIRING
380-3896 HARNESS AS-WIRING -DEF INJECTOR
S/N N951-UP
PART OF 380-5466 WIRING GP-CEM
S/N N951-UP
PART OF 380-5466 WIRING GP-CEM
For full view, you need register
Parts for your 140 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 193-6910 E | INSULATION (76-CM) | |||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 273-3288 | [1] | RECEPTACLE AS-CONNECTOR | ||
| 185-1860 | [2] | SEAL-WIRE | ||
| 368-4831 | [2] | SOCKET-CONNECTOR (17-GA TO 20-GA) | ||
| 268-4412 B | TAPE-INSULATOR | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#M00953710256
441-4482: HARNESS AS-WIRING
441-4482 HARNESS AS-WIRING
S/N SYE1-UP
WITHOUT BRAKES, INJECTOR
PART OF 487-2116 HARNESS AS-ENGINE
S/N SYE1-UP
WITHOUT BRAKES, INJECTOR
PART OF 487-2116 HARNESS AS-ENGINE
For full view, you need register
Parts for your 140 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9G-3695 | [2] | PLUG-SEAL | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [6] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(50-CM) | |||
| 6N-7523 | [1] | WASHER (6.48X11.9X1.57-MM THK) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#M00953710257
498-4442: HARNESS AS-WIRING
For full view, you need register
Parts for your 140 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 177-9648 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 177-9645 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7T-0093 | [2] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-5008 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 455-0706 | [1] | SEAL-CONNECTOR | ||
| 281-3132 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 333-0968 E | SLEEVE (44-CM) | |||
| 7T-0094 | [2] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| E | ORDER BY THE CENTIMETER | |||
#M00953710258
546-6087: HARNESS AS-WIRING
546-6087 HARNESS AS-WIRING -SERVICE CENTER
S/N N951-UP
PART OF 519-3765 WIRING GP-SERVICE CENTER
S/N N951-UP
PART OF 519-3765 WIRING GP-SERVICE CENTER
For full view, you need register
Parts for your 140 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 3E-6446 | [1] | CAP AS-CONNECTOR | ||
| 110-6844 | [1] | SEAL | ||
| 212-9865 | [1] | CONNECTOR (23-PIN) | ||
| 126-1774 | [2] | COVER-CONNECTOR | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 310-0674 | [1] | LOCKWASHER | ||
| 211-0052 | [1] | NUT (1-11/16-18-THD) | ||
| 8T-8729 | [17] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [10] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [26] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 147-1444 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 455-0709 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 281-8803 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [111] | PLUG-SEAL | ||
| 324-6267 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 8T-8730 | [25] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [7] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [33] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-6772 | [4] | STRAP-CABLE | ||
| 2L-8078 | [1] | TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(75-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#M00953710259
546-6088: HARNESS AS-WIRING
For full view, you need register
Parts for your 140 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 311-8740 | [1] | ADAPTER-CONNECTOR | ||
| 311-8745 | [1] | ADAPTER-CONNECTOR | ||
| 382-3077 | [1] | BOOT (1-PIN) | ||
| 274-3777 | [2] | CAP-CONNECTOR | ||
| 274-3781 | [1] | CAP-SEAL | ||
| 231-9897 E | CONDUIT-FLEXIBLE (36-MM ID)(65-CM) | |||
| 213-0141 | [2] | CONNECTOR (1-PIN) | ||
| 237-0336 | [1] | COVER (CONNECTOR) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [4] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 174-0503 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 177-9648 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 167-3693 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 197-7261 | [1] | PLUG AS-CONNECTOR (19-PIN) | ||
| 241-8834 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 455-0709 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [125] | PLUG-SEAL | ||
| 134-2540 | [4] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 7T-0094 | [8] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8T-8730 | [123] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [31] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [86] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 9X-6772 | [2] | STRAP-CABLE | ||
| 131-1503 | [2] | TERMINAL AS-RING | ||
| (EACH INCLUDES) | ||||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM) | |||
| 2L-8052 | [1] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| -OR- | ||||
| 2L-8060 | [1] | TERMINAL-RING (8-GA, 3/8-IN SCREW) | ||
| 2L-8069 | [2] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 311-4859 E | TUBE-HEAT SHRINK (48-MM DIA)(20-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(175-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM) | |||
| 155-2258 | [3] | WEDGE-PLUG LOCK (12-PIN) | ||
| E | ORDER BY THE CENTIMETER | |||
