AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

511-6189 HARNESS AS-SENSOR -ENGINE MASS AIR FLOW PART OF 511-6238 WIRING GP-ENGINE AN ATTACHMENT 310


ELECTRICAL AND STARTING SYSTEM
HARNESS GP
HEATER GP
ELECTRONICS GP-MACHINE
SERVICE EQUIPMENT AND SUPPLIES
KIT-REBUILD
ELECTRICAL AND STARTING SYSTEM
LIGHTING GP

MINI HYD EXCAVATOR 310 MINI HYD EXCAVATOR GWT
 310 Mini Hydraulic Excavator GWT00001-UP (MACHINE) POWERED BY C3.3B Engine M0096088 310 GWT   (2018)

ELECTRICAL AND STARTING SYSTEM

HARNESS GP
522-6482 HARNESS AS-MONITOR
522-6495 HARNESS AS-PUMP
511-6189 HARNESS AS-SENSOR
557-5106 HARNESS AS-SENSOR
557-5107 HARNESS AS-SENSOR
511-6184 HARNESS AS-WIRING
 

#M00960880150
 

511-6189: HARNESS AS-SENSOR

511-6189 HARNESS AS-SENSOR -ENGINE
MASS AIR FLOW
PART OF 511-6238 WIRING GP-ENGINE
AN ATTACHMENT
i07468613 M0096088
  For full view, you need register

Parts for your 310 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  360-3815 [1] PLUG AS  
  8T-8737 [1] PLUG-SEAL  
  151-9275 [1] KIT-RECEPTACLE (6-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  360-3816 [5] TERMINAL (20-GA)  
 

#M00960880151
 

557-5106: HARNESS AS-SENSOR

557-5106 HARNESS AS-SENSOR -CONSOLE
PART OF 511-6234 WIRING GP-CAB
AN ATTACHMENT
i07505704 M0096088
  For full view, you need register

Parts for your 310 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  374-7465 [1] CAP-SEAL  
  374-7467 [1] CAP-SEAL  
  228-5856 [1] CONNECTOR (10-PIN)  
  9X-3401 [12] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [12] PIN-CONNECTOR (14-GA TO 16-GA)  
  331-5048 [1] PLUG AS-CONNECTOR (6-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  560-5813 [2] PLUG AS-CONNECTOR  
  8T-8737 [3] PLUG-SEAL  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  369-3774 [8] SEAL-CONNECTOR  
  9X-3402 [29] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [29] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  283-8106 [6] SOCKET-CONNECTOR (20-GA)  
    -OR-
  374-8372 [6] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  329-3734 B TAPE-ELECTRICAL  
  091-2436 [4] TERMINAL-BLADE (18-GA TO 22-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(65-CM)  
  332-1983 [1] WEDGE-PLUG LOCK (6-PIN)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#M00960880152
 

557-5107: HARNESS AS-SENSOR

557-5107 HARNESS AS-SENSOR -OVERLOAD WARNING
PART OF 511-6223 WIRING GP-OVERLOAD WARNING
AN ATTACHMENT
i07477573 M0096088
  For full view, you need register

Parts for your 310 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  103-2529 E HOSE (60-CM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  230-4013 [1] PLUG AS-CONNECTOR (3-PIN)  
  455-0705 [1] SEAL-CONNECTOR  
  9X-3402 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [3] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  329-3734 B TAPE-ELECTRICAL  
  135-5009 E TUBE-HEAT SHRINK (32-MM DIA)(20-CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#M00960880153
 

511-6184: HARNESS AS-WIRING

511-6184 HARNESS AS-WIRING -ETHERNET
PART OF 561-8101 KIT-CAMERA
AN ATTACHMENT
i07496541 M0096088
  For full view, you need register

Parts for your 310 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  151-9272 [1] KIT-RECEPTACLE (2-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  490-0571 [2] PLUG AS-CONNECTOR (2-PIN)  
  490-0578 [1] PLUG AS-CONNECTOR (2-PIN)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)  
  E   ORDER BY THE CENTIMETER
 

#M00960880154
 

557-5100: HARNESS AS-WIRING

557-5100 HARNESS AS-WIRING -CAMERA
PART OF 522-6469 WIRING GP-CAMERA
AN ATTACHMENT
i07490681 M0096088
  For full view, you need register

Parts for your 310 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  196-8876 E BRAID (BLACK, ONE GOLD STRAND)(240-CM)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  490-0571 [2] PLUG AS-CONNECTOR (2-PIN)  
  490-0578 [1] PLUG AS-CONNECTOR (2-PIN)  
  151-9272 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  329-3734 E TAPE-ELECTRICAL (87-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)  
  E   ORDER BY THE CENTIMETER
 

#M00960880155
 

415-2556: HEATER GP-JACKET WATER

415-2556 HEATER GP-JACKET WATER
PART OF 562-6566, 562-6567 DISTRIBUTION AR
AN ATTACHMENT
i07490700 M0096088
4152556 HEATER GP-JACKET WATER Parts scheme
  For full view, you need register

Parts for your 310 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 321-6069 [1] CORD AS-HEATER ELEMENT (120-VOLT)  
3. 382-8738 [1] HEATER AS-JACKET WATER  
4. 382-8740 [1] HARNESS AS-WIRING (HEATER ELEMENT)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [3] PLUG-SEAL  
 

#M00960880156
 

511-6174: INSTALLATION GP-SECURITY

511-6174 INSTALLATION GP-SECURITY -KEY
AN ATTACHMENT
i07506358 M0096088
5116174 INSTALLATION GP-SECURITY Parts scheme
  For full view, you need register

Parts for your 310 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 205-0826 [1] FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)  
2. 218-0651 [1] FILM-INSTRUCTION (KEY START SWITCH)  
3. 467-8535 [1] SWITCH AS-START (KEY)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 487-3004 Y [2] CONTROL GP-ELECTRONIC  
5. 504-4980 Y [1] ELECTRONICS GP-MACHINE (CONTROL)  
6. 542-8852 Y [1] ELECTRONICS GP-MACHINE (MACHINE SECURITY SYSTEM)  
7. 8C-5607 [4] MOUNT-ISOLATION  
8. 8C-5608 [2] SPACER (6.5X9.5X25.4-MM THK)  
9. 8C-8451 M [2] BOLT (M6X1X40-MM)  
10. 9X-6165 [2] WASHER (6.5X22X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00960880157
 

522-6460: INSTALLATION GP-SECURITY

522-6460 INSTALLATION GP-SECURITY
PART OF 562-6566, 562-6567 DISTRIBUTION AR
AN ATTACHMENT
i07490342 M0096088
5226460 INSTALLATION GP-SECURITY Parts scheme
  For full view, you need register

Parts for your 310 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 218-0651 [1] FILM-INSTRUCTION (KEY START SWITCH)  
2. 467-8535 [1] SWITCH AS-START (KEY)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
 

#M00960880158
 

561-8101: KIT-CAMERA

561-8101 KIT-CAMERA -REAR
AN ATTACHMENT
i07511999 M0096088
  For full view, you need register

Parts for your 310 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  511-6184 Y [1] HARNESS AS-WIRING (ETHERNET)  
  8T-4189 M [6] BOLT (M8X1.25X20-MM)  
  109-1393 M [2] BOLT-SOCKET HEAD (M4X0.7X10-MM)  
  541-8665 [1] BRACKET  
  488-9162 [1] CAMERA GP (12-VOLT)  
  490-0572 [1] RECEPTACLE AS (2-PIN)  
  490-0582 [1] RECEPTACLE AS (2-PIN)  
  4P-7581 [1] CLIP (LADDER)  
  541-8666 [1] PLATE  
  204-1611 [2] STRAP (DUAL)  
  3S-2093 [18] STRAP-CABLE  
  5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00960880159
 

388-3782: LAMP GP-FLOOD

388-3782 LAMP GP-FLOOD
12-VOLT, 55-WATT
PART OF 522-6471 LIGHTING GP-FLOOD
AN ATTACHMENT
i07468579 M0096088
3883782 LAMP GP-FLOOD Parts scheme
  For full view, you need register

Parts for your 310 MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-4291 [1] BRACKET AS  
2. 9X-4244 M [2] SCREW-SPECIAL (M4X1.79X25-MM)  
3. 9W-0607 [1] LAMP (12-VOLT, 55-WATT)(FLOODLIGHT)  
4. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
5. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
6. 5C-7261 M [1] NUT (M8X1.25-THD)  
  M   METRIC PART
 

Information:

Special Instruction
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Caterpillar Parts SIS Catalog 310 :

522-6495 HARNESS AS-PUMP
522-6482 HARNESS AS-MONITOR
511-6185 HARNESS AS-MONITOR
557-5093 HARNESS AS-FRONT
557-5095 HARNESS AS-ENGINE
511-6192 HARNESS AS-ENGINE
557-5092 HARNESS AS-CHASSIS
557-5091 HARNESS AS-CHASSIS
557-5106 HARNESS AS-SENSOR
557-5107 HARNESS AS-SENSOR
511-6184 HARNESS AS-WIRING
557-5100 HARNESS AS-WIRING
HEATER GP-JACKET WATER
415-2556 HEATER GP-JACKET WATER
INSTALLATION GP-SECURITY
511-6174 INSTALLATION GP-SECURITY
INSTALLATION GP-SECURITY
522-6460 INSTALLATION GP-SECURITY
561-8101 KIT-CAMERA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.