AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

516-3631 BOOM GP -REACH S/N KEL1-UP 6.15-M (20.8-FT). HEAVY DUTY PART OF 516-8562 BOOM AR-REACH 330 GC


IMPLEMENTS
BOOM GP
LINES GP-GREASE
LINKAGE GP

EXCAVATOR 330 GC EXCAVATOR FEK
 330 & 330 GC Excavators FEK00001-UP (MACHINE) POWERED BY C7.1 Engine M0096793 330 GC FEK   (2016)

IMPLEMENTS

BOOM GP
516-8563 BOOM AR
559-9607 BOOM AR
516-8562 BOOM AR-REACH
559-9606 BOOM AR-REACH
BOOM GP
516-3631 BOOM GP
BOOM GP
532-6332 BOOM GP
BOOM GP
561-4193 BOOM GP
BOOM GP
561-4197 BOOM GP
 

#M00967930620
 

516-3631: BOOM GP

516-3631 BOOM GP -REACH
S/N KEL1-UP
6.15-M (20.8-FT). HEAVY DUTY
PART OF 516-8562 BOOM AR-REACH
i07516420 M0096793
5163631 BOOM GP Parts scheme
  For full view, you need register

Parts for your 330 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 166-1497 [2] SEAL-LIP TYPE  
2. 7Y-2390 [2] PLATE  
3. 087-5955 [2] SPACER (93X130X8-MM THK)  
4. 093-0090 B [1] SHIM (1-MM THK)  
5. 093-0349 [1] WASHER (22X60X6-MM THK)  
6. 093-0363 [1] SPACER (83X120X12-MM THK)  
7. 133-2427 B [1] SHIM (0.5-MM THK)  
8. 166-1487 [2] SHIM (2-MM THK)  
9. 166-1488 [2] SHIM (2-MM THK)  
10. 186-5637 [1] PIN  
11. 324-0938 [1] PLATE  
12. 447-1709 M [2] BOLT (M16X2X45-MM)  
13. 451-2175 [2] WASHER-HARD (17.5X30X3.5-MM THK)  
14. 451-2176 [1] WASHER-HARD (22X35X3.5-MM THK)  
15. 451-2182 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 453-2844 M [1] BOLT (M20X2.5X30-MM)  
17. 453-3446 M [6] BOLT (M12X1.75X35-MM)  
18. 536-5608 [1] PIN AS  
19. 516-3632 [1] BOOM & BEARING AS  
19A. 514-7653 [2] BEARING-SLEEVE  
20. 561-7049 [1] PIN AS  
  B   USE AS REQUIRED
  M   METRIC PART
 

#M00967930621
 

532-6332: BOOM GP

532-6332 BOOM GP -MASS
S/N KEL1-UP
5.55-M (18.2-FT)
PART OF 516-8563 BOOM AR
i07538702 M0096793
5326332 BOOM GP Parts scheme
  For full view, you need register

Parts for your 330 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 166-1497 [2] SEAL-LIP TYPE  
2. 4I-0575 B [1] SHIM (1-MM THK)  
3. 7Y-2390 [2] PLATE  
4. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
6. 087-5955 [2] SPACER (93X130X8-MM THK)  
7. 093-0349 [1] WASHER (22X60X6-MM THK)  
8. 093-0363 [1] SPACER (83X120X12-MM THK)  
9. 133-2428 B [1] SHIM (0.5-MM THK)  
10. 166-1487 [2] SHIM (2-MM THK)  
11. 166-1489 [2] SHIM (2-MM THK)  
12. 186-5637 [1] PIN  
13. 324-0938 [1] PLATE  
14. 364-4954 [1] PIN AS  
15. 447-1709 M [2] BOLT (M16X2X45-MM)  
16. 451-2175 [2] WASHER-HARD (17.5X30X3.5-MM THK)  
17. 451-2176 [1] WASHER-HARD (22X35X3.5-MM THK)  
18. 453-2844 M [1] BOLT (M20X2.5X30-MM)  
19. 536-5608 [1] PIN AS  
20. 532-6333 [1] BOOM & BEARING AS  
20A. 514-7653 [2] BEARING-SLEEVE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#M00967930622
 

561-4193: BOOM GP

561-4193 BOOM GP -REACH
S/N FEK1-UP
6.15-M (20.17-FT)
PART OF 559-9606 BOOM AR-REACH
i07538698 M0096793
5614193 BOOM GP Parts scheme
  For full view, you need register

Parts for your 330 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 166-1497 [2] SEAL-LIP TYPE  
2. 7Y-2390 [2] PLATE  
3. 087-5955 [2] SPACER (93X130X8-MM THK)  
4. 093-0090 B [1] SHIM (1-MM THK)  
5. 093-0349 [1] WASHER (22X60X6-MM THK)  
6. 093-0363 [1] SPACER (83X120X12-MM THK)  
7. 504-7598 [1] BOOM & BEARING AS  
7A. 514-7653 [2] BEARING-SLEEVE  
8. 166-1487 [2] SHIM (2-MM THK)  
9. 166-1488 [2] SHIM (2-MM THK)  
10. 186-5637 [1] PIN  
11. 324-0938 [1] PLATE  
12. 343-9249 [1] PIN AS  
13. 447-1709 M [2] BOLT (M16X2X45-MM)  
14. 451-2175 [2] WASHER-HARD (17.5X30X3.5-MM THK)  
15. 451-2176 [1] WASHER-HARD (22X35X3.5-MM THK)  
16. 451-2182 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 453-2844 M [1] BOLT (M20X2.5X30-MM)  
18. 453-3446 M [6] BOLT (M12X1.75X35-MM)  
19. 536-5608 [1] PIN AS  
20. 133-2427 B [1] SHIM (0.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#M00967930623
 

561-4197: BOOM GP

561-4197 BOOM GP -MASS
S/N FEK1-UP
5.55-M (18.2-FT)
PART OF 559-9607 BOOM AR
i07516419 M0096793
5614197 BOOM GP Parts scheme
  For full view, you need register

Parts for your 330 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 166-1497 [2] SEAL-LIP TYPE  
2. 4I-0575 B [1] SHIM (1-MM THK)  
3. 7Y-2390 [2] PLATE  
4. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
6. 087-5955 [2] SPACER (93X130X8-MM THK)  
7. 093-0349 [1] WASHER (22X60X6-MM THK)  
8. 093-0363 [1] SPACER (83X120X12-MM THK)  
9. 133-2428 B [1] SHIM (0.5-MM THK)  
10. 166-1487 [2] SHIM (2-MM THK)  
11. 166-1489 [2] SHIM (2-MM THK)  
12. 186-5637 [1] PIN  
13. 324-0938 [1] PLATE  
14. 364-4954 [1] PIN AS  
15. 447-1709 M [2] BOLT (M16X2X45-MM)  
16. 451-2175 [2] WASHER-HARD (17.5X30X3.5-MM THK)  
17. 451-2176 [1] WASHER-HARD (22X35X3.5-MM THK)  
18. 453-2844 M [1] BOLT (M20X2.5X30-MM)  
19. 536-5608 [1] PIN AS  
20. 561-4198 [1] BOOM & BEARING AS  
20A. 514-7653 [2] BEARING-SLEEVE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#M00967930624
 

545-9907: LINES GP-GREASE

545-9907 LINES GP-GREASE -REACH BOOM
S/N FEK1-UP; KEL1-UP
PART OF 516-8562, 559-9606 BOOM AR-REACH
FOR USE WITH 6.15-M (20.18-FT) BOOM
i07503720 M0096793
5459907 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 330 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8485 [5] ELBOW  
2. 5K-9243 [2] ELBOW-FLARED  
3. 6L-3616 [2] CONNECTOR  
4. 115-2677 I [1] HOSE AS  
5. 120-7224 [1] HOSE AS  
6. 166-1579 [4] CLIP  
7. 186-5559 [1] TUBE AS  
8. 186-5560 [1] TUBE AS  
9. 203-7239 I [1] HOSE AS  
10. 033-8248 [4] CLIP (LOOP)  
11. 8M-2772 [2] CLIP (LOOP)  
12. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4133 M [6] NUT (M10X1.5-THD)  
14. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00967930625
 

545-9908: LINES GP-GREASE

545-9908 LINES GP-GREASE
S/N FEK1-UP; KEL1-UP
PART OF 516-8563, 559-9607 BOOM AR
FOR USE WITH 5.55-M (18.2-FT) BOOM
i07503300 M0096793
5459908 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 330 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8485 [5] ELBOW  
2. 5K-9243 [2] ELBOW-FLARED  
3. 6L-3616 [2] CONNECTOR  
4. 115-2678 I [1] HOSE AS  
5. 121-8460 I [1] HOSE AS  
6. 121-8662 I [1] HOSE AS  
7. 166-1579 [3] CLIP  
8. 186-5559 [1] TUBE AS  
9. 186-5560 [1] TUBE AS  
10. 033-8248 [4] CLIP (LOOP)  
11. 8M-2772 [2] CLIP (LOOP)  
12. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4133 M [5] NUT (M10X1.5-THD)  
14. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00967930626
 

521-8015: LINKAGE GP-BUCKET

521-8015 LINKAGE GP-BUCKET -CB2-FAMILY, WITH LIFTING EYE
S/N KEL1-UP
PART OF 561-8943 DISTRIBUTION AR
i07527634 M0096793
5218015 LINKAGE GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 330 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [5] FITTING-GREASE (1/8-27 PTF)  
2. 093-0349 [2] WASHER (22X60X6-MM THK)  
3. 166-1487 [2] SHIM (2-MM THK)  
4. 166-1495 [6] SEAL-LIP TYPE  
5. 517-2508 [1] PIN  
6. 517-2506 [1] LINK AS  
7. 234-3928 [1] LINK  
8. 517-2509 [1] PIN  
9. 234-3931 [2] PIN AS  
10. 521-8016 [1] LINK & BEARING AS  
10A. 489-3008 [4] BEARING-SLEEVE  
11. 367-8468 [4] SEAL-O-RING  
12. 186-5649 M [1] BOLT (M20X2.5X160-MM)  
13. 189-3925 M [1] BOLT (M20X2.5X170-MM)  
14. 451-2176 [2] WASHER-HARD (22X35X3.5-MM THK)  
15. 451-2184 M [4] NUT (M20X2.5-THD)  
16. 453-2845 M [2] BOLT (M20X2.5X40-MM)  
17. 517-2510 [1] SPACER (72X130X18-MM THK)  
18. 517-2511 [1] SPACER (92X170X18-MM THK)  
  M   METRIC PART
 

#M00967930627
 

521-8019: LINKAGE GP-BUCKET

521-8019 LINKAGE GP-BUCKET -CB2-FAMILY
S/N KEL1-UP
PART OF 561-8941, 561-8942 DISTRIBUTION AR
i07524151 M0096793
5218019 LINKAGE GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 330 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [5] FITTING-GREASE (1/8-27 PTF)  
2. 166-1487 [2] SHIM (2-MM THK)  
3. 234-3928 [1] LINK  
4. 234-3931 [2] PIN AS  
5. 451-2176 [2] WASHER-HARD (22X35X3.5-MM THK)  
6. 451-2184 M [4] NUT (M20X2.5-THD)  
7. 453-2845 M [2] BOLT (M20X2.5X40-MM)  
8. 517-2506 [1] LINK AS  
9. 517-2508 [1] PIN  
10. 517-2509 [1] PIN  
11. 517-2510 [1] SPACER (72X130X18-MM THK)  
12. 517-2511 [1] SPACER (92X170X18-MM THK)  
13. 521-8020 [1] LINK & BEARING AS  
13A. 489-3008 [4] BEARING-SLEEVE  
14. 093-0349 [2] WASHER (22X60X6-MM THK)  
15. 166-1495 [6] SEAL-LIP TYPE  
16. 186-5649 M [1] BOLT (M20X2.5X160-MM)  
17. 189-3925 M [1] BOLT (M20X2.5X170-MM)  
18. 367-8468 [4] SEAL-O-RING  
  M   METRIC PART
 

#M00967930628
 

521-8022: LINKAGE GP-BUCKET

521-8022 LINKAGE GP-BUCKET -CB2-FAMILY, WITH LIFTING EYE
S/N FEK1-UP
i07536607 M0096793
5218022 LINKAGE GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 330 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [5] FITTING-GREASE (1/8-27 PTF)  
2. 093-0349 [2] WASHER (22X60X6-MM THK)  
3. 166-1487 [2] SHIM (2-MM THK)  
4. 166-1495 [6] SEAL-LIP TYPE  
5. 186-5662 [1] PIN  
6. 234-3927 [1] LINK AS  
7. 234-3928 [1] LINK  
8. 234-3930 [1] PIN  
9. 234-3931 [2] PIN AS  
10. 521-8016 [1] LINK & BEARING AS  
10A. 489-3008 [2] BEARING-SLEEVE  
10B. 489-3008 [2] BEARING-SLEEVE  
11. 367-8468 [4] SEAL-O-RING  
12. 186-5649 M [1] BOLT (M20X2.5X160-MM)  
13. 576-3067 M [1] BOLT-HEAD (M20X2.5X170-MM)  
14. 451-2176 [2] WASHER-HARD (22X35X3.5-MM THK)  
15. 451-2184 M [4] NUT (M20X2.5-THD)  
16. 453-2845 M [2] BOLT (M20X2.5X40-MM)  
  M   METRIC PART
 

#M00967930629
 

521-8023: LINKAGE GP-BUCKET

521-8023 LINKAGE GP-BUCKET -CB2-FAMILY
S/N FEK1-UP
PART OF 556-5577, 561-8933, 571-6943, 577-3112 DISTRIBUTION AR
i07523771 M0096793
5218023 LINKAGE GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 330 GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [5] FITTING-GREASE (1/8-27 PTF)  
2. 093-0349 [2] WASHER (22X60X6-MM THK)  
3. 166-1487 [2] SHIM (2-MM THK)  
4. 166-1495 [6] SEAL-LIP TYPE  
5. 186-5662 [1] PIN  
6. 234-3927 [1] LINK AS  
7. 234-3928 [1] LINK  
8. 234-3930 [1] PIN  
9. 234-3931 [2] PIN AS  
10. 521-8020 [1] LINK & BEARING AS  
10A. 489-3008 [2] BEARING-SLEEVE  
11. 367-8468 [4] SEAL-O-RING  
12. 186-5649 M [1] BOLT (M20X2.5X160-MM)  
13. 189-3925 M [1] BOLT (M20X2.5X170-MM)  
14. 451-2176 [2] WASHER-HARD (22X35X3.5-MM THK)  
15. 451-2184 M [4] NUT (M20X2.5-THD)  
16. 453-2845 M [2] BOLT (M20X2.5X40-MM)  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 330 GC :

559-9606 BOOM AR-REACH
516-8562 BOOM AR-REACH
559-9607 BOOM AR
516-8563 BOOM AR
VALVE GP-SOLENOID & PRESS REDC
549-7972 VALVE GP-SOLENOID & PRESS REDC
VALVE GP-SOLENOID & MANIFOLD
529-0429 VALVE GP-SOLENOID & MANIFOLD
VALVE GP-SOLENOID & MANIFOLD
515-2709 VALVE GP-SOLENOID & MANIFOLD
VALVE GP-RELIEF
352-7123 VALVE GP-RELIEF
BOOM GP
532-6332 BOOM GP
BOOM GP
561-4193 BOOM GP
BOOM GP
561-4197 BOOM GP
LINES GP-GREASE
545-9907 LINES GP-GREASE
LINES GP-GREASE
545-9908 LINES GP-GREASE
LINKAGE GP-BUCKET
521-8015 LINKAGE GP-BUCKET
LINKAGE GP-BUCKET
521-8019 LINKAGE GP-BUCKET
LINKAGE GP-BUCKET
521-8022 LINKAGE GP-BUCKET
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.