ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#M00978670310
418-0928: WIRING GP-ENGINE
418-0928 WIRING GP-ENGINE
S/N 4501-UP; E7A1-UP
PART OF 557-2132, 557-2133, 567-0000, 567-0002 ENGINE AR-PRIMARY
S/N 4501-UP; E7A1-UP
PART OF 557-2132, 557-2133, 567-0000, 567-0002 ENGINE AR-PRIMARY
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 100-4830 M | [1] | BOLT (M10X1.5X20-MM) | |
| 2. | 124-3815 M | [2] | BOLT (M8X1.25X16-MM) | |
| 3. | 217-9039 | [1] | STRAP-CABLE | |
| 4. | 348-4637 | [1] | BOLT | |
| 5. | 377-1293 | [1] | BRACKET | |
| 6. | 389-3863 | [1] | BRACKET | |
| 7. | 416-5388 Y | [1] | HARNESS AS-ENGINE | |
| 8. | 375-8407 Y | [3] | HARNESS AS-WIRING (INJECTOR) | |
| 9. | 232-1693 M | [1] | BOLT-FLANGE HEAD (M6X1X35-MM) | |
| 10. | 277-5065 | [3] | CLIP | |
| 11. | 033-6034 | [3] | SEAL-O-RING | |
| 12. | 352-3964 | [1] | CLIP (LADDER) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00978670311
452-1810: WIRING GP-FRONT
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 2. | 3E-3636 | [1] | SWITCH AS-BALL | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 4. | 163-1201 | [1] | HORN AS (24-VOLT, LOW TONE) | |
| 5. | 130-5300 | [2] | CLIP | |
| 6. | 132-5789 | [2] | CLIP (LADDER) | |
| 7. | 197-6453 | [1] | BRACKET AS | |
| 8. | 204-2281 | [2] | STRAP-CABLE | |
| 9. | 204-8000 | [2] | MOUNTING-CABLE TIE | |
| 10. | 221-3525 | [2] | GROMMET | |
| 11. | 237-9960 | [1] | CLIP (LADDER) | |
| 12. | 328-0181 | [1] | STRAP AS-GROUND | |
| 13. | 344-5675 M | [1] | NUT (M10X1.5-THD) | |
| 14. | 352-3964 | [3] | CLIP (LADDER) | |
| 15. | 3J-1907 | [1] | SEAL-O-RING | |
| 16. | 4P-7429 | [1] | CLIP (LADDER) | |
| 17. | 4P-7581 | [7] | CLIP (LADDER) | |
| 18. | [1] | BRACKET | ||
| 19. | 564-2828 Y | [1] | HARNESS AS-FRONT | |
| 20. | 7K-1181 | [30] | STRAP-CABLE | |
| 21. | 8F-1974 | [10] | SHIM (0.13-MM THK) | |
| 22. | 8T-4121 | [18] | WASHER-HARD (11X21X2.5-MM THK) | |
| 23. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 24. | 8T-4191 M | [2] | BOLT (M10X1.5X16-MM) | |
| 25. | 9X-9365 | [1] | BRACKET (LAMP) | |
| 26. | 7X-7877 E | STRIP-EDGE (10-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00978670312
452-1878: WIRING GP-FRONT
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 395-2113 Y | [2] | LAMP GP-SIGNAL (24-VOLT, LED)(STOP, TAIL, TURN) | |
| 2. | 6V-3987 D | SEAL (0.1-M EACH) | ||
| 3. | 3E-5169 | [1] | GUARD-SWITCH | |
| 4. | 7K-1181 | [28] | STRAP-CABLE | |
| 5. | 109-0361 | [1] | FILM-INSTRUCTION (ENGINE SHUTDOWN) | |
| 6. | 213-9100 | [1] | ALARM AS (BACKUP) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-1813 E | SLEEVE (29-CM) | |||
| 6A-3361 J | WIRE-ELECTRICAL (16-GA)(4-DM) | |||
| 7. | 243-5821 | [1] | BRACKET AS | |
| 8. | 261-1502 Y | [2] | LAMP GP (24-VOLT)(REVERSE) | |
| 9. | 353-4515 | [1] | SWITCH GP-TOGGLE (LIGHT) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 3E-3390 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 10. | 399-5992 Y | [2] | HARNESS AS-LIGHTING (STOP, TAIL, TURN) | |
| 11. | 519-5922 Y | [1] | HARNESS AS-LIGHTING (FRONT) | |
| 12. | 521-2672 | [1] | BRACKET AS | |
| 13. | 130-5300 | [6] | CLIP | |
| 14. | 344-5673 M | [12] | NUT (M6X1-THD) | |
| 15. | 344-5674 M | [2] | NUT (M8X1.25-THD) | |
| 16. | 4P-7581 | [4] | CLIP (LADDER) | |
| 17. | 5P-4116 | [6] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 18. | 8T-4121 | [9] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4136 M | [5] | BOLT (M10X1.5X25-MM) | |
| 20. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 21. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 22. | 9X-8256 | [12] | WASHER (6.6X12X2-MM THK) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| J | ORDER BY THE DECIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00978670313
452-1871: WIRING GP-GRADE CONTROL
452-1871 WIRING GP-GRADE CONTROL
S/N E921-UP
PART OF 468-2246, 561-7230, 561-7235 GRADE CONTROL AR
S/N E921-UP
PART OF 468-2246, 561-7230, 561-7235 GRADE CONTROL AR
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [42] | STRAP-CABLE | |
| 2. | 9R-2081 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 6V-8224 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 3. | 132-8487 | [4] | NUT-RING | |
| 4. | 169-5414 | [1] | CLIP | |
| 5. | 236-8826 | [4] | BOSS (1-1/8-18X0.708-IN) | |
| 6. | 255-3482 | [1] | BRACKET | |
| 7. | 276-6807 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8. | 319-5176 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 9. | 327-0560 | [1] | BRACKET (RH) | |
| 10. | 327-0561 | [1] | BRACKET (LH) | |
| 11. | 448-1893 | [1] | BRACKET AS | |
| 13. | 474-5410 Y | [1] | HARNESS AS-SENSOR (ROTATION SENSOR) | |
| 14. | 540-0927 Y | [1] | HARNESS AS-CONTROL (BLADE RAISE, LOWER, TILT) | |
| 15. | 482-0423 Y | [1] | HARNESS AS-SENSOR (BLADE SLOPE) | |
| 16. | 541-1716 | [1] | BRACKET | |
| 17. | 482-0427 | [1] | COVER | |
| 18. | 510-2187 | [1] | BRACKET AS | |
| 19. | 511-2430 | [1] | BRACKET AS (LH) | |
| 20. | 511-2431 | [1] | BRACKET AS (RH) | |
| 21. | 513-1593 | [1] | PLATE | |
| 22. | 563-7606 Y | [1] | HARNESS AS-CONTROL (BLADE SLOPE)(ROTATE) | |
| 23. | 107-1716 | [16] | SCREW (4-1/2-40X0.63-IN) | |
| 24. | 122-0450 | [2] | GROMMET | |
| 25. | 130-5300 | [3] | CLIP | |
| 26. | 131-3539 M | [4] | SCREW-FLAT HEAD (M8X1.25X30-MM) | |
| 27. | 174-9692 | [4] | SPACER (20.5X35X16-MM THK) | |
| 28. | 1J-6762 | [4] | BOLT-PLOW (3/4-10X3-IN) | |
| 29. | 1K-6870 | [1] | LOCKNUT (3/4-10-THD) | |
| 30. | 1S-0994 | [1] | CLIP (LOOP)(SLOT) | |
| 31. | 204-2281 | [2] | STRAP-CABLE | |
| 32. | 204-8000 | [2] | MOUNTING-CABLE TIE | |
| 33. | 329-3356 M | [1] | NUT (M12X1.75-THD) | |
| 34. | 344-5675 M | [1] | NUT (M10X1.5-THD) | |
| 35. | 352-3968 | [2] | CLIP (LADDER) | |
| 36. | 4P-7581 | [6] | CLIP (LADDER) | |
| 37. | 4P-8134 | [3] | CLIP (LADDER) | |
| 38. | 5P-1076 | [8] | WASHER-HARD (13.5X30X4-MM THK) | |
| 39. | 5P-4135 | [1] | BOLT (3/4-10X8-IN) | |
| 40. | 5P-9299 | [3] | CLIP (LOOP) | |
| 41. | 6B-6205 | [1] | SPACER (0.438X0.875X1.281-IN THK) | |
| 42. | 6D-3479 | [4] | CLIP (LOOP) | |
| 43. | 6V-1249 | [2] | GROMMET (22-MM ID) | |
| 44. | 6V-8182 | [4] | NUT (3/4-10-THD) | |
| 45. | 7X-0619 | [4] | WASHER-HARD (20X30X2.5-MM THK) | |
| 46. | 7X-7729 | [8] | WASHER (11X25X3-MM THK) | |
| 47. | 8C-6857 | [4] | BOLT (3/4-10X2.75-IN) | |
| 48. | 8M-2773 | [2] | CLIP (LOOP) | |
| 49. | 8S-0948 | [1] | CLIP (SLOT)(SLOT) | |
| 50. | 8T-1897 | [2] | CLIP (SLOT) | |
| 51. | 8T-1898 | [2] | CLIP (TAB) | |
| 52. | 8T-4121 | [34] | WASHER-HARD (11X21X2.5-MM THK) | |
| 53. | 8T-4123 | [4] | WASHER (22X35X3.5-MM THK) | |
| 54. | 8T-4136 M | [10] | BOLT (M10X1.5X25-MM) | |
| 55. | 8T-4137 M | [21] | BOLT (M10X1.5X20-MM) | |
| 56. | 8T-4172 M | [1] | BOLT (M10X1.5X80-MM) | |
| 57. | 8T-0558 M | [4] | BOLT-SELF-LOCKING (M12X1.75X50-MM) | |
| 58. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 59. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 60. | 9C-5344 | [2] | SPACER (10.5X20X18-MM THK) | |
| 61. | 9X-2041 M | [4] | SCREW-TRUSS HEAD (M10X1.5X20-MM) | |
| 62. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| 63. | 132-5789 | [1] | CLIP (LADDER) | |
| 64. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 65. | 7X-7877 E | STRIP-EDGE (10-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00978670314
490-2612: WIRING GP-GRADE CONTROL
490-2612 WIRING GP-GRADE CONTROL
S/N E921-UP
PART OF 468-2246, 561-7235 GRADE CONTROL AR
S/N E921-UP
PART OF 468-2246, 561-7235 GRADE CONTROL AR
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [10] | STRAP-CABLE | |
| 2. | 7K-1181 | [45] | STRAP-CABLE | |
| 3. | 9X-2045 M | [1] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 4. | 152-6825 | [1] | KNOB AS (BLADE LIFT, LH) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5. | 236-6253 | [1] | GROMMET | |
| 6. | 246-6562 | [1] | KNOB AS (LH) | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7. | 430-7160 | [1] | CONTROL GP-ELECTRONIC (ECM) | |
| 467-6039 | [1] | CAP-CONNECTOR | ||
| 467-6040 | [1] | CAP-CONNECTOR | ||
| 479-8364 | [2] | CLIP-CONNECTOR | ||
| 8. | 269-7678 | [2] | CLIP | |
| 9. | 114-6658 | [4] | WASHER (6.5X17X1-MM THK) | |
| 10. | 130-5300 | [2] | CLIP | |
| 11. | 152-6824 | [1] | KNOB AS (BLADE LIFT, RH) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 12. | 156-6175 | [3] | CLIP (LADDER) | |
| 13. | 246-6561 | [1] | KNOB AS (RH) | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 14. | 453-9923 | [1] | RELAY AS (12-VOLT)(POWER) | |
| 14A. | 453-9923 | [1] | RELAY AS (12-VOLT)(IMPLEMENT CONTROL) | |
| 14B. | 453-9923 | [1] | RELAY AS (12-VOLT)(MAST) | |
| 15. | 490-6759 Y | [1] | HARNESS AS-CONTROL (ECM) | |
| 16. | 490-6760 Y | [1] | HARNESS AS-CONTROL (GRADE CONTROL) | |
| 17. | 4P-7581 | [1] | CLIP (LADDER) | |
| 18. | 522-5061 | [1] | SPACER (6.6X16X26-MM THK) | |
| 19. | 528-2323 | [1] | KNOB AS (RH) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 20. | 6V-7728 M | [4] | BOLT (M6X1X45-MM) | |
| 21. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 22. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 23. | 8T-4970 M | [4] | BOLT (M6X1X14-MM) | |
| 24. | 9X-2038 | [2] | WASHER (7X19X2-MM THK) | |
| 25. | 9X-2480 M | [1] | BOLT (M6X1X45-MM) | |
| 26. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00978670315
549-0557: WIRING GP-GRADE CONTROL
549-0557 WIRING GP-GRADE CONTROL -BLADE SLOPE
S/N E921-UP
PART OF 561-7616 GRADE CONTROL AR
S/N E921-UP
PART OF 561-7616 GRADE CONTROL AR
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 2. | 8T-5005 M | [3] | BOLT (M10X1.5X70-MM) | |
| 3. | 7K-1181 | [17] | STRAP-CABLE | |
| 4. | 130-5300 | [2] | CLIP | |
| 5. | 132-5789 | [1] | CLIP (LADDER) | |
| 6. | 150-5785 | [2] | DOWEL | |
| 7. | 169-5414 | [1] | CLIP | |
| 8. | 1S-0994 | [1] | CLIP (LOOP) | |
| 9. | 329-3356 M | [1] | NUT (M12X1.75-THD) | |
| 10. | 344-5675 M | [3] | NUT (M10X1.5-THD) | |
| 11. | 4P-7428 | [1] | CLIP (LADDER) | |
| 12. | 4P-7581 | [3] | CLIP (LADDER) | |
| 13. | 501-1450 | [1] | SENSOR AS-POSITION (INERTIAL MEASUREMENT UNIT) | |
| 14. | 533-1187 | [1] | BRACKET-SENSOR | |
| 15. | 533-5116 | [1] | PLATE | |
| 16. | 549-0559 Y | [1] | HARNESS AS-CONTROL (BLADE SLOPE) | |
| 17. | 563-7606 Y | [1] | HARNESS AS-CONTROL (BLADE SLOPE) | |
| 18. | 563-9806 Y | [1] | HARNESS AS-CONTROL (BLADE SLOPE) | |
| 19. | 7X-2537 M | [3] | BOLT (M8X1.25X35-MM) | |
| 20. | 8S-0948 | [1] | CLIP (SLOT) | |
| 21. | 8T-4121 | [15] | WASHER-HARD (11X21X2.5-MM THK) | |
| 22. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 23. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 24. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00978670316
562-4381: WIRING GP-GRADE CONTROL
562-4381 WIRING GP-GRADE CONTROL
S/N E921-UP
PART OF 561-7230 GRADE CONTROL AR
S/N E921-UP
PART OF 561-7230 GRADE CONTROL AR
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 7K-1181 | [44] | STRAP-CABLE | |
| 3. | 8T-8737 | [7] | PLUG-SEAL | |
| 4. | 9X-2045 M | [1] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 5. | 236-6253 | [1] | GROMMET | |
| 6. | 430-7160 | [1] | CONTROL GP-ELECTRONIC (ECM) | |
| 467-6039 | [1] | CAP-CONNECTOR | ||
| 467-6040 | [1] | CAP-CONNECTOR | ||
| 479-8364 | [2] | CLIP-CONNECTOR | ||
| 7. | 269-7678 | [2] | CLIP | |
| 8. | 114-6658 | [4] | WASHER (6.5X17X1-MM THK) | |
| 9. | 130-5300 | [2] | CLIP | |
| 10. | 156-6175 | [3] | CLIP (LADDER) | |
| 11. | 374-7464 | [1] | CAP-SEAL | |
| 12. | 374-7465 | [2] | CAP-SEAL | |
| 13. | 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | |
| 14. | 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | |
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 15. | 453-9923 | [1] | RELAY AS (12-VOLT)(POWER) | |
| 15A. | 453-9923 | [1] | RELAY AS (12-VOLT)(MAST) | |
| 15B. | 453-9923 | [1] | RELAY AS (12-VOLT)(IMPLEMENT CONTROLS) | |
| 16. | 490-6759 Y | [1] | HARNESS AS-CONTROL (ECM) | |
| 17. | 490-6760 Y | [1] | HARNESS AS-CONTROL (GRADE CONTROL) | |
| 18. | 4P-7581 | [1] | CLIP (LADDER) | |
| 19. | 522-5061 | [1] | SPACER (6.6X16X26-MM THK) | |
| 20. | 6V-7728 M | [4] | BOLT (M6X1X45-MM) | |
| 21. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 22. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 23. | 8T-4970 M | [4] | BOLT (M6X1X14-MM) | |
| 24. | 9X-2038 | [2] | WASHER (7X19X2-MM THK) | |
| 25. | 9X-2480 M | [1] | BOLT (M6X1X45-MM) | |
| 26. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00978670317
569-8855: WIRING GP-LIGHTING
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 236-6253 | [1] | GROMMET | |
| 2. | 246-9371 | [1] | COVER-RELAY | |
| 3. | 569-8857 Y | [1] | HARNESS AS-LIGHTING (BEACON) | |
| 4. | 569-8858 Y | [1] | HARNESS AS-LIGHTING (ROOF)(DOME) | |
| 5. | 7G-7053 | [1] | GROMMET | |
| 6. | 7K-1181 | [34] | STRAP-CABLE | |
| 7. | 8T-4970 M | [1] | BOLT (M6X1X14-MM) | |
| 8. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00978670318
435-9583: WIRING GP-PUMP
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS#M00978670319
434-2338: WIRING GP-REAR
For full view, you need register
Parts for your 120 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 2. | 7K-1181 | [34] | STRAP-CABLE | |
| 3. | 116-4491 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 160-8708 | [1] | BRACKET AS | |
| 5. | 166-0690 | [1] | BLOCK AS-MOUNTING | |
| 6. | 173-1583 | [1] | BRACKET AS | |
| 7. | 201-1024 | [1] | BRACKET | |
| 8. | 264-4297 | [1] | SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL) | |
| 137-6645 | [1] | PAD-CONNECTOR | ||
| 9. | 266-1467 Y | [1] | SENSOR GP-POSITION (ROTARY)(ARTICULATION ANGLE) | |
| 10. | 344-5675 M | [5] | NUT (M10X1.5-THD) | |
| 11. | 344-7391 | [1] | SENSOR-PRESSURE (EJECTOR)(BRAKE CHARGE) | |
| 12. | [1] | LEVER | ||
| 13. | [1] | BRACKET | ||
| 14. | 440-6977 | [1] | BRACKET AS | |
| 9R-2672 M | [1] | BOSS-THREADED (M10X1.5X120-MM) | ||
| 15. | 444-7220 | [1] | LINK AS | |
| 6F-0612 | [1] | NUT-JAM (1/4-28-THD) | ||
| 8S-7048 | [1] | ROD END | ||
| 9L-3334 | [1] | NUT-PLATED (1/4-28-THD, LH) | ||
| 036-7232 | [1] | ROD END | ||
| 444-7221 | [1] | ROD | ||
| 16. | 541-6742 Y | [1] | HARNESS AS-REAR (XMSN CONTROL) | |
| 17. | 562-1550 Y | [1] | HARNESS AS-REAR (FUEL TANK) | |
| 18. | 482-0435 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | ||
| 19. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| 20. | 130-5300 | [4] | CLIP | |
| 21. | 8T-4182 M | [1] | BOLT (M10X1.5X45-MM) | |
| 22. | 132-5789 | [4] | CLIP (LADDER) | |
| 23. | 142-3953 M | [1] | STUD (M10X1.5-THD) | |
| 24. | 204-2281 | [21] | STRAP-CABLE | |
| 25. | 204-8000 | [19] | MOUNTING-CABLE TIE | |
| 26. | 199-7854 | [1] | SPACER (11.8X20X45-MM THK) | |
| 27. | 227-6715 M | [3] | STUD (M10X1.5X30-MM) | |
| 28. | 2F-7888 | [2] | SCREW-MACHINE (10-32X1.25-IN) | |
| 29. | 330-6723 M | [1] | STUD (M10X1.5X40.5-MM) | |
| 30. | 352-3964 | [1] | CLIP (LADDER) | |
| 31. | 3J-1907 | [1] | SEAL-O-RING | |
| 32. | 3K-0360 | [1] | SEAL-O-RING | |
| 33. | 3B-4619 | [1] | PIN-COTTER | |
| 34. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 35. | 4M-5281 | [2] | BOLT (1/4-20X0.75-IN) | |
| 36. | 4P-7581 | [6] | CLIP (LADDER) | |
| 37. | 4P-8134 | [2] | CLIP (LADDER) | |
| 38. | 5G-3676 | [2] | GROMMET | |
| 39. | 6V-0894 | [1] | SEAL-O-RING | |
| 40. | 6V-2857 | [2] | GROMMET | |
| 41. | 6V-7357 M | [1] | BOLT (M6X1X25-MM) | |
| 42. | 5P-8939 | [2] | GROMMET | |
| 43. | 6W-6672 | [1] | SPACER (10.5X20X38-MM THK) | |
| 44. | 7X-2536 M | [1] | BOLT (M8X1.25X14-MM) | |
| 45. | 8T-4121 | [39] | WASHER-HARD (11X21X2.5-MM THK) | |
| 46. | 8T-4136 M | [16] | BOLT (M10X1.5X25-MM) | |
| 47. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 48. | 8T-5005 M | [1] | BOLT (M10X1.5X70-MM) | |
| 49. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 50. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 51. | 8T-2920 | [2] | GROMMET (27-MM ID) | |
| 52. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 53. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 54. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 55. | 101-3129 M | [1] | STUD (M10X1.5-THD) | |
| 56. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| 57. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| 58. | 505-7638 | [1] | PLUG AS-CONNECTOR | |
| 169-0705 | [2] | SEAL | ||
| 490-0578 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Caterpillar Parts SIS Catalog 120 :
Truck sale:
Caterpillar LIFT TRUCKS EJE120E, Misc Forklifts, Material handling equipment
- Misc Forklifts
MADISA
- Misc Forklifts
MADISA