AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

460-9012 PUMP GP-PISTON -PROPEL S/N AK51-UP PART OF 374-1304 PUMP & MTG GP-PISTON, 374-1299 PUMP & MTG GP-PROPEL AN ATTACHMENT PM820


HYDRAULIC SYSTEM
PUMP GP
MOTOR GP
PUMP GP
TANK GP
VALVE GP

COLD PLANER PM820 COLD PLANER AK5
 PM820 Cold Planer AK500001-UP (MACHINE) POWERED BY C18 Engine M0100971 PM820 AK5   (2019)

HYDRAULIC SYSTEM

PUMP GP
PUMP GP-HYDRAULIC
449-9095 PUMP GP-HYDRAULIC
PUMP GP-PISTON
460-9011 PUMP GP-PISTON
PUMP GP-PISTON
460-9012 PUMP GP-PISTON
ROTATING GP-PUMP
251-1752 ROTATING GP-PUMP
ROTATING GP-PUMP
462-1137 ROTATING GP-PUMP
ROTATING GP-PUMP
469-2340 ROTATING GP-PUMP
 

#M01009710390
 

460-9012: PUMP GP-PISTON

460-9012 PUMP GP-PISTON -PROPEL
S/N AK51-UP
PART OF 374-1304 PUMP & MTG GP-PISTON, 374-1299 PUMP & MTG GP-PROPEL
AN ATTACHMENT
i07670056 M0100971
4609012 PUMP GP-PISTON Parts scheme 4609012 PUMP GP-PISTON Parts scheme 4609012 PUMP GP-PISTON Parts scheme 4609012 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your PM820 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 455-4866 [2] KIT-SERVO PISTON  
2. 455-4869 [2] BLOCK-SLIDER  
3. 341-7637 [2] KIT-BEARING  
    (INCLUDES PARTS MARKED 'N' IN THE GRAPHIC)
4. 457-5354 [2] SWASHPLATE  
5. 9S-8008 [2] PLUG (1-1/16-12-THD)  
6. 3D-2824 [2] SEAL-O-RING  
7. 9S-8002 [6] PLUG (7/16-20-THD)  
8. 3J-7354 H [6] SEAL-O-RING  
9. 418-1418 [8] BOLT-FLANGE HEAD  
10. 455-4867 [4] KIT-SERVO CYLINDER  
11. 278-8747 [1] SHAFT-DRIVE  
12. 108-4578 X [2] BEARING-ROLLER  
13. 1J-6474 X [1] RING-RETAINING (EXTERNAL)  
14. 455-4868 [1] KIT-SHAFT SEAL  
15. 278-8739 [2] ROTATING GP-PUMP  
16. 456-5356 H [2] GASKET-END CAP  
17. 8J-8308 [2] PIN-ROLL  
18. 6V-3538 [4] DOWEL  
19. 116-2005 [4] KIT-VALVE PLUG  
    (ALSO INCLUDES O-RING SEALS)
20. 469-2337 [4] VALVE-RELIEF  
21. 217-3617 [4] SPRING  
22. 457-6559 T [1] VALVE GP-SOLENOID (CUTOFF VALVE)  
  457-6557 [1] COIL-SOLENOID  
  457-6561 M [1] NUT (M16X1-THD)  
23. 456-1389 [1] KIT-VALVE  
    (INCLUDES ADJUSTMENT, SPRINGS & POPPET)
24. 9S-8004 [7] PLUG (9/16-18-THD)  
25. 3J-1907 [7] SEAL-O-RING  
26. 278-8749 [1] PLATE (CW)  
28. 278-8750 [1] PLATE (CCW)  
29. 8T-0293 M [4] BOLT (M12X1.75X20-MM)  
30. 340-7078 [1] SEAL  
31. 8C-3413 M [6] BOLT-SOCKET HEAD (M12X1.75X120-MM)  
32. 260-3960 [4] DOWEL  
33. 418-1399 [2] LINK-FEEDBACK  
34. 351-6050 H [2] GASKET  
35. 311-0326 [2] VALVE GP-CONTROL (CONVEYOR PUMP)  
    (EACH INCLUDES)
  8C-6965 M [6] BOLT-SOCKET HEAD (M6X1X45-MM)  
  099-2374 M [6] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
  311-0327 [2] VALVE  
  311-8750 [1] SCREEN-FILTER (PISTON PUMP)  
37. 278-8748 [1] SHAFT-DRIVE  
38. 144-7338 H [4] SEAL-O-RING  
39. 2M-9780 H [1] SEAL-O-RING  
40. 6J-2244 H [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  456-4610 H [1] KIT-SEAL  
    (INCLUDES SEALS, O-RING SEALS, NUT, PISTON SEAL-RING, END CAP GASKET, LIP SEAL, BACK -UP RINGS
    GASKET , KIT SEALS & ALSO INCLUDES PARTS MARKED 'J' IN THE GRAPHIC)
  278-8742 X [1] KIT-BEARING  
    (ALSO INCLUDES PARTS MARKED 'V' IN THE GRAPHIC)
  373-1999 T [1] KIT-SEAL  
    (INCLUDES SEALS)
  H   KIT MARKED H SERVICES PARTS MARKED H)
  M   METRIC PART
  T   (KIT MARKED T SERVICES PARTS MARKED T)
  X   (KIT MARKED X SERVICES PARTS MARKED X)
 

#M01009710391
 

211-5205: ROTATING GP-MOTOR

211-5205 ROTATING GP-MOTOR
S/N AK51-UP
PART OF 382-5359 MOTOR GP-PISTON
AN ATTACHMENT
i07670273 M0100971
2115205 ROTATING GP-MOTOR Parts scheme
  For full view, you need register

Parts for your PM820 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 209-9964 B [1] SHIM (2.15-MM THK)  
  209-9965 B [1] SHIM (2.2-MM THK)  
  209-9966 B [1] SHIM (2.25-MM THK)  
  209-9967 B [1] SHIM (2.3-MM THK)  
  209-9971 B [1] SHIM (2.5-MM THK)  
2. 209-9975 [1] PIN-CENTER  
3. 6V-5201 [1] RING-RETAINING  
4. 103-8901 [1] LENS-CONTROL  
5. 180-1274 B [1] SPACER (5X15.4X3.8-MM THK)  
  180-1275 B [1] SPACER (5X15.4X3.9-MM THK)  
  180-1276 B [1] SPACER (5X15.4X4-MM THK)  
  180-1277 B [1] SPACER (5X15.4X3.7-MM THK)  
  180-1278 B [1] SPACER (5X15.4X3.6-MM THK)  
  180-1279 B [1] SPACER (5X15.4X3.5-MM THK)  
6. 252-0705 M [7] SCREW-PAN HEAD (M4X0.7X12-MM)  
7. 123-8905 [1] CONE-BEARING  
8. 123-8906 [1] CUP-TAPERED ROLLER  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  B   USE AS REQUIRED
  M   METRIC PART
 

#M01009710392
 

462-1146: ROTATING GP-MOTOR

462-1146 ROTATING GP-MOTOR
S/N AK51-UP
PART OF 499-8845 MOTOR GP-PISTON
AN ATTACHMENT
i05887185 M0100971
4621146 ROTATING GP-MOTOR Parts scheme
  For full view, you need register

Parts for your PM820 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4241 [1] RING-RETAINING  
2. 462-1147 [1] BARREL GP-MOTOR  
  9T-2559 [1] DISC-RETAINING  
  113-4417 M [7] SCREW (M6X1X16-MM)  
  123-3299 [1] PLATE-RETAINING  
  166-7410 [1] SPRING  
3. 133-8929 [1] BEARING AS  
4. 163-0682 [1] RING  
5. 141-0244 [1] BEARING AS  
6. 141-0235 B [1] SHIM (2.65-MM THK)  
  141-0236 B [1] SHIM (2.7-MM THK)  
  141-0237 B [1] SHIM (2.75-MM THK)  
  141-0238 B [1] SHIM (2.8-MM THK)  
  141-0239 B [1] SHIM (2.85-MM THK)  
  141-0240 B [1] SHIM (2.9-MM THK)  
  141-0241 B [1] SHIM (2.95-MM THK)  
  141-0224 B [1] SHIM (3-MM THK)  
  440-3455 B [1] SHIM (2.60-MM THK)  
  440-3456 B [1] SHIM (2.55-MM THK)  
  440-3457 B [1] SHIM (2.50-MM THK)  
  440-3473 B [1] SHIM (2.45-MM THK)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  B   USE AS REQUIRED
  M   METRIC PART
 

#M01009710393
 

251-1752: ROTATING GP-PUMP

251-1752 ROTATING GP-PUMP
S/N AK51-UP
PART OF 462-1137 ROTATING GP-PUMP
AN ATTACHMENT
i07307217 M0100971
2511752 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your PM820 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-7238 [9] PISTON  
2. 117-7249 [1] PLATE-RETAINER  
3. 117-7250 [1] RETAINER  
4. 117-7247 B [1] SHIM (0.8-MM THK)  
  117-7245 B [1] SHIM (1.2-MM THK)  
  117-7246 B [1] SHIM (1-MM THK)  
  117-7248 B [1] SHIM (0.6-MM THK)  
5. 126-8842 [1] RING-SNAP  
6. 122-9071 [1] SPRING  
7. 122-9070 [2] SHIM (3-MM THK)  
8. 117-7239 [1] SPRING SET  
9. 126-8899 [1] BARREL  
  B   USE AS REQUIRED
 

#M01009710394
 

462-1137: ROTATING GP-PUMP

462-1137 ROTATING GP-PUMP
S/N AK51-UP
PART OF 449-9095 PUMP GP-HYDRAULIC
AN ATTACHMENT
i07307161 M0100971
4621137 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your PM820 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 212-4483 [1] RING-RETAINING  
2. 194-1983 [1] SEAL-SHAFT  
3. 126-9587 [1] RING-RETAINING  
4. 126-8901 [1] SHAFT  
5. 117-7251 [1] BEARING  
6. 108-3565 [1] CLIP  
7. 125-9134 [1] BEARING AS  
8. 122-9068 [1] WIRE  
9. 340-5800 [1] BEARING AS-ROLLER  
10. 112-4657 [1] PIN  
11. 117-7240 [1] CRADLE  
12. 117-7241 [1] PLATE  
13. 1G-3410 [1] WIRE  
14. 251-1752 Y [1] ROTATING GP-PUMP  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  Y   SEPARATE ILLUSTRATION
 

#M01009710395
 

469-2340: ROTATING GP-PUMP

469-2340 ROTATING GP-PUMP
S/N AK51-UP
PART OF 460-9011 PUMP GP-PISTON
AN ATTACHMENT
i07546196 M0100971
4692340 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your PM820 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 168-3379 [3] PIN  
2. 279-2491 [1] PLATE-PORT  
3. 6V-7723 [1] RING-RETAINING  
4. 185-0292 [1] SPRING  
5. 168-3382 [1] WASHER (30X42X2.7-MM THK)  
6. 168-3378 [1] BEARING-SPHERICAL  
7. 168-3385 [1] PLATE-RETRACTION  
 

#M01009710396
 

507-6490: TANK & MTG GP-HYDRAULIC

507-6490 TANK & MTG GP-HYDRAULIC
S/N AK51-UP
PART OF 496-4965 HYDRAULIC AR
AN ATTACHMENT
i07669592 M0100971
5076490 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your PM820 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 377-9377 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
2. 377-9379 [1] BRACKET AS  
3. 511-0765 Y [1] TANK GP-HYDRAULIC  
4. 7X-7729 [4] WASHER (11X25X3-MM THK)  
5. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4123 [4] WASHER (22X35X3.5-MM THK)  
7. 8T-4133 M [2] NUT (M10X1.5-THD)  
8. 8T-4184 M [1] BOLT (M12X1.75X45-MM)  
9. 8T-4910 M [1] BOLT (M12X1.75X60-MM)  
10. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
11. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
12. 8T-4244 M [2] NUT (M12X1.75-THD)  
13. 8T-5460 M [4] BOLT (M20X2.5X40-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M01009710397
 

511-0765: TANK GP-HYDRAULIC

511-0765 TANK GP-HYDRAULIC
S/N AK51-UP
PART OF 507-6490 TANK & MTG GP-HYDRAULIC
AN ATTACHMENT
i07669633 M0100971
5110765 TANK GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your PM820 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-8937 [1] CAP AS-FILLER (LOCKABLE)  
2. 204-9815 [2] ELBOW AS  
    (EACH INCLUDES)
  6K-6307 [1] SEAL-O-RING  
  8T-0315 [1] SEAL-O-RING  
  8T-1682 [1] ELBOW  
3. 206-8818 [1] STRAINER  
4. 207-5997 [1] BREATHER AS (FAST FILL)  
5. 260-8636 [1] GAUGE-LIQUID LEVEL (SIGHT GLASS)  
6. 363-3445 [2] STRAINER AS  
    (EACH INCLUDES)
  030-4606 [1] SEAL-O-RING  
7. 366-4695 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  360-3679 [1] PLUG-CONNECTOR (9/16-18-THD)  
8. 372-6949 [1] GASKET  
9. 372-6996 [1] COVER AS  
10. 376-1286 Y [1] FILTER GP-OIL (HYDRAULIC TANK RETURN)  
11. 377-9629 [1] VALVE-BALL  
12. 386-6219 [1] ELBOW AS  
  7M-8485 [1] SEAL-O-RING  
  198-7655 [1] CONNECTOR  
13. 418-6597 [1] SWITCH GP-LIQUID LEVEL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
14. 511-0766 [1] TANK AS-HYDRAULIC  
15. 148-8335 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
16. 148-8345 [1] CONNECTOR AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8638 [1] CONNECTOR  
17. 148-8353 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-9001 [1] ELBOW  
18. 148-8355 [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9005 [1] ELBOW  
  7M-8485 [1] SEAL-O-RING  
19. 148-8390 [1] ELBOW AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8626 [1] ELBOW  
  7J-9108 [1] SEAL-O-RING  
20. [1] PLUG AS  
  3D-2824 [1] SEAL-O-RING  
  9S-4183 [1] PLUG (1-1/16-12-THD)  
21. 153-6237 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9004 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
22. 172-4620 [1] CONNECTOR AS  
  3D-2824 [2] SEAL-O-RING  
  6Y-2349 [1] CONNECTOR  
23. 204-9379 [1] ELBOW AS  
  6K-6307 [1] SEAL-O-RING  
  8T-0315 [1] SEAL-O-RING  
  204-9378 [1] ELBOW  
24. 2M-9780 [1] SEAL-O-RING  
25. 3D-2824 [1] SEAL-O-RING  
26. 5C-7261 M [14] NUT (M8X1.25-THD)  
27. 5P-4116 [14] WASHER-HARD (8.8X20.5X2-MM THK)  
28. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M01009710398
 

374-1327: VALVE & MOUNTING GP

374-1327 VALVE & MOUNTING GP -AUX POWER UNIT
S/N AK51-UP
PART OF 505-4574 HYDRAULIC AR-AUXILIARY
AN ATTACHMENT
i07670145 M0100971
3741327 VALVE & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your PM820 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-6035 [1] PIPE  
2. 167-1192 [2] CLIP  
3. 382-5411 Y [1] MANIFOLD GP-CONTROL  
4. 148-8325 [1] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8641 [1] CONNECTOR  
5. 148-8336 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
6. 148-8351 [2] ELBOW AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  6V-9849 [1] ELBOW  
8. 148-8390 [1] ELBOW AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8626 [1] ELBOW  
  7J-9108 [1] SEAL-O-RING  
9. 148-8443 [1] TEE AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  7X-2459 [1] ADAPTER-TEE  
10. 150-3033 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  8T-0164 [1] ELBOW  
11. 7I-2273 M [2] BOLT (M5X0.8X16-MM)  
12. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
13. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-6685 M [2] BOLT (M10X1.5X110-MM)  
15. 185-4026 [1] VALVE GP-CHECK  
16. 194-2903 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  8T-0119 [1] ELBOW  
17. 268-1559 [2] ADAPTER AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  209-0939 [1] ADAPTER  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M01009710399
 

374-1339: VALVE & MOUNTING GP

374-1339 VALVE & MOUNTING GP -FLOW CONTROL
S/N AK51-UP
PART OF 505-4574 HYDRAULIC AR-AUXILIARY
AN ATTACHMENT
i07670125 M0100971
3741339 VALVE & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your PM820 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 499-8838 [2] VALVE GP-FLOW CONTROL (FRONT)  
2. 395-0826 Y [1] VALVE GP-FLOW CONTROL (RIGHT SIDE, REAR)  
3. 395-0827 Y [1] VALVE GP-FLOW CONTROL (LEFT SIDE, REAR)  
4. 148-8336 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
5. 148-8340 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
6. 148-8353 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-9001 [1] ELBOW  
7. 148-8364 [4] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
8. 148-8378 [3] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
9. 151-6283 M [16] BOLT-SOCKET HEAD (M6X1X70-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications
Hydraulic Pump and Mounting
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems
Pump Rotating (Hydraulic Fan)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems
Pump Drive
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems
Systems Operation
Location of Components (Propel System)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems
Piston Pump (Propel)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems
Hydraulic Schematic (Propel System)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems
Piston Pump (Conveyor System)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System
Piston Pump (Fan Drive)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System
Reuse And Salvage Guidelines
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Testing and Adjusting
Propel Pump Pressure Override - Calibrate
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems
Case Drain Flow for Piston Motor (Propel) - Test
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems
Relief Valve (Charge) - Test - Conveyor
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System
Fan Pump - Test and Adjust
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System
Bench Test Procedures
Bench Test Procedure for Hydraulic Piston Pumps {1387, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {1387, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Disassembly and Assembly
Piston Pump (Hydraulic Fan) - Disassemble
PM820, PM822, and PM825 Cold Planer Machine Systems
Piston Pump (Hydraulic Fan) - Assemble
PM820, PM822, and PM825 Cold Planer Machine Systems
Pump Drive - Disassemble
PM820, PM822, and PM825 Cold Planer Machine Systems
Pump Drive - Assemble
PM820, PM822, and PM825 Cold Planer Machine Systems
Gear Pump (Charge) - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems
Gear Pump (Charge) - Disassemble
PM820, PM822, and PM825 Cold Planer Machine Systems
Gear Pump (Charge) - Assemble
PM820, PM822, and PM825 Cold Planer Machine Systems
Electric Drive Pump (Auxiliary) - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems
Pump Drive - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems
Piston Pump (Propel) - Disassemble
PM820, PM822, and PM825 Cold Planer Machine Systems
Piston Pump (Propel) - Assemble
PM820, PM822, and PM825 Cold Planer Machine Systems
Piston Pump (Hydraulic Fan) - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems
Piston Pump (Auxiliary) - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems
Piston Pump (Conveyor) - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems
Piston Pump (Propel) - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems
Piston Pump (Conveyor) - Disassemble
PM820, PM822, and PM825 Cold Planer Machine Systems
Piston Pump (Conveyor) - Assemble
PM820, PM822, and PM825 Cold Planer Machine Systems

Caterpillar Parts SIS Catalog PM820 :

PUMP GP-PISTON
460-9011 PUMP GP-PISTON
PUMP GP-HYDRAULIC
449-9095 PUMP GP-HYDRAULIC
PUMP & MTG GP-PISTON
374-1311 PUMP & MTG GP-PISTON
PUMP & MTG GP-PISTON
374-1305 PUMP & MTG GP-PISTON
PUMP & MTG GP-PISTON
374-1304 PUMP & MTG GP-PISTON
PUMP & MOUNTING GP
374-9535 PUMP & MOUNTING GP
PUMP & MOTOR GP-HYDRAULIC
1G-9813 PUMP & MOTOR GP-HYDRAULIC
MOTOR GP-PISTON
499-8845 MOTOR GP-PISTON
ROTATING GP-MOTOR
211-5205 ROTATING GP-MOTOR
ROTATING GP-MOTOR
462-1146 ROTATING GP-MOTOR
ROTATING GP-PUMP
251-1752 ROTATING GP-PUMP
ROTATING GP-PUMP
462-1137 ROTATING GP-PUMP
ROTATING GP-PUMP
469-2340 ROTATING GP-PUMP
TANK & MTG GP-HYDRAULIC
507-6490 TANK & MTG GP-HYDRAULIC
TANK GP-HYDRAULIC
511-0765 TANK GP-HYDRAULIC
VALVE & MOUNTING GP
374-1327 VALVE & MOUNTING GP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.