AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

464-2494 DOOR GP-ACCESS -LH S/N 8RF1-UP PART OF 561-7478 ENCLOSURE GP-ENGINE AN ATTACHMENT WEG GENERATOR


FRAME AND BODY
DOOR GP
ENCLOSURE GP
DEFLECTOR GP
FRAME GP

GENERATOR WEG GENERATOR 8RF
 PM620 Cold Planer 8RF00001-UP POWERED BY C18 Engine M0101114 WEG 8RF   (1986)

FRAME AND BODY

DOOR GP
DOOR GP-ACCESS
388-2204 DOOR GP-ACCESS
DOOR GP-ACCESS
464-2494 DOOR GP-ACCESS
 

#M01011140240
 

464-2494: DOOR GP-ACCESS

464-2494 DOOR GP-ACCESS -LH
S/N 8RF1-UP
PART OF 561-7478 ENCLOSURE GP-ENGINE
AN ATTACHMENT
i06213513 M0101114
4642494 DOOR GP-ACCESS Parts scheme 4642494 DOOR GP-ACCESS Parts scheme 4642494 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4136 M [26] BOLT (M10X1.5X25-MM)  
2. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
3. 8T-4195 M [5] BOLT (M10X1.5X30-MM)  
4. 8T-4189 M [22] BOLT (M8X1.25X20-MM)  
5. 3T-0852 M [3] LOCKNUT (M8X1.25-THD)  
6. 8T-4908 M [25] BOLT (M8X1.25X25-MM)  
7. 3B-4617 [2] PIN-COTTER  
8. 4I-3255 [4] NUT-PUSH ON  
9. 5C-2874 M [6] NUT (M5X0.8-THD)  
10. 5P-4116 [58] WASHER-HARD (8.8X20.5X2-MM THK)  
11. 6V-7357 M [2] BOLT (M6X1X25-MM)  
12. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
13. 8T-4121 [28] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4137 M [24] BOLT (M10X1.5X20-MM)  
15. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 8T-4224 [10] WASHER-HARD (8.8X16X2-MM THK)  
17. 464-2543 [1] BRACKET  
18. 8T-5447 [3] RING-RETAINING  
19. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
20. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
21. 108-7756 [2] ROD  
22. 111-1777 [11] BUMPER-RUBBER  
23. 129-3178 M [2] LOCKNUT (M6X1-THD)  
24. 222-5151 [2] PAWL  
25. 256-7669 [17] PLATE  
26. 256-7670 [1] SPACER (SPECIAL)  
27. 259-7000 [1] SPRING-GAS  
28. 286-9963 J [2] LATCH AS  
29. 289-5247 [1] CAM  
30. 289-5248 [1] CAM  
31. 305-3156 [1] PAWL  
32. 305-3169 [1] PAWL  
33. 326-0610 [2] LATCH AS  
    (EACH INCLUDES)
  1H-3244 [4] LOCKWASHER  
  096-6331 M [2] NUT (M12X1.75-THD)  
  326-0612 [2] WASHER-TAB  
  344-5673 M [4] NUT (M6X1-THD)  
34. 256-4000 [2] SPACER (SPECIAL)  
35. 333-6459 [2] BRACKET  
36. 344-5674 M [2] NUT (M8X1.25-THD)  
37. 344-5675 M [1] NUT (M10X1.5-THD)  
38. 387-9574 [1] DOOR AS (FUEL)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
39. 387-9576 [1] DOOR (FUEL FILL)  
40. 389-6955 J [2] LOCK AS  
41. 389-9524 [1] COVER  
42. 397-2993 [1] COVER  
43. 397-3626 [1] COVER  
44. 397-4849 [2] SPRING AS-GAS (DOOR)  
45. 397-4851 [1] PLATE  
46. 464-2498 [1] BOX AS  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
  7T-1099 [2] LINK  
  8T-3490 M [10] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [3] NUT-WELD (M8X1.25-THD)  
  8T-8874 M [2] NUT-WELD (M5X0.8-THD)  
  130-5300 [1] CLIP  
47. 398-6427 [1] BRACKET  
48. 464-2511 [1] PANEL AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
49. 464-2514 [1] DOOR AS  
  153-3723 [3] HINGE AS  
  8T-5447 [1] RING-RETAINING  
50. 464-2517 [1] PLATE AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  130-5300 [1] CLIP  
  315-4131 M [2] NUT-WELD (M10X1.5-THD)  
51. 464-2518 [1] BOX AS  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
  237-7506 [1] HOOK  
52. 464-2525 [1] DOOR (LH)  
53. 464-2529 [1] DOOR AS  
54. 464-2531 [1] COVER AS  
  7T-1099 [1] LINK  
  8T-3490 M [9] NUT-WELD (M10X1.5-THD)  
  315-4131 M [2] NUT-WELD (M10X1.5-THD)  
55. 464-2541 [1] DOOR (FRONT)  
56. 464-2542 [1] DOOR (REAR LOWER, LH)  
57. 464-9653 [1] PLATE AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
58. 486-2847 [1] STORAGE AS  
  7T-1099 [6] LINK  
  8T-3490 M [22] NUT-WELD (M10X1.5-THD)  
  130-5300 [2] CLIP  
59. 487-0658 [1] PANEL  
60. 552-9761 [1] GUARD AS-BELT  
61. 489-8228 [13] HINGE AS  
62. 161-7632 M [4] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
63. 6R-7943 M [6] SCREW (M5X0.8X15-MM)  
64. 7X-7729 [34] WASHER (11X25X3-MM THK)  
65. 342-6093 [3] STUD-BALL  
66. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
67. 8T-4200 M [12] BOLT (M8X1.25X16-MM)  
68. 126-8472 E SEAL (85-CM)  
69. 145-5664 E SEAL (92-CM)  
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#M01011140241
 

561-7478: ENCLOSURE GP-ENGINE

561-7478 ENCLOSURE GP-ENGINE
S/N 8RF1-UP
PART OF 558-4166 CHASSIS AR
AN ATTACHMENT
i07594104 M0101114
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  387-3204 Y [1] BUMPER GP-REAR  
  561-7469 Y [1] ENCLOSURE GP-FRONT  
  388-2204 Y [1] DOOR GP-ACCESS (RH)  
  464-2494 Y [1] DOOR GP-ACCESS (LH)  
  477-1940 Y [1] GRILL GP-RADIATOR  
  387-0352 Y [1] GUARD GP-BELT  
  386-9928 Y [1] GUARD GP-BOTTOM  
  507-0410 Y [1] HOOD GP  
  567-2095 Y [1] SUPPRESSION GP-SOUND  
  Y   SEPARATE ILLUSTRATION
 

#M01011140242
 

561-7469: ENCLOSURE GP-FRONT

561-7469 ENCLOSURE GP-FRONT
S/N 8RF1-UP
PART OF 561-7478 ENCLOSURE GP-ENGINE
AN ATTACHMENT
i07593991 M0101114
5617469 ENCLOSURE GP-FRONT Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4186 M [7] BOLT (M10X1.5X40-MM)  
2. 8T-4195 M [7] BOLT (M10X1.5X30-MM)  
3. 526-2589 [1] PLATE AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
4. 561-7393 [1] COVER  
5. 8T-4140 M [1] BOLT (M16X2X60-MM)  
6. 8T-4193 M [1] BOLT (M16X2X50-MM)  
7. 7X-7729 [9] WASHER (11X25X3-MM THK)  
8. 8T-4121 [27] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4136 M [22] BOLT (M10X1.5X25-MM)  
10. 271-1919 [4] WASHER (17X30X4-MM THK)  
11. 305-3169 [1] PAWL  
12. 326-0610 [1] LATCH AS  
  096-6331 M [2] NUT (M12X1.75-THD)  
  1H-3244 [4] LOCKWASHER  
  326-0612 [2] WASHER-TAB  
  344-5673 M [4] NUT (M6X1-THD)  
13. 342-6093 [1] STUD-BALL  
14. 383-3592 [1] DOOR AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
15. 383-8617 [1] HINGE AS  
16. 419-4141 [2] BRACKET  
17. 098-5747 M [3] NUT (M16X2-THD)  
18. 127-2909 M [4] SCREW-FLAT HEAD (M10X1.5X20-MM)  
19. 561-7409 [1] FRAME AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  7T-1099 [2] LINK  
  8T-3597 M [6] NUT-WELD (M12X1.75-THD)  
  8T-3612 M [5] NUT-WELD (M8X1.25-THD)  
  8T-8874 M [4] NUT-WELD (M5X0.8-THD)  
  178-8510 [1] PLATE-WELD  
  355-8941 M [3] NUT-WELD (M16X2-THD)  
20. 561-7466 [1] PLATE AS  
21. 562-6194 [1] PLATE AS  
22. 7X-2556 M [1] BOLT (M16X2X100-MM)  
23. 5P-7211 D SEAL (0.5-M)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#M01011140243
 

390-1875: FLASHING GP

390-1875 FLASHING GP
S/N 8RF1-UP
PART OF 374-1265 CONVEYOR AR
AN ATTACHMENT
i06214346 M0101114
3901875 FLASHING GP Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 386-1474 [7] PLATE-RETAINER  
2. 499-2412 [2] FLASHING (LH)  
3. 475-3720 [1] PLATE AS  
4. 499-2417 [2] PLATE-RETAINER  
5. 500-4804 [1] FLASHING (FRONT)  
6. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
7. 7X-7729 [22] WASHER (11X25X3-MM THK)  
8. 8T-0389 M [4] LOCKNUT (M10X1.5-THD)  
9. 8T-4195 M [34] BOLT (M10X1.5X30-MM)  
10. 8T-4186 M [4] BOLT (M10X1.5X40-MM)  
11. 8T-4222 [28] WASHER-PLATED (11X32X2.5-MM THK)  
12. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
   
    AVAILABLE REPAIR KIT(S):
  569-5420 Y [1] FLASHING GP  
  569-5421 Y [1] FLASHING GP  
  569-5422 Y [1] FLASHING GP  
  569-5424 Y [1] KIT-FEEDER CONVEYOR  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M01011140244
 

569-5420: FLASHING GP

569-5420 FLASHING GP -KIT
S/N 8RF1-UP
PART OF 390-1875 FLASHING GP
AN ATTACHMENT
i07505238 M0101114
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4195 M [14] BOLT (M10X1.5X30-MM)  
  8T-4196 M [4] BOLT (M10X1.5X35-MM)  
  500-4804 [1] FLASHING  
  8T-0389 M [6] LOCKNUT (M10X1.5-THD)  
  7X-7729 [16] WASHER (11X25X3-MM THK)  
  8T-4222 [8] WASHER-PLATED (11X32X2.5-MM THK)  
  M   METRIC PART
 

#M01011140245
 

569-5421: FLASHING GP

569-5421 FLASHING GP
S/N 8RF1-UP
PART OF 390-1875 FLASHING GP
AN ATTACHMENT
i07505237 M0101114
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4186 M [4] BOLT (M10X1.5X40-MM)  
  8T-4195 M [16] BOLT (M10X1.5X30-MM)  
  499-2412 [2] FLASHING  
  6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
  7X-7729 [4] WASHER (11X25X3-MM THK)  
  8T-4222 [20] WASHER-PLATED (11X32X2.5-MM THK)  
  M   METRIC PART
 

#M01011140246
 

569-5422: FLASHING GP

569-5422 FLASHING GP
S/N 8RF1-UP
PRIMARY CONVEYOR FLASHING SEAL KIT
PART OF 390-1875 FLASHING GP
AN ATTACHMENT
i07505236 M0101114
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4196 M [2] BOLT (M10X1.5X35-MM)  
  8T-0389 M [18] LOCKNUT (M10X1.5-THD)  
  499-2421 [2] SEAL  
  7X-7729 [18] WASHER (11X25X3-MM THK)  
  8T-4222 [2] WASHER-PLATED (11X32X2.5-MM THK)  
  M   METRIC PART
 

#M01011140247
 

558-4640: FRAME GP-MAIN

558-4640 FRAME GP-MAIN
S/N 8RF1-UP
PART OF 558-4166 CHASSIS AR
AN ATTACHMENT
i07593969 M0101114
5584640 FRAME GP-MAIN Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-9553 M [2] BOLT (M6X1X16-MM)  
2. 099-0492 M [2] LOCKNUT (M6X1-THD)  
3. 372-6956 [2] STRAINER (WATER TANK FILL)  
4. 377-9610 [4] ELBOW AS  
    (EACH INCLUDES)
  2S-4078 [1] SEAL-O-RING  
  8C-9022 [1] ELBOW  
5. 386-4205 [2] BEARING  
6. 386-9909 [2] GASKET  
7. 396-6533 [1] INSULATION-FRONT  
8. 399-8204 [1] GASKET  
9. 399-8207 [1] COVER-TANK  
10. 439-0550 M [8] BOLT-12 POINT HEAD (M16X2X80-MM)  
11. 467-8740 [2] SHAFT-PIVOT  
12. 485-7727 [1] BRACKET AS-MOUNTING  
13. 492-0876 M [8] BOLT-12 POINT HEAD (M16X2X70-MM)  
14. 501-8346 [1] PLATE  
15. 501-8347 [1] PLATE  
16. 515-2121 [2] INDICATOR-LEVEL  
17. 515-2122 [2] FLANGE  
18. 558-4638 [1] FRAME AS  
  7T-1099 [62] LINK  
  8T-3635 M [6] STUD-WELD (M12X1.75X34.93-MM)  
  8Y-4489 M [1] BOSS (M10X1.5-THD)  
19. 563-1195 [2] CAP  
    (EACH INCLUDES)
  380-5452 [1] CAP  
20. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
21. 6V-5219 M [6] BOLT (M8X1.25X40-MM)  
22. 7R-8578 [2] LANYARD  
23. 7X-2619 M [2] BOLT (M6X1X10-MM)  
24. 7X-7729 [16] WASHER (11X25X3-MM THK)  
25. 8C-7581 M [12] SCREW-MACHINE (M4X0.7X8-MM)  
26. 8T-4132 M [16] NUT (M16X2-THD)  
27. 8T-4196 M [16] BOLT (M10X1.5X35-MM)  
28. 9M-2904 [4] CLAMP-HOSE  
29. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
30. 9X-8257 [32] WASHER (17.5X30X3.5-MM THK)  
31. 389-5847 E HOSE (68-CM EACH)  
32. 7X-7877 E STRIP-EDGE (15.5-CM)  
32A. 7X-7877 E STRIP-EDGE (49.5-CM)  
32B. 7X-7877 E STRIP-EDGE (19-CM)  
32C. 7X-7877 E STRIP-EDGE (25-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#M01011140248
 

557-9946: FRAME GP-UNDERCARRIAGE

557-9946 FRAME GP-UNDERCARRIAGE -RH
S/N 8RF1-UP
PART OF 558-0029 UNDERCARRIAGE AR
AN ATTACHMENT
i07593438 M0101114
5579946 FRAME GP-UNDERCARRIAGE Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
2. 8T-4193 M [12] BOLT (M16X2X50-MM)  
3. 6V-4429 M [16] BOLT (M16X2X40-MM)  
4. 8T-0357 M [16] BOLT (M16X2X70-MM)  
5. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4122 [44] WASHER-HARD (17X32X3.5-MM THK)  
7. 528-6522 [1] COVER AS  
8. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
9. 198-4777 [4] WASHER-HARD (11X25X10-MM THK)  
10. 383-4240 [1] SPROCKET (17-TEETH)  
11. 385-9196 [2] PAD-WEAR  
12. 391-9998 [1] PLATE  
13. 227-6370 Y [1] PLANETARY GP-FINAL DRIVE  
14. 567-8554 Y [1] IDLER GP-FRONT  
15. 383-4238 Y [1] TRACK GP  
16. 497-8871 Y [4] ROLLER GP-TRACK-SINGLE FLANGE  
17. 111-1777 [3] BUMPER-RUBBER  
18. 557-9916 [1] FRAME AS-BEARING  
18A. 8E-9522 [2] BUSHING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M01011140249
 

558-0014: FRAME GP-UNDERCARRIAGE

558-0014 FRAME GP-UNDERCARRIAGE -LH
S/N 8RF1-UP
PART OF 558-0029 UNDERCARRIAGE AR
AN ATTACHMENT
i07593439 M0101114
5580014 FRAME GP-UNDERCARRIAGE Parts scheme
  For full view, you need register

Parts for your WEG GENERATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
2. 8T-4193 M [12] BOLT (M16X2X50-MM)  
3. 6V-4429 M [16] BOLT (M16X2X40-MM)  
4. 8T-0357 M [16] BOLT (M16X2X70-MM)  
5. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4122 [44] WASHER-HARD (17X32X3.5-MM THK)  
7. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
8. 515-1010 [1] COVER AS  
9. 198-4777 [4] WASHER-HARD (11X25X10-MM THK)  
10. 383-4240 [1] SPROCKET (17-TEETH)  
11. 385-9196 [2] PAD-WEAR  
12. 391-9998 [1] PLATE  
13. 227-6370 Y [1] PLANETARY GP-FINAL DRIVE  
14. 567-8554 Y [1] IDLER GP-FRONT  
15. 383-4238 Y [1] TRACK GP  
16. 497-8871 Y [4] ROLLER GP-TRACK-SINGLE FLANGE  
17. 111-1777 [3] BUMPER-RUBBER  
18. 558-0010 [1] FRAME AS-BEARING  
18A. 8E-9522 [2] BUSHING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Access Doors and Covers
PM620 and PM622 Cold Planer
Specifications
Access Door
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems
Disassembly and Assembly
Access Door - Remove and Install - Rotor Chamber
PM620 and PM622 Cold Planer Machine Systems

Caterpillar Parts SIS Catalog WEG :

DOOR GP-ACCESS
388-2204 DOOR GP-ACCESS
COVER GP-REAR
391-6940 COVER GP-REAR
COVER GP-ACCESS
519-7351 COVER GP-ACCESS
COVER GP-ACCESS
418-2294 COVER GP-ACCESS
COVER GP-ACCESS
378-8246 COVER GP-ACCESS
COVER GP-ACCESS
376-4122 COVER GP-ACCESS
BUMPER GP-REAR
387-3204 BUMPER GP-REAR
BRACKET GP-MOUNTING
353-3915 BRACKET GP-MOUNTING
561-7478 ENCLOSURE GP-ENGINE
ENCLOSURE GP-FRONT
561-7469 ENCLOSURE GP-FRONT
FLASHING GP
390-1875 FLASHING GP
569-5420 FLASHING GP
569-5421 FLASHING GP
569-5422 FLASHING GP
FRAME GP-MAIN
558-4640 FRAME GP-MAIN
FRAME GP-UNDERCARRIAGE
557-9946 FRAME GP-UNDERCARRIAGE
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.