ELECTRICAL AND STARTING SYSTEM
SENSOR GPELECTRICAL AND STARTING SYSTEM
SENSOR GP
#M01017690330
490-2768: SENSOR & MTG GP-POSITION
490-2768 SENSOR & MTG GP-POSITION -GRADE CONTROL, BOOM
S/N LKG1-UP
PART OF 522-0438, 522-0440, 522-0442 GRADE CONTROL AR
S/N LKG1-UP
PART OF 522-0438, 522-0440, 522-0442 GRADE CONTROL AR
For full view, you need register
#M01017690331
490-2769: SENSOR & MTG GP-POSITION
490-2769 SENSOR & MTG GP-POSITION -GRADE CONTROL, STICK
S/N LKG1-UP
PART OF 522-0444, 522-0447, 522-0449, 522-0455, 522-0457 GRADE CONTROL AR
S/N LKG1-UP
PART OF 522-0444, 522-0447, 522-0449, 522-0455, 522-0457 GRADE CONTROL AR
For full view, you need register
#M01017690332
511-9451: SENSOR & MTG GP-POSITION
511-9451 SENSOR & MTG GP-POSITION -BODY TILT
S/N LKG1-UP
PART OF 522-3624, 522-3625 GRADE CONTROL AR
S/N LKG1-UP
PART OF 522-3624, 522-3625 GRADE CONTROL AR
For full view, you need register
Parts for your 349 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 150-5785 | [2] | DOWEL | |
| 2. | 554-8937 | [1] | CONTROL GP-ELECTRONIC | |
| 552-3289 | [1] | PAD | ||
| 3. | 563-0598 | [1] | SENSOR AS-POSITION (INERTIAL MEASUREMENT UNIT) | |
| 4. | 525-6177 | [1] | BRACKET-SENSOR | |
| 5. | 105-3482 M | [4] | BOLT-SOCKET HEAD (M8X1.25X16-MM) | |
| 6. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 8. | 8T-4224 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 8T-7547 M | [3] | BOLT (M8X1.25X30-MM) | |
| M | METRIC PART | |||
#M01017690333
522-0445: SENSOR & MTG GP-POSITION
522-0445 SENSOR & MTG GP-POSITION -GRADE CONTROL, BUCKET
S/N LKG1-UP
PART OF 522-0447, 522-0449, 522-0455, 522-0457 GRADE CONTROL AR
S/N LKG1-UP
PART OF 522-0447, 522-0449, 522-0455, 522-0457 GRADE CONTROL AR
For full view, you need register
Parts for your 349 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [20] | STRAP-CABLE | |
| 2. | 478-4873 | [1] | SENSOR-POSITION (BUCKET) | |
| 3. | 478-4876 | [1] | SENSOR GP-POSITION (BUCKET) | |
| 230-4014 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 4. | 506-6195 | [1] | COVER AS | |
| 7T-1099 | [2] | LINK | ||
| 5. | 136-4192 M | [5] | BOLT (M6X1X35-MM) | |
| 6. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 8. | 8T-4189 M | [3] | BOLT (M8X1.25X20-MM) | |
| 9. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 10. | 8T-4222 | [4] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 11. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 9X-8256 | [5] | WASHER (6.6X12X2-MM THK) | |
| 13. | 3E-6600 E | SEAL (1.5-CM EACH) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#M01017690334
563-0600: SENSOR & MTG GP-POSITION
563-0600 SENSOR & MTG GP-POSITION -GRADE CONTROL, BUCKET
S/N LKG1-UP
PART OF 522-0444 GRADE CONTROL AR
S/N LKG1-UP
PART OF 522-0444 GRADE CONTROL AR
For full view, you need register
Parts for your 349 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 2. | 8T-4189 M | [3] | BOLT (M8X1.25X20-MM) | |
| 3. | 136-4192 M | [5] | BOLT (M6X1X35-MM) | |
| 4. | 3S-2093 | [22] | STRAP-CABLE | |
| 5. | 478-4873 | [1] | SENSOR-POSITION (BUCKET) | |
| 6. | 478-4876 | [1] | SENSOR GP-POSITION (BUCKET) | |
| 230-4014 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 7. | 575-1483 | [1] | COVER AS-ACCESS | |
| 8. | 575-4554 | [3] | PLATE | |
| 9. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 11. | 8T-4222 | [4] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 12. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 9X-8256 | [5] | WASHER (6.6X12X2-MM THK) | |
| 14. | 3E-6600 E | SEAL (1.5-CM EACH) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#M01017690335
519-3848: SENSOR & MTG GP-PRESSURE
519-3848 SENSOR & MTG GP-PRESSURE
S/N LKG1-UP
PART OF 545-5454 MODULE AR-CLEAN EMISSIONS
S/N LKG1-UP
PART OF 545-5454 MODULE AR-CLEAN EMISSIONS
For full view, you need register
Parts for your 349 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0472 | [2] | ADAPTER | |
| 2. | 428-8808 | [4] | CLAMP-HOSE | |
| 3. | 501-2207 | [1] | SENSOR GP-PRESSURE (DPF DIFFERENTIAL) | |
| 4. | 512-7626 | [2] | HOSE-MOLDED | |
| 5. | 519-3849 | [1] | BRACKET AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 6. | 519-3850 | [1] | TUBE AS | |
| 7. | 519-3851 | [1] | TUBE AS | |
| 8. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| 9. | 7X-2533 M | [2] | BOLT (M6X1X35-MM) | |
| 10. | 6V-7357 M | [4] | BOLT (M6X1X25-MM) | |
| 11. | 7W-3556 | [2] | WASHER (14.27X20.57X1.5-MM THK) | |
| M | METRIC PART | |||
#M01017690336
521-6370: SENSOR & MTG GP-SOOT
521-6370 SENSOR & MTG GP-SOOT
S/N LKG1-UP
PART OF 521-6360 INSTALLATION AR-ENGINE
S/N LKG1-UP
PART OF 521-6360 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 349 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 2. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 3. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 4. | 8T-4138 M | [9] | BOLT (M6X1X20-MM) | |
| 5. | 9X-8256 | [9] | WASHER (6.6X12X2-MM THK) | |
| 6. | 285-6393 | [2] | CLIP | |
| 7. | 505-3153 | [2] | BELL-END | |
| 8. | 326-4516 | [12] | TIE-CABLE | |
| 9. | 441-5127 | [1] | SENSOR AS-NITROGEN OXIDE (ENGINE OUTPUT) | |
| 10. | 441-5128 | [1] | SENSOR AS-NITROGEN OXIDE (EXHAUST PIPE OUT) | |
| 11. | 522-2629 | [1] | PLATE AS | |
| 12. | 567-5625 | [1] | PLATE AS | |
| (EACH PLATE AS INCLUDES) | ||||
| 6V-9632 M | [3] | NUT-WELD (M6X1-THD) | ||
| 13. | 568-2887 | [1] | PLATE | |
| M | METRIC PART | |||
#M01017690337
518-5105: SENSOR GP-ENGINE
For full view, you need register
Parts for your 349 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 234-5012 Y | [1] | SENSOR GP-TEMPERATURE (COOLANT) | |
| 3. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (CHARGE AIR) | |
| 4. | 300-9806 Y | [1] | SENSOR GP-SPEED (CAMSHAFT) | |
| 5. | 325-7471 Y | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
| 6. | 330-9740 | [1] | ADAPTER AS | |
| 214-7566 | [1] | SEAL-O-RING | ||
| 330-9739 | [1] | ADAPTER | ||
| 7. | 331-1134 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
| 8. | 331-1135 Y | [1] | SENSOR GP-PRESSURE (INTAKE AIR MANIFOLD) | |
| 9. | 332-0296 Y | [1] | SENSOR GP-PRESSURE | |
| 10. | 474-3231 | [1] | SENSOR AS-TEMPERATURE (EGR) | |
| 281-8802 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 11. | 371-7161 | [1] | ADAPTER AS | |
| 214-7566 | [1] | SEAL-O-RING | ||
| 353-5439 | [1] | CONNECTOR | ||
| 12. | 384-1836 Y | [1] | SENSOR GP-SPEED (CRANKSHAFT) | |
| 13. | 385-1173 Y | [1] | SENSOR GP-PRESSURE (NRS DIFFERENTIAL) | |
| 14. | 421-8565 | [1] | BRACKET | |
| 15. | 443-4151 | [1] | BRACKET | |
| 16. | 132-5789 | [1] | CLIP (LADDER) | |
| 17. | 178-1781 | [1] | CLIP | |
| 18. | 183-3407 | [1] | PLUG AS (INTERNAL) | |
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 19. | 228-7100 | [1] | SEAL-O-RING | |
| 20. | 2Y-5829 M | [1] | NUT (M10X1.5-THD) | |
| 21. | 307-2673 | [1] | PLUG AS (INTERNAL) | |
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 22. | 6V-3940 M | [3] | BOLT (M8X1.25X25-MM) | |
| 23. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 24. | 7W-9094 | [1] | SPACER (11X20X9-MM THK) | |
| 25. | 8T-4970 M | [1] | BOLT (M6X1X14-MM) | |
| 26. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 27. | 9X-6165 | [1] | WASHER (6.5X22X2.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M01017690338
423-6434: SENSOR GP-LIQUID LEVEL
For full view, you need register
#M01017690339
525-9605: SENSOR GP-MACHINE LEVEL
525-9605 SENSOR GP-MACHINE LEVEL
S/N LKG1-UP
S/N LKG1-UP
For full view, you need register
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Special Instruction
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Systems Operation
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Troubleshooting
Disassembly and Assembly
