ELECTRICAL AND STARTING SYSTEM
CAMERA GPIGNITION GP
ELECTRONICS GP-COMMUNICATION
CONTROL GP-ELECTRONIC
ELECTRICAL AND STARTING SYSTEM
CAMERA GP
#M01017790200
545-8181: CAMERA & MOUNTING GP
545-8181 CAMERA & MOUNTING GP -RIGHT SIDE
S/N MGR1-UP
PART OF 522-3148, 522-3150, 566-4506 CAMERA AR
S/N MGR1-UP
PART OF 522-3148, 522-3150, 566-4506 CAMERA AR
For full view, you need register
Parts for your 352 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-4313 M | [4] | SCREW-BUTTON HEAD (M4X0.7X8-MM) | |
| 2. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 3. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 4. | 488-5838 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 5. | 529-7073 | [1] | COVER | |
| 6. | 488-9163 | [1] | CAMERA GP (12-VOLT) | |
| 490-0572 | [1] | RECEPTACLE AS (2-PIN) | ||
| 490-0582 | [1] | RECEPTACLE AS (2-PIN) | ||
| 7. | 554-3513 | [1] | BRACKET AS | |
| M | METRIC PART | |||
#M01017790201
554-3616: CAMERA & MOUNTING GP
554-3616 CAMERA & MOUNTING GP -FRONT GUARD
S/N MGR1-UP
PART OF 566-4506 CAMERA AR
S/N MGR1-UP
PART OF 566-4506 CAMERA AR
For full view, you need register
Parts for your 352 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-4313 M | [2] | SCREW-BUTTON HEAD (M4X0.7X8-MM) | |
| 2. | 488-5838 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
| 3. | 484-1456 | [2] | STRAP-CABLE | |
| 4. | 512-6385 | [1] | CAMERA GP | |
| 490-0572 | [1] | RECEPTACLE AS (2-PIN) | ||
| 490-0582 | [1] | RECEPTACLE AS (2-PIN) | ||
| 5. | 539-2833 | [1] | HARNESS AS-BOX | |
| 490-0571 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 490-0572 | [1] | RECEPTACLE AS (2-PIN) | ||
| 6. | 539-2834 | [1] | HARNESS AS-MONITOR | |
| 490-0578 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 490-0582 | [1] | RECEPTACLE AS (2-PIN) | ||
| 7. | 539-2835 | [1] | BRACKET | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| M | METRIC PART | |||
#M01017790202
522-3148: CAMERA AR
522-3148 CAMERA AR -RIGHT, REAR
S/N MGR1-UP
S/N MGR1-UP
For full view, you need register
Parts for your 352 EXCAVATOR:
CATERPILLAR SIS#M01017790203
522-3150: CAMERA AR
522-3150 CAMERA AR -360 VISIBILITY
S/N MGR1-UP
PART OF 558-2833, 558-2834, 558-2835, 558-2840 DISTRIBUTION AR
S/N MGR1-UP
PART OF 558-2833, 558-2834, 558-2835, 558-2840 DISTRIBUTION AR
For full view, you need register
Parts for your 352 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 502-7171 Y | [1] | CAMERA & MOUNTING GP (REAR VIEW) | ||
| 502-7174 Y | [1] | CAMERA & MOUNTING GP (FRONT) | ||
| 522-0422 Y | [1] | CAMERA & MOUNTING GP (LH) | ||
| 545-8181 Y | [1] | CAMERA & MOUNTING GP (RH) | ||
| 528-3542 Y | [1] | COVER GP-SOUND SUPPRESSION | ||
| 528-3548 Y | [1] | HOOD & GUARD GP | ||
| 522-0420 Y | [1] | WIRING GP-CHASSIS (CAMERA, RH) | ||
| 522-0423 Y | [1] | WIRING GP-CHASSIS (CAMERA, LH) | ||
| Y | SEPARATE ILLUSTRATION | |||
#M01017790204
566-4506: CAMERA AR
For full view, you need register
Parts for your 352 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 502-7171 Y | [1] | CAMERA & MOUNTING GP (REAR VIEW) | ||
| 554-3616 Y | [1] | CAMERA & MOUNTING GP (LED, FRONT GUARD) | ||
| 528-3542 Y | [1] | COVER GP-SOUND SUPPRESSION | ||
| 528-3548 Y | [1] | HOOD & GUARD GP | ||
| 522-0422 Y | [1] | CAMERA & MOUNTING GP | ||
| 545-8181 Y | [1] | CAMERA & MOUNTING GP | ||
| 522-0420 Y | [1] | WIRING GP-CHASSIS (CAMERA, RH) | ||
| 522-0423 Y | [1] | WIRING GP-CHASSIS (CAMERA, LH) | ||
| Y | SEPARATE ILLUSTRATION | |||
#M01017790205
343-3872: COIL GP-IGNITION
343-3872 COIL GP-IGNITION -AFTERTREATMENT REGEN DEVICE
S/N MGR1-UP
PART OF 545-5454 MODULE AR-CLEAN EMISSIONS
S/N MGR1-UP
PART OF 545-5454 MODULE AR-CLEAN EMISSIONS
For full view, you need register
Parts for your 352 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 296-7724 | [1] | COIL GP-IGNITION (AFTERTREATMENT REGEN DEVICE) | |
| 9X-1813 E | SLEEVE (30-CM) | |||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4014 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 2. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 3. | 7X-2534 M | [4] | BOLT (M6X1X50-MM) | |
| 4. | 346-9086 | [4] | SPACER (8.8X21X30-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#M01017790206
488-6819: CONTROL & MTG GP-COMMUNICATION
488-6819 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK
S/N MGR1-UP
PART OF 492-2913, 492-2915 INSTALLATION AR-COMMUNICATION
S/N MGR1-UP
PART OF 492-2913, 492-2915 INSTALLATION AR-COMMUNICATION
For full view, you need register
Parts for your 352 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-5607 | [8] | MOUNT-ISOLATION | |
| 2. | 494-6472 | [1] | CONTROL GP-COMMUNICATION (ELECTRONIC) | |
| 7X-6315 | [1] | STRAP AS-GROUND | ||
| 5P-6006 D | TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M) | |||
| 2L-8078 | [1] | TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW) | ||
| 2L-8075 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 3. | 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | |
| 4. | 8C-8451 M | [4] | BOLT (M6X1X40-MM) | |
| 5. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| 6. | 526-1028 | [1] | PLUG AS-CONNECTOR | |
| 483-2761 | [1] | PLUG AS-CONNECTOR (44-PIN) | ||
| 483-2768 | [44] | PLUG-SEAL | ||
| 7. | 483-2777 | [1] | COVER-CONNECTOR | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#M01017790207
488-6820: CONTROL & MTG GP-COMMUNICATION
488-6820 CONTROL & MTG GP-COMMUNICATION
S/N MGR1-UP
PRODUCT LINK 641 CELLULAR RADIO
PART OF 492-2915, 506-7024 INSTALLATION AR-COMMUNICATION
S/N MGR1-UP
PRODUCT LINK 641 CELLULAR RADIO
PART OF 492-2915, 506-7024 INSTALLATION AR-COMMUNICATION
For full view, you need register
Parts for your 352 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 440-2105 Y | [1] | CONTROL GP-UNPROGRAMMED (PRODUCT LINK ELITE 641 CELLULAR) | |
| 2. | 495-9813 | [1] | BRACKET AS | |
| 3. | 7X-2621 M | [2] | BOLT (M10X1.5X12-MM) | |
| 4. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 6. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M01017790208
488-6822: CONTROL & MTG GP-COMMUNICATION
488-6822 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK 631 SATELLITE
S/N MGR1-UP
PART OF 492-2913, 506-7022 INSTALLATION AR-COMMUNICATION
S/N MGR1-UP
PART OF 492-2913, 506-7022 INSTALLATION AR-COMMUNICATION
For full view, you need register
Parts for your 352 EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 544-1881 Y | [1] | CONTROL GP-UNPROGRAMMED (PRODUCT LINK 631 SATELLITE) | |
| 2. | 495-9813 | [1] | BRACKET AS | |
| 3. | 7X-2621 M | [2] | BOLT (M10X1.5X12-MM) | |
| 4. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 6. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M01017790209
502-7159: CONTROL & MTG GP-ELECTRONIC
502-7159 CONTROL & MTG GP-ELECTRONIC -BODY
S/N MGR1-UP
PART OF 489-7847 MODULE GP-CAB WIRING
S/N MGR1-UP
PART OF 489-7847 MODULE GP-CAB WIRING
For full view, you need register
Parts for your 352 EXCAVATOR:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
CAMERA GP
Operation and Maintenance Manual
Technical Information Bulletin
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
