ELECTRICAL SYSTEM
INSTALLATION GPELECTRONICS GP
ELECTRICAL AND STARTING SYSTEM
INSTALLATION GPSERVICE EQUIPMENT AND SUPPLIES
PARTS GP-MISCELLANEOUSELECTRICAL SYSTEM
ELECTRONICS GPSWITCH GP
WIRING GP
ELECTRICAL SYSTEM
INSTALLATION GP
#M01028060010
505-1734: INSTALLATION AR-FIELD
505-1734 INSTALLATION AR-FIELD
For full view, you need register
#M01028060011
505-1733: INSTALLATION GP-COMMUNICATION
505-1733 INSTALLATION GP-COMMUNICATION
For full view, you need register
Parts for your - MINESTAR EDGE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 B | [15] | STRAP-CABLE | |
| 2. | 7K-1181 B | [20] | STRAP-CABLE | |
| 3. | 151-6320 | [1] | TOOL-WIRE REMOVAL | |
| 4. | 355-2848 | [1] | TOOL-REMOVAL | |
| 5. | 053-2171 | [1] | GROMMET | |
| 6. | 137-9199 | [1] | GROMMET | |
| 7. | 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | |
| 8. | 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | |
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE(S) & INTERFACE SEAL) | ||||
| 9. | 190-7614 | [2] | KIT-RECEPTACLE (12-PIN) | |
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 483-3663 | [1] | CONTROL GP-ELECTRONIC (PL671) | |
| 11. | 331-4222 | [2] | KIT-CONNECTING PLUG (12-PIN) | |
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 12. | 102-8802 | [3] | KIT-RECEPTACLE (2-PIN) | |
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 13. | 518-1412 Y | [1] | HARNESS AS-POWER (KEY SWITCH) | |
| 14. | 529-4071 Y | [1] | HARNESS AS-CONTROL (MAIN) | |
| 15. | 2L-8079 | [3] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | |
| 16. | 102-8803 | [3] | KIT-RECEPTACLE (3-PIN) | |
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 17. | 385-8202 | [1] | CAP AS-CONNECTOR | |
| 18. | 453-9923 | [1] | RELAY AS (12-VOLT)(COMMUNICATION) | |
| 19. | 453-9924 | [1] | RELAY AS (24-VOLT)(COMMUNICATION) | |
| 20. | 490-0590 | [2] | CAP-RECEPTACLE | |
| 21. | 529-4070 Y | [1] | HARNESS AS-WIRING (ALARM) | |
| 22. | 529-4073 Y | [1] | HARNESS AS-WIRING (PROXIMITY) | |
| 23. | 549-3599 Y | [2] | HARNESS AS-MONITOR (PROXIMITY) | |
| 24. | 8T-8737 | [51] | PLUG-SEAL | |
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#M01028060012
505-1730: INSTALLATION GP-FIELD
505-1730 INSTALLATION GP-FIELD
HANDRAIL
HANDRAIL
For full view, you need register
Parts for your - MINESTAR EDGE:
CATERPILLAR SIS#M01028060013
561-9417: KIT-ANTENNA
561-9417 KIT-ANTENNA
For full view, you need register
Parts for your - MINESTAR EDGE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 198-4775 | [4] | WASHER-HARD (6.6X15X6-MM THK) | |
| 2. | 344-5673 M | [4] | NUT (M6X1-THD) | |
| 3. | 371-2200 | [1] | BRACKET-MOUNTING (ANTENNA) | |
| 4. | 372-4806 | [1] | ANTENNA (GPS) | |
| 5. | 435-7022 | [2] | PLATE-COVER | |
| 6. | 463-1122 | [2] | CLAMP | |
| 7. | 516-1632 | [1] | CABLE AS | |
| 8. | 7X-7888 M | [4] | BOLT (M6X1X90-MM) | |
| 9. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#M01028060014
505-1729: KIT-INSTALLATION
505-1729 KIT-INSTALLATION
MAGNET
MAGNET
For full view, you need register
#M01028060015
348-2154: MOUNTING GP-ELECTRONIC CONTROL
348-2154 MOUNTING GP-ELECTRONIC CONTROL -ECM
PART OF 485-2735 WIRING GP-MACHINE
AN ATTACHMENT
PART OF 485-2735 WIRING GP-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your - MINESTAR EDGE:
CATERPILLAR SIS#M01028060016
558-2971: SWITCH AS-LIMIT
For full view, you need register
Parts for your - MINESTAR EDGE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | |
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 2. | 274-3780 | [1] | CAP-SEAL | |
| 3. | 8C-5681 | [1] | SWITCH AS-LIMIT (BODY UP) | |
| 8C-9676 | [1] | HEAD-SWITCH ACTUATOR | ||
| 4. | 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | |
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 5. | 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| -OR- | ||||
| 126-1768 F | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| F | NOT SHOWN | |||
#M01028060017
485-2735: WIRING GP-MACHINE
485-2735 WIRING GP-MACHINE -PRODUCT LINK ELITE
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your - MINESTAR EDGE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 459-0786 Y | [1] | CONTROL GP-COMMUNICATION (NETWORK MANAGER) | ||
| 544-1441 Y | [1] | HARNESS AS-CONTROL | ||
| 348-2154 Y | [1] | MOUNTING GP-ELECTRONIC CONTROL (ECM) | ||
| 448-9960 Y | [1] | ADAPTER GP-COMMUNICATION | ||
| 435-9854 | [1] | ADAPTER-SEAL (PLUG) | ||
| 343-8444 | [1] | HARNESS AS-WIRING (BREAKOUT) | ||
| 2L-8075 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 115-2184 | [1] | CONNECTOR | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 447-5621 | [1] | FILM-IDENTIFICATION (REGULATORY COMPLIANCE MARK) | ||
| 433-9728 | [1] | FILM-WARNING (EXPLOSION, WIRELESS, OMM, U.S.) | ||
| 433-9730 | [1] | FILM-WARNING (EXPLOSION, WIRELESS, OMM, INTL) | ||
| 7K-1181 | [10] | STRAP-CABLE | ||
| E | ORDER BY THE CENTIMETER | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
