MACHINE GP 1502568 - Caterpillar

Illustration 1 g00949067
The service information number plate is located on the right side of the main frame behind the lift cylinder bracket.Service Information Number Plate (SIN) Machine PIN ____________________Engine Serial Number ____________________Transmission Serial Number ____________________If the machine is equipped with the optional plate for the European Union, this plate will be attached to plate (1). This plate will contain the following information:
Power (kW) ____________________
Weight (kg) ____________________
Year of Manufacture
Illustration 2 g00949149
Transmission Serial Number ____________________
Illustration 3 g00986540
Engine Serial Number ____________________Certification
ROPS/FOPS Plate
This message is positioned on the ROPS on the left side of the machine above the door.
Illustration 4 g00910837
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification plate.Sound
Illustration 5 g00914027
If equipped, this film is located on the ROPS support assembly to the left of the operator.
Illustration 6 g00933634
A typical example of this film is shown. Your machine may have a different value.If equipped, the certification film is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the film indicates the guaranteed sound power level LWA at the time of manufacture for the conditions that are specified in "2000/14/EC".Italian Roading Homologation
If equipped, this plate is located in a visible area on the machine that is specified by local regulations.
Illustration 7 g00937218
The following information is stamped on the tuv/homologation plate:
"Model" ____________________
"Homologation number" ____________________
"PIN" ____________________
"Allowed total weight" ____________________
"Allowed front axle weight" ____________________
"Allowed rear axle weight" ____________________
"Permissible towable mass" ____________________
"Unbraked towable mass" ____________________
"Independently-braked towable mass" ____________________
"Inertia-braked towable mass" ____________________
"Towable mass fitted with an assisted braking system (hydraulic or pneumatic)"____________________