MAGNET 5473301 - Caterpillar

Illustration 3 g06100286
View A-A
(C) Existing drain line
Disconnect existing drain line (C) from the fitting in the left stick lock valve. Save the parts. Leave the fitting in the valve.
Illustration 4 g06100290
View A-A
(1) 8T-7909 Adapter
(2) 6V-0405 Bonded Seal
Attach adapter (1) with bonded seal (2) to the right stick cylinder lock check valve in the location of previous purge valve, existing hardware (B), as saved in Step 1. Tighten adapter (1) to 10 2 N m (89 18 lb in).
Illustration 5 g06100611
View A-A
(3) 135-9941 Adapter
(4) 3J-7354 O-Ring Seal
Attach adapter (3) with O-ring seal (4) to previously installed adapter (3). Using a backing wrench to prevent adapter (3) from moving, tighten the jam nut of adapter (3) to 30 5 N m (266 44 lb in).
Illustration 6 g06100317
View A-A
(3) 135-9941 Adapter
(5) 3J-1907 O-Ring Seal
(6) 335-4000 Adapter
Attach adapter (6) with O-ring seal (5) to previously installed adapter (3). Using a backing wrench to prevent adapter (3) from moving, tighten adapter (6) to 55 8 N m (41 6 lb ft).
Illustration 7 g06100396
View A-A
(6) 335-4000 Adapter
(7) 165-7948 Check Valve Gp
Attach check valve group (7) to previously installed adapter (6). Using a backing wrench to prevent adapter (6) from moving, tighten check valve group (7) to 55 8 N m (41 6 lb ft).
Illustration 8 g06100419
View A-A
(7) 165-7948 Check Valve Gp
(8) 395-9034 Hose As
Connect hose assembly (8) to check valve group (7). Using a backing wrench to prevent check valve group (7) from moving, tighten hose assembly (8) to 27 4 N m (239 35 lb in).
Illustration 9 g06100416
View A-A
(D) Existing fitting
(9) 6V-9836 Swivel Tee
Attach swivel tee (9) to existing fitting (D) on the left stick cylinder lock valve. Using a backing wrench to prevent existing fitting (D) from moving, tighten swivel tee (9) to 45 5 N m (33 4 lb ft).
Illustration 10 g06100384
View A-A
(C) Existing drain line
(9) 6V-9836 Swivel Tee
(10) 6V-8397 O-Ring Seal
Attach previously removed existing drain line (C), as saved in step 1 to swivel tee (9) using one O-ring seal (10) as shown in Illustration 10. Using a backing wrench to prevent swivel tee (9) from moving, tighten existing drain line (C) to 45 5 N m (33 4 lb ft).
Illustration 11 g06100391
View A-A
(8) 395-9034 Hose As
(9) 6V-9836 Swivel Tee
(10) 6V-8397 O-Ring Seal
(11) 6V-8934 Connector
(12) 4J-5477 O-Ring Seal
Attach connector (9) with one O-ring seal (10) to swivel tee (9) as shown in Illustration 10. Using a backing wrench to prevent swivel tee (9) from moving, tighten connector (11) to 45 5 N m (33 4 lb ft).
Connect hose assembly (8) to connector (11) with O-ring seal (12) as shown in Illustration 11. Using a backing wrench to prevent connector (11) from moving, tighten hose assembly (8) to 27 4 N m (239 35 lb in).