MAGNETO AS 7L3032 - Caterpillar

Which Generate This Code:The duty cycle for the manifold absolute pressure sensor (MAPS) is greater than the maximum value.System Response:The governor gains are disabled.The warning output is activated. The diagnostic code may be viewed on the Digital Diagnostic Tool (DDT) or on the Caterpillar Electronic Technician (Cat ET).If a valid signal returns, normal operation will resume. The warning output will remain activated and the diagnostic code will continue to be displayed until the code is cleared.The response and the stability of the governor will be degraded. Emissions will be affected.Under normal conditions, protection from detonation is enabled only when the manifold pressure is greater than 60 kPa (8.7 psi). When a 317-11 code is activated, protection from detonation is always enabled.If a valid signal returns, normal operation will resume.Test Step 1. Perform the following diagnostic procedure: Inlet Manifold Pressure SensorResults:
OK - STOP