MANDREL CRANK 5P2053 - Caterpillar

1. Remove the cotter pin and pin (2) from linkage (4). Move the linkage free of the handle. Remove bolts (3) and cover (1). 2. Disconnect battery cable and ground cable from the back of disconnect switch (5). 3. Remove nut (6), washer (7) and disconnect switch from panel. The following steps are for installation of the disconnect switch.4. Put disconnect switch (5) in position and install washer (7) and nut (6) that hold the disconnect switch in place.5. Connect battery cable and ground cable to the disconnect switch.6. Put cover (1) in position on console. Install the bolts (3) that hold it.7. Put linkage (4) in position on the handle. Install the pin (2) that holds it. Install the cotter pin.