MANIFOLD-EXHAUST 1263552 - Caterpillar

Illustration 1 g01205733
Location of stairway mirror on 793CThe new 275-5588 Mirror As or 277-3431 Mirror As (Heated) are direct replacements for the previously used 5P-6873 Mirror or 221-9265 Mirror As (Heated).The new 275-5588 Mirror As is effective with the following machines:
793C (S/N: ATY988-UP)
793C XQ (S/N: CBR109-UP)
793D (S/N: FBD1-UP)
797B (S/N: JSM209-UP)The new 275-5588 Mirror As is adaptable to the following machines:
793 (S/N: 3SJ1-UP)
793B (S/N: 1HL1-UP)
793C (S/N: 4AR1-UP; 4GZ1-UP; ATY1-987)
793C XQ (S/N: CBR1-108)
797 (S/N: 5YW1-UP)
797B (S/N: JSM1-208)The new 277-3431 Mirror As (Heated) is offered on the following machines:
793D (S/N: FBD1-UP)
797B (S/N: JSM209-UP)The new 277-3431 Mirror As (Heated) is adaptable to the following machines that are equipped with the 221-9265 Mirror As (Heated):
797 (S/N: 5YW1-UP)
797B (S/N: JSM1-208)
Illustration 2 g01260575
275-5588 Mirror As Please review the following important information regarding adjustment of the new mirror assembly:
Screws (1) must be loosened in order to adjust the mirror.
Do not remove screws (1). An internal retaining ring may separate from the assembly. If the retaining ring becomes loose, a new mirror will be required.
Screws (1) must be sufficiently tightened after the mirror is adjusted. Tighten Screws (1) to the same torque. The heads of Screws (1) should be flat against the ring on the outside of the housing.