MANIFOLD GP-EXHAUST 1612717 - Caterpillar

Use Tooling (B) in order to remove pin (16) .Note: Use the suitable lifting device in order to relieve pressure from pin assembly (16) during removal.
Illustration 9 g01161739
Remove spacer (17) from the lower hitch.
Illustration 10 g01162379
Illustration 11 g01161762
Remove bolt (18) from pin assembly (19) .
Use Tooling (B) in order to remove pin assembly (19) from the upper hitch.Note: Use the suitable lifting device in order to relieve pressure from pin (19) during removal.
Illustration 12 g01162004
Attach Tooling (F) to the end of brake actuator (20) in order to release the parking brake.
Illustration 13 g00364111
Illustration 14 g01161788
Use a suitable lift truck and the suitable lifting device in order to separate the loader frame from the rear frame. Use suitable cribbing in order to support the loader frame and the rear frame.
Illustration 15 g01162236
Illustration 16 g01162377
Mark the position of caps (21) and (25). Remove bolts (22) and remove cap (21), shim (23) (not shown), and cap (25) from the upper hitch of the loader frame. Remove lip seal (24) from cap (21). Remove lip seal (26) from cap (25) .
Illustration 17 g01161805
Use Tooling (C) in order to remove bearing cups (27) and bearing cones (28) from the upper hitch of the loader frame.
Illustration 18 g01161816
Use Tooling (D) in order to remove sleeve bearing (29) from the upper hitch of the rear frame.
Illustration 19 g01161823
Use Tooling (D) in order to remove sleeve bearing (30) from the upper hitch of the rear frame.
Illustration 20 g01161934
Illustration 21 g01161944
Mark the position of caps (31) and (35). Remove bolts (33). Remove caps (31) and (35) and shim (34) (not shown). Remove lip seal (32) from cap (31). Remove lip seal (36) from cap (35) .
Illustration 22 g01161929
Use Tooling (E) in order to remove bearing cups (37) and bearing cones (38) from the lower hitch of the rear frame.