MANIFOLD GP-HYDRAULIC 1866317 - Caterpillar

Both the 3304B engine and the 3306B engine are direct fuel injected four stroke cycle engines. The 3304B is an in-line four cylinder engine, and the 3306B is an in-line six cylinder engine. Each cylinder head has two inlet valves and two exhaust valves. The rocker arms and the valves are actuated by the camshaft. The action is performed by mechanical lifters and push rods.A full-range hydramechanical governor controls the fuel injection pump output, maintaining the engine rpm selected by the operator. Individual injection pumps (one for each cylinder) meter and pump fuel under high pressure to fuel injection nozzles. Automatic timing advance provides the best fuel injection timing over the full range of engine speed.The fuel ratio control is located on the governor. The fuel ratio control restricts the fuel rack movement. Only the proper amount of fuel is allowed to be injected into the cylinders during acceleration. This minimizes exhaust smoke.Inlet air is filtered by an air cleaner. The 3304B Marine Auxiliary and the 3304B Marine Generator Set engines are available as either naturally aspirated or turbocharged engines. The standard 3306B Marine Auxiliary and Generator Set engines are turbocharged.In turbocharged engines, inlet air is compressed by a turbocharger before the air enters the engine cylinders. The turbocharger is driven by engine exhaust.The cooling system consists of:* a gear driven centrifugal pump* one thermostat which regulates the engine coolant temperature* an oil cooler, and* a radiator (incorporating a shunt system).The engine lubricating oil, which is both cooled and filtered, is supplied by a gear-type pump. Bypass valves provide unrestricted flow of lubrication oil to the engine parts if oil viscosity is high, or if the oil cooler or the oil filter elements become plugged.Engine efficiency, efficiency of emission controls, and engine performance depend on adherence to proper operation and maintenance recommendations. Engine performance and efficiency also depend on the use of recommended fuels, lubrication oils, and coolants. Follow the recommended Maintenance Schedule found in this publication, paying attention to air cleaner, fuel system, lubrication system, and cooling system maintenance.Engine Specifications