1882919 MANIFOLD-EXHAUST Caterpillar parts
C9
Rating:
Alternative (cross code) number:
CA1882919
188-2919
1882919
CA1882919
188-2919
1882919
Weight: 85 pounds 38 kg.
GENERATOR SET, MARINE ENGINE,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$102.91
05 Sep 2021
US: UnbeatableSale,
Flomo 1882919 Blue Premium Cutlery - 36 Count - Case of 36
FLOMO One Style per Case || 12 forks, 12 knives, 12 spoons per bag || 36 count || Case of 36Specifications || Color: Blue
FLOMO One Style per Case || 12 forks, 12 knives, 12 spoons per bag || 36 count || Case of 36Specifications || Color: Blue
This part in 7 request:
Show.
This information for suppliers only!
2023-05-29
2023-05-29
2022-05-05
2022-05-03
2022-04-19
2022-04-19
2020-09-23
Number on catalog scheme:
2
For full view, you need register
Compatible equipment models: 1882919:
Information:
Normal Operating Parameters ( 3500B Engines)
In order to activate the ORS, the following conditions must be met:
The fuel rate setting is greater than 10 mm (0.40 inch).
The engine speed is between 1100 and 1850 rpm.
The jacket water coolant temperature must be 63 to 107 °C (145 to 225 °F).
The oil filter differential pressure must be less than 69 kPa (10 psi).
The engine has been running for five minutes.
The engine oil is above the low level switch.
The machine's fuel tank level is above ten percent capacity.
After the calculation has been completed, the ECM delays powering the metering valve for five minutes. When the ORS is activated, the time for activation of the oil metering valve is determined by the ECM. The time of the activation is based on the actual load factor or the fuel that is consumed by the engine.Normal Operating Parameters ( C32 Engines)
In order to activate the ORS, the following conditions must be met:
The engine speed must be above 1100 rpm.
The jacket water coolant temperature must be 63 to 107 °C (145 to 225 °F).
The engine has been running for five minutes.
The engine oil is above the low level switch.
The level of the makeup tank is above low.
The machine's fuel tank level is above ten percent capacity. When the ORS is activated, the time for activation of the oil metering valve is determined by the ECM. The time of the activation is based on the actual load factor and the fuel that is consumed by the engine.Normal Operating Parameters ( C175 Engines)
In order to activate the ORS, the following conditions must be met:
The engine speed must be above 1100 rpm.
The jacket water coolant temperature must be 63 to 107 °C (145 to 225 °F).
The engine has been running for five minutes.
The engine oil is above the low level switch.
The machine's fuel tank level is above ten percent capacity. When the ORS is activated, the time for activation of the oil metering valve is determined by the ECM. The time of the activation is based on the engine's fuel consumption for the previous five minute period.Valve Flow Procedure
Use the following procedure in order to determine if a problem has occurred in the ORS.
Disconnect the hose for the metered oil from the appropriate fuel system component. Place the hose into a graduated cylinder in order to collect any oil that will be discharged from the system during the test. Cap the fitting at the fuel system component before you begin the test.
Start the engine. Allow the engine to run at low engine idle.
Use Caterpillar Electronic Technician (ET) to activate the override function for the ORS. This will power the valve and this will allow oil to pass through the system.
If oil does not pass through the valve, check the following items:
Engine oil level
Fuel level of machine
Engine oil filters
Oil lines for plugging
Electronic faultsProcedure for Measuring Oil Filter Differential Pressure ( 3500B Engines)
The jacket water coolant temperature of the engine must be 80 to 95 °C (176 to 203 °F).
Run
In order to activate the ORS, the following conditions must be met:
The fuel rate setting is greater than 10 mm (0.40 inch).
The engine speed is between 1100 and 1850 rpm.
The jacket water coolant temperature must be 63 to 107 °C (145 to 225 °F).
The oil filter differential pressure must be less than 69 kPa (10 psi).
The engine has been running for five minutes.
The engine oil is above the low level switch.
The machine's fuel tank level is above ten percent capacity.
After the calculation has been completed, the ECM delays powering the metering valve for five minutes. When the ORS is activated, the time for activation of the oil metering valve is determined by the ECM. The time of the activation is based on the actual load factor or the fuel that is consumed by the engine.Normal Operating Parameters ( C32 Engines)
In order to activate the ORS, the following conditions must be met:
The engine speed must be above 1100 rpm.
The jacket water coolant temperature must be 63 to 107 °C (145 to 225 °F).
The engine has been running for five minutes.
The engine oil is above the low level switch.
The level of the makeup tank is above low.
The machine's fuel tank level is above ten percent capacity. When the ORS is activated, the time for activation of the oil metering valve is determined by the ECM. The time of the activation is based on the actual load factor and the fuel that is consumed by the engine.Normal Operating Parameters ( C175 Engines)
In order to activate the ORS, the following conditions must be met:
The engine speed must be above 1100 rpm.
The jacket water coolant temperature must be 63 to 107 °C (145 to 225 °F).
The engine has been running for five minutes.
The engine oil is above the low level switch.
The machine's fuel tank level is above ten percent capacity. When the ORS is activated, the time for activation of the oil metering valve is determined by the ECM. The time of the activation is based on the engine's fuel consumption for the previous five minute period.Valve Flow Procedure
Use the following procedure in order to determine if a problem has occurred in the ORS.
Disconnect the hose for the metered oil from the appropriate fuel system component. Place the hose into a graduated cylinder in order to collect any oil that will be discharged from the system during the test. Cap the fitting at the fuel system component before you begin the test.
Start the engine. Allow the engine to run at low engine idle.
Use Caterpillar Electronic Technician (ET) to activate the override function for the ORS. This will power the valve and this will allow oil to pass through the system.
If oil does not pass through the valve, check the following items:
Engine oil level
Fuel level of machine
Engine oil filters
Oil lines for plugging
Electronic faultsProcedure for Measuring Oil Filter Differential Pressure ( 3500B Engines)
The jacket water coolant temperature of the engine must be 80 to 95 °C (176 to 203 °F).
Run
Caterpillar parts catalog:
Parts manifold Caterpillar catalog:
3090715
MANIFOLD GP-FUEL
C4.4, C6.6, C9
C4.4, C6.6, C9
2107562
MANIFOLD
3054
3054
2040372
MANIFOLD
3054B
3054B
7W3883
MANIFOLD-OIL COOLER
3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8, G3606, G3606B, G3608, G3612, G3616
3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8, G3606, G3606B, G3608, G3612, G3616
2455939
MANIFOLD
C1.5
C1.5
2819616
MANIFOLD
C2.2
C2.2
2305124
MANIFOLD AS
C2.2
C2.2