2422956 MANIFOLD GP-CONTROL Caterpillar parts
M325C MH, M325D L MH, M325D MH
Rating:
Alternative (cross code) number:
CA2422956
242-2956
2422956
CA2422956
242-2956
2422956
Weight: 7 pounds 3 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 2422956:
Number on catalog scheme:
25
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 168-0383 Circuit Breaker Bar 1
Illustration 1 g00609523
Typical Example
Note: Release the tension on the belt at the belt tightener, if the engine is not equipped with a belt tensioner.
Use Tooling (A) to release the tension on belt tensioner (5).
Remove drive belt (4) from the drive pulley on alternator (3).
Place an index mark on the wires of harness assembly (1) that are connected to the alternator. Disconnect harness assembly (1) from the alternator.
Remove bolts (2).
Remove alternator (3) from the mounting bracket. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 168-0383 Circuit Breaker Bar 1
Illustration 2 g00609523
Typical example
Position alternator (3) on the mounting bracket. Install bolts (2).
Use Tooling (A) to install drive belt (4) on the drive pulley of the alternator. Note: Adjust the tension on the drive belt if the engine is not equipped with a belt tensioner. Refer to the Operation and Maintenance Manual for the correct adjusting procedure.
Connect harness assembly (1) to the alternator. Use the index marks to correctly connect the harness assembly. Tighten the mounting bolt for the ground wire to a torque of 6.2 0.6 N m (54 5 lb in). Tighten the mounting bolt for the battery wire to a torque of 11.3 2.3 N m (100 20 lb in).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 168-0383 Circuit Breaker Bar 1
Illustration 1 g00609523
Typical Example
Note: Release the tension on the belt at the belt tightener, if the engine is not equipped with a belt tensioner.
Use Tooling (A) to release the tension on belt tensioner (5).
Remove drive belt (4) from the drive pulley on alternator (3).
Place an index mark on the wires of harness assembly (1) that are connected to the alternator. Disconnect harness assembly (1) from the alternator.
Remove bolts (2).
Remove alternator (3) from the mounting bracket. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 168-0383 Circuit Breaker Bar 1
Illustration 2 g00609523
Typical example
Position alternator (3) on the mounting bracket. Install bolts (2).
Use Tooling (A) to install drive belt (4) on the drive pulley of the alternator. Note: Adjust the tension on the drive belt if the engine is not equipped with a belt tensioner. Refer to the Operation and Maintenance Manual for the correct adjusting procedure.
Connect harness assembly (1) to the alternator. Use the index marks to correctly connect the harness assembly. Tighten the mounting bolt for the ground wire to a torque of 6.2 0.6 N m (54 5 lb in). Tighten the mounting bolt for the battery wire to a torque of 11.3 2.3 N m (100 20 lb in).
Caterpillar SIS machinery equipment:
Caterpillar SIS
M325C Material Handler PAN00001-UP (MACHINE) POWERED BY 3126B Engine »
242-2956
MANIFOLD GP-CONTROL
M325D Material Handler EDF00001-01999 (MACHINE) POWERED BY C-7 Engine »
242-2956
MANIFOLD GP-CONTROL
M325D L Material Handler KAY00001-01999 (MACHINE) POWERED BY C-7 Engine »
242-2956
MANIFOLD GP-CONTROL
Caterpillar parts catalog:
Parts manifold Caterpillar catalog:
2195840
MANIFOLD GP-EXHAUST
3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, AP-1055D, AP-755, BG-...
3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, AP-1055D, AP-755, BG-...
2731393
MANIFOLD GP-CONTROL
M325D L MH, M325D MH, M330D
M325D L MH, M325D MH, M330D
2350799
MANIFOLD GP-CONTROL
M325C MH
M325C MH
3126, 3126B, 3126E, 322C, 322C FM, 325C, C7, M325C MH
3126, 3126B, 3126E, 322C, 322C FM, 325C, M325C MH
3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, AP-1055D, AP-755, BG-...
3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, AP-1055D, AP-755, BG-...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312E, 312E L, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 316E L, 318D2 L, 318E L, 319D, 319D L, 319D LN, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320D, 320D ...
1700848
MANIFOLD AS
312D, 315D L, 319D, 319D L, 319D LN, 320C, 320D, 320D FM, 320D L, 320D LRR, 320D RR, 320D2, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325D, 325D FM...
312D, 315D L, 319D, 319D L, 319D LN, 320C, 320D, 320D FM, 320D L, 320D LRR, 320D RR, 320D2, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325D, 325D FM...
307B, 315B, 315B FM L, 320B FM LL, 322 FM L, 322B L, 325 FM L, 325 L, 325B L, 325C FM, 330, 330 FM L, 330 L, 330B L, 330C FM, 345B, 345B II, 345B II MH, 345B L, 350, 350 L, M325B, M325C MH, W330B, W34...
6T9559
MANIFOLD
16M, 24H, 320D, 320D FM, 320D L, 324D FM, 324D FM LL, 325D FM, 325D FM LL, 325D MH, D10N, D10R, D11N, D11R, D6R II, D6R III, D6T, D7R II, D8N, D8R, D8R II, D9L, D9R, M325D L MH, M325D MH
16M, 24H, 320D, 320D FM, 320D L, 324D FM, 324D FM LL, 325D FM, 325D FM LL, 325D MH, D10N, D10R, D11N, D11R, D6R II, D6R III, D6T, D7R II, D8N, D8R, D8R II, D9L, D9R, M325D L MH, M325D MH
1700845
MANIFOLD AS
325C, 325D L, 330C, 330D L, 336D L, 336E HVG, 345C L, 349E L HVG, D3G, D4G, D5G, M325C MH, M325D L MH, M325D MH, M330D
325C, 325D L, 330C, 330D L, 336D L, 336E HVG, 345C L, 349E L HVG, D3G, D4G, D5G, M325C MH, M325D L MH, M325D MH, M330D
2350799
MANIFOLD GP-CONTROL
M325C MH
M325C MH
3814960
MANIFOLD GP-EXHAUST
793D, D11N
793D, D11N