MANIFOLD GP-CONTROL 2596745 - Caterpillar

Copy ECM Configuration Function in Caterpillar Electronic Technician
Illustration 1 g02358919
Typical example
Select "Service", then "Copy Configuration", then "ECM Replacement" from the menu options. Refer to illustration 1.
Illustration 2 g02358937
Typical example
Click "Cancel" on the pop-up window. Refer to illustration 2.
Illustration 3 g02358963
Typical example
Select "Yes" on the message.
Refer to illustration 3.
Illustration 4 g02358966
Typical example
The message will confirm the ECM parameter changes have been copied into an XML file format. Refer to illustration 4.
Illustration 5 g02358969
Typical example
Save the updated ECM configuration file to a safe file location. Refer to illustration 5.The resulting ECM file must be saved in XML format and emailed to updated_ECM_files.There is no pro-active requirement for the updated ECM configuration files. This information is only required when alterations are made to the ECM configuration file through troubleshooting, servicing, and routine maintenance.Note: If ECM parameters are changed during troubleshooting procedures, Caterpillar only requires the final set ECM parameters once the engine has been put back into operation.This process will provide up-to-date ECM configuration data that is accessible via Technical Marketing Information (TMI).