MANIFOLD 2613361 - Caterpillar

Illustration 15 g00806022
(K) 203-6663 Bracket
Route hoses (D), (C), (B) and (A) from the 203-6663 Bracket to the implement control valve. Hose (Y) should be routed from the hydraulic oil tank, through 203-6663 Bracket , and then to the bottom of the boom cylinder.
Illustration 16 g00806029
Install the 208-8453 Service Platform by using two 113-0693 Lockwashers , two 086-2369 Bolts , and one 208-8454 Clamp . Repeat this procedure to the other side of the machine.
Illustration 17 g00806108
(MM) Front view of left side bracket. (NN) Front view of right side bracket.
Illustration 18 g00806085
Hose routing for all booms except for FT100 booms
Illustration 19 g00847633
Hose routing for FT100 booms
Install the following hose assemblies and seals from the 203-6663 Bracket and the 203-9047 Bracket to the boom. Use the following chart in order to determine the correct O-Ring Seal.
Table 7
Part Number of the Hose Assembly     Letter of the Hose     Quantity of the Seal     Part Number of the O-Ring Seal    
203-9591     H     2     6V-9746    
203-9591     C     2     6V-9746    
203-9591     B     2     6V-9746    
203-9591     J     2     6V-9746    
204-5355     A     2     6V-9746    
203-9593     D     2     6V-8398    
203-9593     E     2     6V-8398    
203-9593     G     2     6V-8398    
203-9593     F     2     6V-8398    
204-5354     Y     2     6V-8398    
Illustration 20 g00852245
Install 3 m (10 ft) of 177-0529 Guard (19), as shown. Install 2 m (7 ft) of the 161-5103 Guard (18), as shown.