2881559 MANIFOLD AS Caterpillar parts
CG137-08, CG137-12, G3408, G3408B, G3408C, G3412, G3412C
Rating:
Alternative (cross code) number:
CA2881559
288-1559
2881559
CA2881559
288-1559
2881559
Weight: 56 pounds 25 kg.
GAS ENGINE, GENERATOR SET,
This part in 6 request:
Show.
This information for suppliers only!
2020-11-25
2019-10-18
2018-06-03
2017-05-25
2017-05-25
2017-03-26
Compatible equipment models: 2881559:
Information:
Which Generate This Code:This diagnostic code is recorded when the implement electronic control (ECM) determines that the solenoid valve is out of calibration.The possible causes for this diagnostic code are listed:
New software has been flashed.
The calibration of the valve has failed.System Response:The machine response is listed:
The implement features will not operate efficiently.Note: Ensure that the diagnostic code is active and that the diagnostic code indicator is active.Test Step 1. CHECK CALIBRATION.
Calibrate the main control valve. See Testing and Adjusting, "Main Control Valve (Electronic Technician) - Calibrate" or Testing and Adjusting, "Main Control Valve (Operator Monitor) - Calibrate".
Recheck the diagnostic code.
Ensure that the diagnostic code is active.
Observe the ON/OFF status of the diagnostic code indicator as the lift arm is fully raised and lowered.Expected Result:The diagnostic code indicator is inactive.Results:
YES - The diagnostic code indicator is inactive.Repair: The diagnostic code is not active now. Calibration corrected the diagnostic code. Clear the diagnostic code. Stop.
NO - The diagnostic code indicator is active.Repair: It is unlikely that the ECM has failed. Perform calibration for the Main Control Valve again. Also, ensure that the diagnostic code indicator is active for this diagnostic code. If the cause is not found, replace the solenoid and perform the calibration again. If this does not eliminate the diagnostic code, replace the ECM. See Testing and Adjusting, "Electronic Control Module (ECM) - Replace". Stop.
New software has been flashed.
The calibration of the valve has failed.System Response:The machine response is listed:
The implement features will not operate efficiently.Note: Ensure that the diagnostic code is active and that the diagnostic code indicator is active.Test Step 1. CHECK CALIBRATION.
Calibrate the main control valve. See Testing and Adjusting, "Main Control Valve (Electronic Technician) - Calibrate" or Testing and Adjusting, "Main Control Valve (Operator Monitor) - Calibrate".
Recheck the diagnostic code.
Ensure that the diagnostic code is active.
Observe the ON/OFF status of the diagnostic code indicator as the lift arm is fully raised and lowered.Expected Result:The diagnostic code indicator is inactive.Results:
YES - The diagnostic code indicator is inactive.Repair: The diagnostic code is not active now. Calibration corrected the diagnostic code. Clear the diagnostic code. Stop.
NO - The diagnostic code indicator is active.Repair: It is unlikely that the ECM has failed. Perform calibration for the Main Control Valve again. Also, ensure that the diagnostic code indicator is active for this diagnostic code. If the cause is not found, replace the solenoid and perform the calibration again. If this does not eliminate the diagnostic code, replace the ECM. See Testing and Adjusting, "Electronic Control Module (ECM) - Replace". Stop.
Caterpillar parts catalog:
Parts manifold Caterpillar catalog:
7N3175
MANIFOLD AS
3408, 3408B, 3408C, 3412, 3412C, 3412E, G3408, G3408B, G3408C, G3412
3408, 3408B, 3408C, 3412, 3412C, 3412E, G3408, G3408B, G3408C, G3412
8N8184
MANIFOLD AS-LH
3412, 3412C, 3412D, 3412E, C30, C32, G3412
3412, 3412C, 3412D, 3412E, C30, C32, G3412
1470642
MANIFOLD AS
3408, 3408C, 3412, 3412C, 3412E, G3408, G3412
3408, 3408C, 3412, 3412C, 3412E, G3408, G3412
1054664
MANIFOLD AS
CG137-12, G3412, G3412C
CG137-12, G3412, G3412C
1054665
MANIFOLD AS
CG137-12, G3412, G3412C
CG137-12, G3412, G3412C
3780726
MANIFOLD
3408, CG137-08, CG137-12
3408, CG137-08, CG137-12
1054662
MANIFOLD AS
G3408, G3408B, G3408C
G3408, G3408B, G3408C
1054661
MANIFOLD AS
G3408, G3408B, G3408C
G3408, G3408B, G3408C
3611783
MANIFOLD AS
CG137-12
CG137-12
3611784
MANIFOLD AS
CG137-12
CG137-12
3546953
MANIFOLD AS
CG137-08
CG137-08
3546954
MANIFOLD AS
CG137-08
CG137-08
1054665
MANIFOLD AS
CG137-12, G3412, G3412C
CG137-12, G3412, G3412C
1054664
MANIFOLD AS
CG137-12, G3412, G3412C
CG137-12, G3412, G3412C
1633104
MANIFOLD-EXHAUST
24H, 3412, 3412C, 3412E, 651E, 657E, D10N, D10R, D9L
24H, 3412, 3412C, 3412E, 651E, 657E, D10N, D10R, D9L
1633103
MANIFOLD-EXHAUST
24H, 3412, 3412C, 3412E, 5110B, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 834B, 836, 844, 844H, 988B, 988F II, 990, 990 II, 990H, 992C, D10N, D10R, D10T, D8L, D9L, D9N, D9R, PM-565B
24H, 3412, 3412C, 3412E, 5110B, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 834B, 836, 844, 844H, 988B, 988F II, 990, 990 II, 990H, 992C, D10N, D10R, D10T, D8L, D9L, D9N, D9R, PM-565B
8N0991
MANIFOLD-EXHAUST
3408B, 3412, 637D, D44B, D550B, PR-750B
3408B, 3412, 637D, D44B, D550B, PR-750B
8N0989
MANIFOLD-EXHAUST
3408B, 3412, 637D, D44B, D550B, D9L, PR-750B
3408B, 3412, 637D, D44B, D550B, D9L, PR-750B
1495182
MANIFOLD AS-OIL
C18, G3516B
C18, G3516B
1028502
MANIFOLD-EXHAUST
3406B, 3406C, 824C, 980F, 980G, 980G II, SS-250
3406B, 3406C, 824C, 980F, 980G, 980G II, SS-250
2018541
MANIFOLD
3054
3054
1289509
MANIFOLD-EXHAUST
3508, 3512
3508, 3512