MANIFOLD AR. 2H9837 - Caterpillar

Use this screen in order to change parameters for the display screen. Press the A function key in order to change the backlight. The backlight is the brightness of the screen. Turn the "encoder" clockwise in order to increase the values. Turn the "encoder" counterclockwise in order to decrease the values. 100 is full brightness.Press the B function key in order to change the screen saver. The screen saver is displayed after the "Timeout" setting. The screen saver has three values:
"OFF"
"DIMMED"
"BLACK"The screen saver will activate after the number of minutes in the "Timeout" setting. If the "DIMMED" setting is chosen, the screen fades to the "Backlight" setting. The screen saver will deactivate when any button is pressed.Press the C function key in order to change the "timeout" time. Turn the "encoder" clockwise in order to increase the number of minutes. Turn the "encoder" counterclockwise in order to decrease the number of minutes.Press the D function key in order to change the dimmed light function. "Dimmed Light" is the brightness of the dimmed screen saver. Turn the "encoder" clockwise in order to increase the number. Turn the "encoder" counterclockwise in order to decrease the number.Press the "Encoder" key (F5) in order to change the direction of scrolling. "Standard" will scroll clockwise. "Goofy" will scroll counterclockwise."Language" Menu
Illustration 20 g01204698
Change the language of the display."Info" Screen
Illustration 21 g01270472
This screen displays basic information about the IQAN monitor. Press the A function key in order to display the modules. Press the B function key in order to display "modem" information. Press the C function key in order to view the logs."Module" Information
Illustration 22 g01203424
This screen displays the status of each of the IQAN modules on the machine.Use the encoder to select the desired module. Press the knob when the selection is correct.
Illustration 23 g01204209
"Monitor Display"
Illustration 24 g01204211
"Left Joystick"
Illustration 25 g01204212
"Right Joystick"
Illustration 26 g01204215
"Box 1 Can B"
Illustration 27 g01204218
"Box 2 Can C""Modem" Information
Illustration 28 g01203425
The IQAN-MDL configuration from the factory does not include a modem."Logs" Information
Illustration 29 g01203429
"Logs"This screen allows access to several "system logs". The logs record events and times of significant machine events:
Engine starts
Low oil level indicator
Hydraulic system protectionUse the encoder to select the desired module. Press the knob when the selection is correct.
Illustration 30 g01204231
"System Log"
Illustration 31 g01204232
"Hydraulic Log"