MANIFOLD AS 3042740 - Caterpillar

Illustration 1 g03625361
Left side view
Table 1
Specification for 420-3695 Hydraulic Tank and Mounting Gp
Item Qty Part Specification Description
1 1 253-8295 Sight Gauge Tighten two bolts to 12.0 1.5 N m (106.2 13.3 lb in).
2 2 9M-0164 Hose Clamp Torque to 4.5 0.5 N m (39.8 4.4 lb in).
Illustration 2 g03625362
Rear view
Table 2
Item Qty Part Specification Description
3 1 1P-4278 Hose Clamp Torque to 0.9 0.2 N m (8.0 1.8 lb in).
4 2 150-3027 Elbow As Torque to 45 5 N m (33 4 lb ft).
Illustration 3 g03625363
Front view
Table 3
Item Qty Part Specification Description
5 1 9R-9925 Breather Filter Element Install filter so that the air flow into the tank is in the direction of the arrow on the filter.
6 2 5D-1026 Band Clamp Torque to 4.5 0.5 N m (39.8 4.4 lb in).
7 4 8T-4191 Bolt Hand tighten all four bolts before torquing to required amount, when assembling tank to bracket.
8 1 240-9671 Bracket As Position hydraulic tank bracket such that there is a clearance of 31 mm (1.2 inch) between front surface of bracket and rear face of engine block. When tank is mounted in bracket, a minimum clearance of 7 mm (0.3 inch) must be maintained between suction outlet on tank and filter head on transmission.