3065134 MANIFOLD GP-CONTROL Caterpillar parts
24M
Rating:
Alternative (cross code) number:
CA3065134
306-5134
3065134
CA3065134
306-5134
3065134
Weight: 15 pounds 7 kg.
MOTOR GRADER,
Compatible equipment models: 3065134:
Number on catalog scheme:
59
For full view, you need register
Information:
When the engine is running, the cable control or the hydraulic control is ready to operate the bulldozer.Cable Bulldozer Operation
CABLE CONTROL LEVER POSITIONS
1-RAISE. 2-LOWER. 3-HOLD. 4-LOCKOUT.Hydraulic Bulldozer Operation
HYDRAULIC CONTROL LEVER POSITIONS 1 RAISE.2 LOWER.3 HOLD.4 FLOAT.Tilt Cylinder Operation
CROSSOVER VALVE
PULL OUT TO OPERATE TILT CYLINDER.Tilt Cylinder Controls
4 Types Illustrated
TILT CYLINDER CONTROL POSITIONS
1-LOWER LEFT END OF BLADE. 2-HOLD. 3-LOWER RIGHT END OF BLADE.Operating Adjustments
Blade adjustments on cable and hydraulic bulldozers are the same and all reference to one will apply to the other.All adjustments should be made with the blade raised.Blade Tilting: To tilt the blade, shorten the brace (2) on one side and lengthen the brace on the other side. The side of the short brace will be the low side. To change the length of the braces, rotate at (1). Refer to the Specifications for maximum tilting:
BRACE ADJUSTMENT
1-HANDLE OR HOLE. 2-BRACE. A-SEE PAGE 15.Blade Tipping: To adjust the digging angle by tipping the top of the blade backward and forward, shorten or lengthen the braces (2).Blade tilting or tipping on a bulldozer equipped with a tilt cylinder is accomplished by adjusting one brace manually and using the hydraulic tilt cylinder to achieve the desired tilt or tip.Refer to the Specifications for maximum tipping.Measurement (B) between the shoulder on the adjusting screw and the end of the brace tube is used to determine the normal level blade operation and maximum tipping.
BRACE ADJUSTMENT
B-SEE PAGE 15. Blade Angling: To angle the blade: remove pins, position blade to desired angle and install pins.
BLADE ANGLING
(ALL "A" BULLDOZERS)
CABLE CONTROL LEVER POSITIONS
1-RAISE. 2-LOWER. 3-HOLD. 4-LOCKOUT.Hydraulic Bulldozer Operation
HYDRAULIC CONTROL LEVER POSITIONS 1 RAISE.2 LOWER.3 HOLD.4 FLOAT.Tilt Cylinder Operation
CROSSOVER VALVE
PULL OUT TO OPERATE TILT CYLINDER.Tilt Cylinder Controls
4 Types Illustrated
TILT CYLINDER CONTROL POSITIONS
1-LOWER LEFT END OF BLADE. 2-HOLD. 3-LOWER RIGHT END OF BLADE.Operating Adjustments
Blade adjustments on cable and hydraulic bulldozers are the same and all reference to one will apply to the other.All adjustments should be made with the blade raised.Blade Tilting: To tilt the blade, shorten the brace (2) on one side and lengthen the brace on the other side. The side of the short brace will be the low side. To change the length of the braces, rotate at (1). Refer to the Specifications for maximum tilting:
BRACE ADJUSTMENT
1-HANDLE OR HOLE. 2-BRACE. A-SEE PAGE 15.Blade Tipping: To adjust the digging angle by tipping the top of the blade backward and forward, shorten or lengthen the braces (2).Blade tilting or tipping on a bulldozer equipped with a tilt cylinder is accomplished by adjusting one brace manually and using the hydraulic tilt cylinder to achieve the desired tilt or tip.Refer to the Specifications for maximum tipping.Measurement (B) between the shoulder on the adjusting screw and the end of the brace tube is used to determine the normal level blade operation and maximum tipping.
BRACE ADJUSTMENT
B-SEE PAGE 15. Blade Angling: To angle the blade: remove pins, position blade to desired angle and install pins.
BLADE ANGLING
(ALL "A" BULLDOZERS)
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts manifold Caterpillar catalog:
24H, 24M, 824C, 824G, 824G II, 825G, 825G II, 826C, 826G, 826G II, 834B, 836, 980C, 980F, 980F II, 980G, 980G II, 988B, AD30, D350E, D350E II, D400, D400E, D44B, D550B, R2900, R2900G, R3000H
24M, 3406B, 3406C, 3406E, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637D, 63...
1894387
MANIFOLD
16M, 24M, 854K, 988G, 988H, 988K, 990 II, 990H, 990K, 992G, 992K, 993K
16M, 24M, 854K, 988G, 988H, 988K, 990 II, 990H, 990K, 992G, 992K, 993K
2951146
MANIFOLD
24M, 824H, 825H, 826H, 834H, 836H, 980H, 988H
24M, 824H, 825H, 826H, 834H, 836H, 980H, 988H
8X5974
MANIFOLD
24H, 24M, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 793, 793B, 793C, 994, 994D, 994F, 994H
24H, 24M, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 793, 793B, 793C, 994, 994D, 994F, 994H
3628366
MANIFOLD
16M, 24M, 777F, 777G, 785C, 785D, 789C, 789D, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797B, 797F, 854K, 988H, 988K, 990K, 992K, 993K, 994F, 994H, D10T2, D11T
16M, 24M, 777F, 777G, 785C, 785D, 789C, 789D, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797B, 797F, 854K, 988H, 988K, 990K, 992K, 993K, 994F, 994H, D10T2, D11T
3514950
MANIFOLD AS
24M, 770, 772, 834H, 836H, 988H
24M, 770, 772, 834H, 836H, 988H
3808545
MANIFOLD-EXHAUST
24M, 735B, 740B, 824C, 824H, 824K, 825H, 825K, 826H, 826K, 834K, 980G, 980H, 986H, 988K, PM-201, RM-500
24M, 735B, 740B, 824C, 824H, 824K, 825H, 825K, 826H, 826K, 834K, 980G, 980H, 986H, 988K, PM-201, RM-500
9T8065
MANIFOLD
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
1076684
MANIFOLD
24H, 24M
24H, 24M
2778875
MANIFOLD
24M
24M
120M, 120M 2, 12M, 12M 2, 140M, 140M 2, 14M, 160M, 160M 2, 16M, 24M
1N9359
MANIFOLD ASSEMBLY
D346, D348
D346, D348
3996140
MANIFOLD GP-DEF
C13, C15, C18, C9.3
C13, C15, C18, C9.3
3735628
MANIFOLD GP-DEF
C13, C15, C18, C9.3
C13, C15, C18, C9.3
4454983
MANIFOLD GP-VALVE
966M, 966M XE, 972M, 972M XE, 980M, 982M
966M, 966M XE, 972M, 972M XE, 980M, 982M
3814795
MANIFOLD GP-EXHAUST
3512C, 3516C
3512C, 3516C
4484308
MANIFOLD GP-CONTROL
966M, 966M XE, 972M, 972M XE, 980M, 982M
966M, 966M XE, 972M, 972M XE, 980M, 982M
3576752
MANIFOLD GP-EXHAUST
D8T, D9T
D8T, D9T
THREE60 PC