MANIFOLD GP-CONTROL 3118508 - Caterpillar

Illustration 1 g01194360
Plan displays one other machineThe arrow or the machine symbol is drawn to show both the machine position and the machine heading. The infill of the arrow changes color based on the age of the position that the machine is broadcasting. By default, the color fill remains green when the age of the position is less than six seconds and changes to orange when the position is older than six seconds. Either the symbol or else the arrow disappears when the age of the position is greater than twenty-one seconds. The following keys are used in order to display other machines on the plan window.$ Position Broadcast - Configures a machine to broadcast its position for other machines to use.$ Show Other Machines - Enables the plan window to display other machines that are broadcasting positions.$ Other Machine Old Position Time - Used to set the amount of time before the infill of the symbol that is being used to display other machines changes to orange.$ Other Machine Hide Position Time - Used to set the amount of time before the symbol that is being used to display other machines disappears from the display.$ Other Machines - Species both the machine type and the machine dimensions and also matches the IP address to the machine identity.Note: The *.mwf machine file can be used in order to provide the match between the IP address and the machine identity. When the machine file is used instead of the $ Other Machines key, only the arrow symbol can be displayed. If both the $ Other Machines key and a machine file are found by CAESultra, then the $ Other Machine key is used.Reference: For detailed instruction on the keys discussed in this section, refer to Systems Operation, "Machine Configuration File".