MANIFOLD GP-INLET 3658152 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7573     Lifting Bracket     2    
B     FT1342     Guide Bolt     2    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01018439
Install Tooling (A) on the flywheel. Use a suitable lifting device. The weight of the flywheel is approximately 40 kg (88 lb).
Remove two bolts (1) . Install Tooling (B) .
Remove remaining bolts (1) that hold the flywheel to the crankshaft . Remove flywheel (2) .
Illustration 2 g01018440
If necessary, use a hammer and a punch in order to remove ring gear (3) from the flywheel.