MANIFOLD 3881916 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 3
B 138-7574 Link Bracket 2 Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01541618
Attach Tooling (A) and a suitable lifting device to power train guard (1). The weight of power train guard (1) is approximately 200 kg (440 lb). Remove bolts (2). Lower power train guard (1) to the ground.
Illustration 2 g01541619
Attach Tooling (A), Tooling (B), and a suitable lifting device to power train guard (1), as shown. Remove bolts (3). Remove power train guard (1). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 3
B 138-7574 Link Bracket 2 Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 3 g01541619
Attach Tooling (A), Tooling (B), and a suitable lifting device to power train guard (1), as shown. Position power train guard (1). Install bolts (3).
Illustration 4 g01541618
Attach Tooling (A) and a suitable lifting device to power train guard (1), as shown. The weight of power train guard (1) is approximately 200 kg (440 lb). Position power train guard (1). Position bolts (2).