MANIFOLD GP-CONTROL 3943941 - Caterpillar

that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed.The user is responsible for the performance of maintenance. All adjustments, the use of proper lubricants, fluids, filters, and the replacement of components due to normal wear and aging are included. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Refer to the maintenance procedure for any other exceptions that may change the maintenance intervals.Note: The aftertreatment system can be expected to function properly for the useful life of the engine (emissions durability period), as defined by regulation. All prescribed maintenance requirements must be followed.Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.Note: If Cat HYDO Advanced hydraulic oils are used, the hydraulic oil change interval is extended to 3000 hours. S O S services may extend the oil change even longer. Consult your Cat dealer for details.When Required
Engine Air Filter Primary Element - Clean/Replace
Engine Air Filter Secondary Element - Replace
Engine Air Precleaner - Clean
Every 10 Service Hours or Daily
Engine Oil Level - Check
Engine Oil Level - Log Additions
Initial 250 Service Hours
Engine Valve Lash - Check/Adjust
Every 500 Service Hours
Engine Oil Sample - Obtain
Every 500 Service Hours or 3 Months
Engine Crankcase Breather - Clean
Engine Oil Filter (Oil Renewal System) - Change
Engine Oil and Filter - Change
Every 1000 Service Hours or 6 Months
Engine Oil Pan Sump Screen - Inspect/Clean
Every 3000 Service Hours or 2 Years
Engine Water Pump - Inspect
Every 4000 Service Hours
Engine Valve Lash - Check/Adjust
Every 2 270 000 L (600 000 US gal) of Fuel or 8000 Service Hours
Engine Components - Rebuild/Install Reman
Every 4 540 000 L (1 200 000 US gal) of Fuel or 16 000 Service Hours
Engine Components - Clean/Inspect, Rebuild/Install Reman, Install New