MANIFOLD-EXHAUST 3979973 - Caterpillar

Illustration 1 g02499897
(1) Camera View (2) Arrows Button (3) "OK" Button (4) Tab Button (5) Brightness Button (6) Alarm Check (7) Alarm (8) Indicator for the System (9) Proximity Bar (10) Product IDDisplay Buttons
Arrow Button
Arrow button - The arrow button is used in order to perform the following functions:
Toggle the display between the camera views (front, rear, left, and right)
Highlight a selection (up/down and left/right)
Manually adjust brightness level after the brightness button is depressed (right/ left)OK Button
OK button - The "OK" button is used in order to edit settings. The operator must press the "OK" button to enter the settings. After pressing the "OK" button, the first parameter in the list that can be configured will be highlighted. The highlighted parameter can then be changed. Tab Button
Tab button - Use the tab button in order to change the active screen between the main screen, the configuration screen, and the diagnostic summary screen. The order of screens is defined in Illustration 2. Each arrow represents one press of the tab button.
Illustration 2 g03332830
(11) Main Screen (12) Configuration Screen (13) Diagnostic Summary ScreenBrightness Button
Illustration 3 g03334285
Brightness Bar example in Day Mode.
Brightness button - Press the brightness button momentarily in order view the brightness slide bar and to allow manual adjustment of the brightness for the display screen using the arrow keys. Press and hold the brightness button for two seconds in order to enable/disable night mode for the display screen. Note: The night mode will adjust the display to the minimum brightness setting in order to reduce the amount of light emitted during night time operation. The night mode brightness can be adjusted up or down and will be remembered the next time the night mode feature is enabled. When the display returns to the day mode the brightness setting will automatically adjust the 75 percent brightness. If necessary, adjust the brightness manually for personal view preferences.Alarm Acknowledge
Alarm Acknowledge - The alarm acknowledge button can be used to silence the alarm. By pressing the alarm acknowledge button, the operator acknowledges the detection of and object. The alarm acknowledge feature is only available when the alarm is active and will automatically turn off when there is a directional change (F/R) or when the system enters "STANDBY". If the object is still present or a new object appears, the system will sound the audible alarm again. The alarm acknowledge button also cancels any changes that were made in the configuration screen.