3P1656 MANIFOLD Caterpillar parts
14G, 14H, 14H NA, 16G, 16H, 16H NA
Rating:
Alternative (cross code) number:
CA3P1656
3P-1656
3P1656
CA3P1656
3P-1656
3P1656
Weight: 16 pounds 7 kg.
MOTOR GRADER,
Number on catalog scheme:
19
For full view, you need register
Information:
Every Month
Apply the antirust products Tecty or Dinitrol to the following items: articulation joints and other joints: fenders, platforms, sheet metal, handholds, loader frames, hydraulic valves and hoses.
Remove accumulated corrosive materials from the inside of the compartments of the actuator group for the hood and the tool box .Note: Reminder: Because of varying conditions, only actual experience in a particular application can dictate the adequate amount of maintenance.Every Two Years
Illustration 2 g03339224
The 431-1345 Vapor Capsules should be replaced after 2 years from manufacture date. Refer to Illustration 2 for capsule locations.Instructions for Maintenance of Electrical Connectors
Inspect sealed connectors and the receptacles for damages or corrosion and apply dielectric grease 151-1340 Dielectric Grease inside the connectors and the receptacle.
Inspect connectors that are not sealed and repair using the following procedure.
Illustration 3 g01636885
Remove the 7X-2639 Heat Shrink Tube , 210-8958 Heat Shrink Tube , or 135-5009 Heat Shrink Tube from the connectors by cutting the tube lengthwise.
Illustration 4 g01636887
Replace damaged parts and apply 151-1340 Dielectric Grease to the connectors inside the receptacle.
Assemble a new 7X-2639 Heat Shrink Tube , 210-8958 Heat Shrink Tube , or 135-5009 Heat Shrink Tube to the assembled connections. Apply 4C-9612 Silicone Sealant to both sides of the tube. Warm the surface of the 7X-2639 Heat Shrink Tube , 210-8958 Heat Shrink Tube , or 135-5009 Heat Shrink Tube to the desired size for proper protection of the connections.The following items are available through the Caterpillar parts distribution system.
4C-9612 Silicone Sealant
7X-2639 Heat Shrink Tube (50.8 mm (2 inch)), 210-8958 Heat Shrink Tube (24 mm (0.9 inch)), or 135-5009 Heat Shrink Tube (32 mm (1.3 inch))
151-1340 Dielectric Grease Protection for the Solenoid to the Power Train
Illustration 5 g01637419
Illustration 6 g01638894
View A-A with a magnified view (1) 4C-9612 Silicone Sealant (2) 135-5010 Tube (3) 7X-2639 Heat Shrink Tube , 210-8958 Heat Shrink Tube , or 135-5009 Heat Shrink Tube (4) 4C-9612 Silicone Sealant and 151-1340 Dielectric Grease
Apply the antirust products Tecty or Dinitrol to the following items: articulation joints and other joints: fenders, platforms, sheet metal, handholds, loader frames, hydraulic valves and hoses.
Remove accumulated corrosive materials from the inside of the compartments of the actuator group for the hood and the tool box .Note: Reminder: Because of varying conditions, only actual experience in a particular application can dictate the adequate amount of maintenance.Every Two Years
Illustration 2 g03339224
The 431-1345 Vapor Capsules should be replaced after 2 years from manufacture date. Refer to Illustration 2 for capsule locations.Instructions for Maintenance of Electrical Connectors
Inspect sealed connectors and the receptacles for damages or corrosion and apply dielectric grease 151-1340 Dielectric Grease inside the connectors and the receptacle.
Inspect connectors that are not sealed and repair using the following procedure.
Illustration 3 g01636885
Remove the 7X-2639 Heat Shrink Tube , 210-8958 Heat Shrink Tube , or 135-5009 Heat Shrink Tube from the connectors by cutting the tube lengthwise.
Illustration 4 g01636887
Replace damaged parts and apply 151-1340 Dielectric Grease to the connectors inside the receptacle.
Assemble a new 7X-2639 Heat Shrink Tube , 210-8958 Heat Shrink Tube , or 135-5009 Heat Shrink Tube to the assembled connections. Apply 4C-9612 Silicone Sealant to both sides of the tube. Warm the surface of the 7X-2639 Heat Shrink Tube , 210-8958 Heat Shrink Tube , or 135-5009 Heat Shrink Tube to the desired size for proper protection of the connections.The following items are available through the Caterpillar parts distribution system.
4C-9612 Silicone Sealant
7X-2639 Heat Shrink Tube (50.8 mm (2 inch)), 210-8958 Heat Shrink Tube (24 mm (0.9 inch)), or 135-5009 Heat Shrink Tube (32 mm (1.3 inch))
151-1340 Dielectric Grease Protection for the Solenoid to the Power Train
Illustration 5 g01637419
Illustration 6 g01638894
View A-A with a magnified view (1) 4C-9612 Silicone Sealant (2) 135-5010 Tube (3) 7X-2639 Heat Shrink Tube , 210-8958 Heat Shrink Tube , or 135-5009 Heat Shrink Tube (4) 4C-9612 Silicone Sealant and 151-1340 Dielectric Grease
Caterpillar parts catalog:
Parts manifold Caterpillar catalog:
12G, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160H, 160H ES, 160H NA, 163H NA, 235B, 3306, 3306B, 615C, 627, 814B, 814F, 815B, 815F, 816F, 966F, 966F II, 966G, 970F, 972G,...
12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235, 3306, 3306B, 528B, 530B, 966C, D5B, D6C, D6D, D6E, D6E SR, D6G SR, D6H, D6H XL, D6H XR, D6R
12G, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160H, 160H ES, 160H NA, 163H NA, 3306, 3306B, D6D, D6E, D6F SR, D6G SR, D6G2 LGP, D6G2 XL, D6H, D6H XR, D6R
140H, 143H, 14H, 160H, 163H, 16H, 3176, 3176B, 3176C, 3196, 345B, 345B II, 345B II MH, 345B L, 480, 65E, 75, 75C, 75D, 75E, 85C, 85D, 85E, 95E, 966G II, 972G II, C-10, C-12, MTC835, R1600, R1600G, R17...
140H, 143H, 14H, 160H, 163H, 16H, 3176, 3176B, 3176C, 3196, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 480, 572R II, 65E, 725, 730, 75, 75C, 75D, 75E, 814F, 815F, 816F, 85C, 85D, 85E, 9...
140H, 143H, 14H, 160H, 163H, 16H, 3176, 3176B, 3176C, 3196, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 480, 572R II, 65E, 725, 730, 75, 75C, 75D, 75E, 814F, 815F, 816F, 85C, 85D, 85E, 9...
16G, 16H NA, 3196, 3406, 3406B, 3406C, 3406E, 3456, 578, 583R, 587R, 621B, 621E, 621F, 623B, 623E, 623F, 627B, 627E, 627F, 735, 740, 814B, 824C, 824G, 824G II, 825G, 825G II, 826C, 826G, 826G II, 980C...
16H NA, 3406B, 3406C, 578, 583R, 587R, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 814B, D8N, D8R, D8R II
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H NA, 24H
1740310
MANIFOLD
330B L, OEMS
330B L, OEMS
120G, 12G, 130G, 140G, 14G, 16G
8J7267
MANIFOLD-OUTER
120G, 12G, 130G, 140G, 14G, 16G
120G, 12G, 130G, 140G, 14G, 16G
8J7268
MANIFOLD-OUTER
120G, 130G, 140G, 14G, 16G
120G, 130G, 140G, 14G, 16G
9T2220
MANIFOLD-RH
120G, 12G, 130G, 140G, 14G, 160G, 16G
120G, 12G, 130G, 140G, 14G, 160G, 16G
9T2219
MANIFOLD-LH
120G, 12G, 130G, 140G, 14G, 160G, 16G
120G, 12G, 130G, 140G, 14G, 160G, 16G
8E6570
MANIFOLD
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H NA, 24H
9N4156
MANIFOLD AS-PUMP
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
2P5777
MANIFOLD AS-PUMP
14G, 16G
14G, 16G
14G, 16G