MANIFOLD-EXHAUST 4214314 - Caterpillar

Connection Procedure
Personal injury or death can result from unexpected machine movement.Do not rely on the stabilizers for support of the machine while you are performing service work on the machine.The stabilizers may drift at any time, causing unexpected machine movement.If the machine is connected to the trailer, do not allow the stabilizers to support any of the weight of the machine while you perform any service work on the machine.If the machine has been separated from the trailer, use adequate blocks to support the weight of the machine while you perform any service work on the machine.To avoid personal injury, or injury to nearby personnel, due to unexpected machine movement, make sure the stabilizers are not supporting any of the weight of the machine while you perform any service work on the machine.
Lower the boom until the grapple is resting on the ground.
Carefully lower all four of the stabilizers. Lower the stabilizers until the cylinders are fully extended.Reference: Refer to Operation and Maintenance Manual, SEBU7172, "Cab Features" for instruction for the operation of the stabilizer controls.
Attach a suitable lifting device and a hoist to the machine.
Raise the machine until the machine has enough clearance for the installation of the trailer. The weight of the machine is 16375 kg (36100 lb).
Move the trailer into position under the machine.
Illustration 1 g00623342
Illustration 2 g00623341
Install 64 nuts (5), the washers, 16 plates (4), and 32 studs (3). Tighten nuts (5) to a torque of 800 100 N m (590 73 lb ft).
Illustration 3 g00623340
Typical Example
Install all hose assemblies (1) on tube assemblies (2) .
Illustration 4 g00623339
Connect hose assemblies (1) to the machine.