4342473 MANIFOLD GP-CONTROL Caterpillar parts
980H
Rating:
Alternative (cross code) number:
CA4342473
434-2473
4342473
CA4342473
434-2473
4342473
Weight: 33 pounds 15 kg.
WHEEL LOADER,
Compatible equipment models: 4342473:
Number on catalog scheme:
22
For full view, you need register
Information:
Removal Procedure
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Install the truck body retaining cables. Operation and Maintenance Manual, "Cable (Truck Body Retaining)".
Release the system pressure. Refer to Operation and Maintenance Manual, "System Pressure Release".
Drain the hydraulic tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Hydraulic Tank Oil - Change - Hoist and Brake System".
Illustration 1 g01988102
Remove tube assemblies (1). Disconnect hose assembly (2).
Illustration 2 g01988113
Disconnect hose assembly (3) and hose assembly (4).
Illustration 3 g01988116
Illustration 4 g01988154
Attach a suitable lifting device onto gear pump (5). The weight of gear pump (5) is approximately 147 kg (325 lb).
Remove nuts (6). Remove gear pump (5).
Illustration 5 g01988156
Remove O-ring seal (7). Installation Procedure
Install gear pump (5) in the reverse order.
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Install the truck body retaining cables. Operation and Maintenance Manual, "Cable (Truck Body Retaining)".
Release the system pressure. Refer to Operation and Maintenance Manual, "System Pressure Release".
Drain the hydraulic tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Hydraulic Tank Oil - Change - Hoist and Brake System".
Illustration 1 g01988102
Remove tube assemblies (1). Disconnect hose assembly (2).
Illustration 2 g01988113
Disconnect hose assembly (3) and hose assembly (4).
Illustration 3 g01988116
Illustration 4 g01988154
Attach a suitable lifting device onto gear pump (5). The weight of gear pump (5) is approximately 147 kg (325 lb).
Remove nuts (6). Remove gear pump (5).
Illustration 5 g01988156
Remove O-ring seal (7). Installation Procedure
Install gear pump (5) in the reverse order.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts manifold Caterpillar catalog:
24M, 3406B, 3406C, 3406E, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637D, 63...
24M, 365C, 365C L, 365C L MH, 374D L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 824C, 824H, 825H, 826H, 834H, 836H, 980G, 980H, 986H, 988H, AD45B, AD55, C15, C18, PM-200, PM-201
3E3584
MANIFOLD
14H, 16H, 5110B, 5130, 5230, 824C, 824G II, 824H, 825G II, 825H, 826G II, 826H, 834H, 836H, 844H, 854G, 854K, 938G II, 950G II, 962G II, 966F II, 966G II, 972G II, 980C, 980G, 980G II, 980H, 988H, 990...
14H, 16H, 5110B, 5130, 5230, 824C, 824G II, 824H, 825G II, 825H, 826G II, 826H, 834H, 836H, 844H, 854G, 854K, 938G II, 950G II, 962G II, 966F II, 966G II, 972G II, 980C, 980G, 980G II, 980H, 988H, 990...
904B, 904H, 966G, 966G II, 966H, 972G, 972G II, 972H, 980G, 980G II, 980H, 986H
1145386
MANIFOLD AS-PUMP
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 980G, 980G II, 980H
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 980G, 980G II, 980H
1144835
MANIFOLD
980G, 980G II, 980H
980G, 980G II, 980H
1647441
MANIFOLD-HYDRAULIC
980G, 980G II, 980H
980G, 980G II, 980H
1162155
MANIFOLD
980G, 980G II, 980H
980G, 980G II, 980H
2951146
MANIFOLD
24M, 824H, 825H, 826H, 834H, 836H, 980H, 988H
24M, 824H, 825H, 826H, 834H, 836H, 980H, 988H
2314782
MANIFOLD
824H, 825H, 826H, 980H
824H, 825H, 826H, 980H
3808545
MANIFOLD-EXHAUST
24M, 735B, 740B, 824C, 824H, 824K, 825H, 825K, 826H, 826K, 834K, 980G, 980H, 986H, 988K, PM-201, RM-500
24M, 735B, 740B, 824C, 824H, 824K, 825H, 825K, 826H, 826K, 834K, 980G, 980H, 986H, 988K, PM-201, RM-500
2368938
MANIFOLD-VALVE
980H, 980K, 980K HLG, 980M, 982M
980H, 980K, 980K HLG, 980M, 982M
3814788
MANIFOLD GP-EXHAUST
G3516B
G3516B
3814787
MANIFOLD GP-EXHAUST
G3516B
G3516B
3814786
MANIFOLD GP-EXHAUST
G3516B
G3516B
3814785
MANIFOLD GP-EXHAUST
G3516B
G3516B
3814747
MANIFOLD GP-EXHAUST
XQC1600
XQC1600
3814746
MANIFOLD GP-EXHAUST
XQC1600
XQC1600
4441258
MANIFOLD GP-EXHAUST
XQC1200
XQC1200
4441257
MANIFOLD GP-EXHAUST
XQC1200
XQC1200
4167808
MANIFOLD GP-EXHAUST
950 GC, C7.1, D6K2
950 GC, C7.1, D6K2