4343243 MANIFOLD AS Caterpillar parts
12M 3, 12M 3 AWD, 140M 3, 140M 3 AWD, 160M 3, 160M 3 AWD, 336F L, 349F L, 621K, 623K, 627K, C13, C15, C18, C9.3, D9T
Rating:
Alternative (cross code) number:
CA4343243
434-3243
4343243
CA4343243
434-3243
4343243
Weight: 2 pounds 1 kg.
EXCAVATOR, WHEEL TRACTOR-SCRAPER,
This part in 2 request:
Show.
This information for suppliers only!
2024-07-02
2024-05-31
Compatible equipment models: 4343243:
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Note: Put identification marks on all lines and on all hoses for installation purposes. Plug all lines and all hoses. This will help to prevent fluid loss and this will help to keep contaminants from entering the system.
Lower the blade to the ground.
Illustration 1 g00403006
Remove bolts (3), retainer (1) and pin (2) from both links.
Start the engine. Retract the lift cylinder rods.
Stop the engine.
Illustration 2 g00405700
Attach a hoist and a suitable lifting sling to stabilizer link (4). The weight of the stabilizer link is 330 kg (730 lb).
Remove bolts (6), cap (5) and the shims.
Start the engine. Carefully turn the front frame to the left until stabilizer link (4) is disengaged from the front frame.
Stop the engine.
Illustration 3 g00405701
Use a hoist to lower the disconnected end of stabilizer link (4) to the ground. The weight of the stabilizer link is 330 kg (730 lb).
Release the pressure from the implement hydraulic system. Refer to Disassembly and Assembly, "System Pressure - Release".Note: Collect any fluids in a suitable container.
Illustration 4 g00405703
Disconnect four hose assemblies (7) .
Illustration 5 g00405704
Place suitable stands or cribbing under push arm (8), as shown.
Illustration 6 g00405705
Attach a hoist and a suitable lifting sling to bearing cap (9) .
Remove bolts (10), bearing cap (9) and the shims from push arm (8). The weight of the bearing cap is 72 kg (160 lb).
Repeat Steps 12 through 14 for the push arm on the other side of the machine.
Illustration 7 g00405707
Illustration 8 g00405709
Slowly back up the machine away from the blade so that push arms (8) are disengaged from trunnion (11) .
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Note: Put identification marks on all lines and on all hoses for installation purposes. Plug all lines and all hoses. This will help to prevent fluid loss and this will help to keep contaminants from entering the system.
Lower the blade to the ground.
Illustration 1 g00403006
Remove bolts (3), retainer (1) and pin (2) from both links.
Start the engine. Retract the lift cylinder rods.
Stop the engine.
Illustration 2 g00405700
Attach a hoist and a suitable lifting sling to stabilizer link (4). The weight of the stabilizer link is 330 kg (730 lb).
Remove bolts (6), cap (5) and the shims.
Start the engine. Carefully turn the front frame to the left until stabilizer link (4) is disengaged from the front frame.
Stop the engine.
Illustration 3 g00405701
Use a hoist to lower the disconnected end of stabilizer link (4) to the ground. The weight of the stabilizer link is 330 kg (730 lb).
Release the pressure from the implement hydraulic system. Refer to Disassembly and Assembly, "System Pressure - Release".Note: Collect any fluids in a suitable container.
Illustration 4 g00405703
Disconnect four hose assemblies (7) .
Illustration 5 g00405704
Place suitable stands or cribbing under push arm (8), as shown.
Illustration 6 g00405705
Attach a hoist and a suitable lifting sling to bearing cap (9) .
Remove bolts (10), bearing cap (9) and the shims from push arm (8). The weight of the bearing cap is 72 kg (160 lb).
Repeat Steps 12 through 14 for the push arm on the other side of the machine.
Illustration 7 g00405707
Illustration 8 g00405709
Slowly back up the machine away from the blade so that push arms (8) are disengaged from trunnion (11) .
Cat SIS web machinery list:
Parts manifold Caterpillar catalog:
1613398
MANIFOLD-EXHAUST
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2864C, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, ...
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2864C, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, ...
1333359
MANIFOLD-EXHAUST
24M, 3406B, 3406C, 3406E, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637D, 63...
24M, 3406B, 3406C, 3406E, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637D, 63...
2319030
MANIFOLD-EXHAUST
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725, 730, 730C, 966H, 972H,...
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725, 730, 730C, 966H, 972H,...
2123664
MANIFOLD-EXHAUST
3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, AP-1055D, AP-755, BG-...
3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, AP-1055D, AP-755, BG-...
2195855
MANIFOLD-EXHAUST
3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, AP-1055D, AP-755, BG-...
3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, AP-1055D, AP-755, BG-...
4224925
MANIFOLD AS
D10T2, D9T
D10T2, D9T
4497688
MANIFOLD
D9T
D9T
2502138
MANIFOLD
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M
2340821
MANIFOLD AS-OIL PUMP
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD
3825517
MANIFOLD-INLET
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD
3825518
MANIFOLD-INLET
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD
3499671
MANIFOLD-EXHAUST
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD
3901145
MANIFOLD AS
374F L, 390F L, C13, C15, C18, C7.1, C9.3
374F L, 390F L, C13, C15, C18, C7.1, C9.3
3766467
MANIFOLD AS
980M, C13, C15, C18, C9.3
980M, C13, C15, C18, C9.3
3766468
MANIFOLD AS
C13, C15, C18, C9.3
C13, C15, C18, C9.3
4343242
MANIFOLD AS
980M, 982M, C13, C15, C18, C7.1, C9.3
980M, 982M, C13, C15, C18, C7.1, C9.3
3989448
MANIFOLD
336F L, 349F L, 374F L, 390F L, 621K, 623K, 627K, 770G, 770G OEM, 772G, 772G OEM, 966M, 966M XE, 972M, 972M XE, 980M, 982M, C13, C15, C18, C7.1, C9.3, D6T LGP, D6T LGPPAT, D9T
336F L, 349F L, 374F L, 390F L, 621K, 623K, 627K, 770G, 770G OEM, 772G, 772G OEM, 966M, 966M XE, 972M, 972M XE, 980M, 982M, C13, C15, C18, C7.1, C9.3, D6T LGP, D6T LGPPAT, D9T
3735611
MANIFOLD
980M, C13, C15, C18, C9.3
980M, C13, C15, C18, C9.3
3983754
MANIFOLD AS
12M 3, 12M 3 AWD, 140M 3, 140M 3 AWD, 160M 3, 160M 3 AWD, 336E, 336E LN, 336F L, 627K, 772G, 772G OEM, 824K, 825K, 826K, 834K, 836K, 966M, 966M XE, 972M, 972M XE, 980M, 982M, 988K, C13, C15, C18, C9.3
12M 3, 12M 3 AWD, 140M 3, 140M 3 AWD, 160M 3, 160M 3 AWD, 336E, 336E LN, 336F L, 627K, 772G, 772G OEM, 824K, 825K, 826K, 834K, 836K, 966M, 966M XE, 972M, 972M XE, 980M, 982M, 988K, C13, C15, C18, C9.3
4288785
MANIFOLD
C13, C15, C18, D8T, D9T
C13, C15, C18, D8T, D9T
4288784
MANIFOLD
12M 3, 12M 3 AWD, 140M 3, 140M 3 AWD, 160M 3, 160M 3 AWD, 336F L, 349F L, 374F L, 390F L, 621K, 623K, 627K, 725C, 730C, 770G, 770G OEM, 824K, 825K, 826K, 834K, 836K, 966M, 966M XE, 972M, 972M XE, 980M...
12M 3, 12M 3 AWD, 140M 3, 140M 3 AWD, 160M 3, 160M 3 AWD, 336F L, 349F L, 374F L, 390F L, 621K, 623K, 627K, 725C, 730C, 770G, 770G OEM, 824K, 825K, 826K, 834K, 836K, 966M, 966M XE, 972M, 972M XE, 980M...
4343241
MANIFOLD AS
525D, 535D, 545D, 555D, 725C, 730C, 824K, 825K, 826K, 834K, 836K, 966M, 966M XE, 972M, 972M XE, 988K, C13, C15, C18, C9.3, D6T LGP, D6T LGPPAT
525D, 535D, 545D, 555D, 725C, 730C, 824K, 825K, 826K, 834K, 836K, 966M, 966M XE, 972M, 972M XE, 988K, C13, C15, C18, C9.3, D6T LGP, D6T LGPPAT
3901143
MANIFOLD AS
834K, 988K, C13, C15, C18, C7.1, C9.3
834K, 988K, C13, C15, C18, C7.1, C9.3