MANIFOLD GP 4658573 - Caterpillar

Security Management
The MSS has the capability to allow you to program the system to automatically activate at different time periods with different keys. The MSS can also be programmed to reject a specific electronic key after a selected date and time. When you turn the key to the OFF position and the MSS is active, you have a 30 second interval in order to restart the machine with an unauthorized key. Also if the machine stalls, there is a 30 second interval for restarting the machine. This 30 second interval is counted from the time of turning the key to the OFF position.Note: Know your machines settings because the use of an electronic key is no guarantee that the machine can be restarted.An expiration date can be set for each electronic key that is contained in the list of keys for the machine. The key will no longer start the machine when the internal clock in the security system passes the expiration date. Each entry in the list of keys can have a different expiration date.Spare keys are available from your dealer. Before a key can operate the machine, the MSS must be set to accept that particular key. Contact your Caterpillar dealer for information on additional features of the MSS.Operating The Machine
Adjust the operators seat.
Fasten the seat belt.
Start the engine.
Allow the engine to warm up for 3 to 5 minutes.
Before you move the machine, ensure that no one will be endangered.
Operate the machine in an open area. Check for proper operation of all controls and protective devices.
Illustration 1 g01608996
Push down on service brake pedal (2) in order to prevent the machine from moving.
Raise all attachments enough to clear any unexpected obstacles.
Illustration 2 g01476100
Steering and transmission control lever
Release the parking brake by pushing down on parking brake knob (3) . This unlocks the parking brake, the transmission control, and the steering lever.Note: When the parking brake is set, the transmission defaults to neutral. When the parking brake is released the transmission will stay in neutral. In order to select a transmission speed range, return the direction selector (4) to neutral.
Then, move direction selector (4) to the desired direction. Use speed range selector (5) to select the desired speed range.
Release service brake pedal (2) in order to allow the machine to move.
Check the service brakes.
Illustration 3 g01195887
The throttle control switch is located toward the front of the right-hand console.
To select high idle, press the throttle control switch on the top of the switch and release.Note: The machine is capable of driving through the service brakes in the first speed range when the engine is set at high idle.
To select low idle, press the throttle control switch on the bottom of the switch and release.
Select an intermediate engine speed in the following manner:
Select the desired engine speed with decelerator (1) .
Push in on the switch of the throttle control and hold for three seconds in order to lock in the engine speed.
Change an intermediate engine speed in the following manner:
To return to high