4P3897 MANIFOLD Caterpillar parts
3512, 3512B, 3512C, 3516, 3516B, 3516C, 5230, 5230B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 994, 994D, 994F, 994H, G3512, G3512B, G3512E, G3516, G3516B,...
Rating:
Alternative (cross code) number:
CA4P3897
4P-3897
4P3897
CA4P3897
4P-3897
4P3897
Weight: 21 pounds 9 kg.
GAS ENGINE, WHEEL LOADER,
Compatible equipment models: 4P3897:
REMAN ENGINE
3516B
Information:
Inspection
Inspect the alternator belt and the fan drive belts for wear and for cracking. Replace the belts if the belts are not in good condition.Check the belt tension according to the information in the Service Manual, "Specifications".Slippage of loose belts can reduce the efficiency of the driven components. Vibration of loose belts can cause unnecessary wear on the following components:
Belts
Pulleys
BearingsIf the belts are too tight, unnecessary stress is placed on the components. This reduces the service life of the components.Adjusting the Alternator Belt
Illustration 1 g01092641
(1) Mounting bolt
(2) Adjusting nuts
(3) Mounting bolt
Remove the drive belt guard.
Loosen mounting bolt (1), adjusting nuts (2) and mounting bolt (3).
Turn adjusting nuts (2) in order to increase or decrease the drive belt tension.
Tighten adjusting nuts (2). Tighten mounting bolt (3). Tighten mounting bolt (1). For the proper torque, see the Service Manual, "Specifications" module.
Reinstall the drive belt guard. If new drive belts are installed, check the drive belt tension again after 30 minutes of engine operation at the rated rpm.Adjusting the Fan Drive Belt
Loosen the mounting bolt for the pulley.
Loosen the adjusting nut for the pulley.
Move the pulley in order to adjust the belt tension.
Tighten the adjusting nut.
Tighten the mounting bolt. Replacement
For applications that require multiple drive belts, replace the drive belts in matched sets. Replacing one drive belt of a matched set will cause the new drive belt to carry more load because the older drive belts are stretched. The additional load on the new drive belt could cause the new drive belt to fail.
Inspect the alternator belt and the fan drive belts for wear and for cracking. Replace the belts if the belts are not in good condition.Check the belt tension according to the information in the Service Manual, "Specifications".Slippage of loose belts can reduce the efficiency of the driven components. Vibration of loose belts can cause unnecessary wear on the following components:
Belts
Pulleys
BearingsIf the belts are too tight, unnecessary stress is placed on the components. This reduces the service life of the components.Adjusting the Alternator Belt
Illustration 1 g01092641
(1) Mounting bolt
(2) Adjusting nuts
(3) Mounting bolt
Remove the drive belt guard.
Loosen mounting bolt (1), adjusting nuts (2) and mounting bolt (3).
Turn adjusting nuts (2) in order to increase or decrease the drive belt tension.
Tighten adjusting nuts (2). Tighten mounting bolt (3). Tighten mounting bolt (1). For the proper torque, see the Service Manual, "Specifications" module.
Reinstall the drive belt guard. If new drive belts are installed, check the drive belt tension again after 30 minutes of engine operation at the rated rpm.Adjusting the Fan Drive Belt
Loosen the mounting bolt for the pulley.
Loosen the adjusting nut for the pulley.
Move the pulley in order to adjust the belt tension.
Tighten the adjusting nut.
Tighten the mounting bolt. Replacement
For applications that require multiple drive belts, replace the drive belts in matched sets. Replacing one drive belt of a matched set will cause the new drive belt to carry more load because the older drive belts are stretched. The additional load on the new drive belt could cause the new drive belt to fail.
Cat SIS web machinery list:
Parts manifold Caterpillar catalog:
1138172
MANIFOLD-EXHAUST
3508B, 5130, 5130B, 5230, 776C, 776D, 777, 777B, 777C, 777D, 784B, 785, 785B, 789, 789B, 854G, 992G, 994, D11N, D11R
3508B, 5130, 5130B, 5230, 776C, 776D, 777, 777B, 777C, 777D, 784B, 785, 785B, 789, 789B, 854G, 992G, 994, D11N, D11R
1438326
MANIFOLD
5130B, 5230
5130B, 5230
1639394
MANIFOLD
5110B, 5230
5110B, 5230
1639393
MANIFOLD
5110B, 5130B, 5230, 5230B
5110B, 5130B, 5230, 5230B
2015214
MANIFOLD
5130B, 5230, 5230B
5130B, 5230, 5230B
1946160
MANIFOLD
5110B, 5130B, 5230B
5110B, 5130B, 5230B
2243886
MANIFOLD
5110B, 5130B, 5230B
5110B, 5130B, 5230B
1226073
MANIFOLD
5230B
5230B
1862422
MANIFOLD
5230B
5230B
1693670
MANIFOLD
5230B
5230B
4P3898
MANIFOLD-FRONT-RH
3508, 3512, 3516, G3508
3508, 3512, 3516, G3508
1003068
MANIFOLD
3408B, 3412
3408B, 3412
1003067
MANIFOLD
3408B, 3412
3408B, 3412
6N0448
MANIFOLD
24H, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 69D, 769C, 769D, 771C, 771D, 773B, 775B, 834B, 836, 988B, 988F, 988F II, AD40, AD45, AE40, AE40 II, C27, C30, C32, CX35-P800, D44B, D550B, PM-565, P...
24H, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 69D, 769C, 769D, 771C, 771D, 773B, 775B, 834B, 836, 988B, 988F, 988F II, AD40, AD45, AE40, AE40 II, C27, C30, C32, CX35-P800, D44B, D550B, PM-565, P...
1003147
MANIFOLD-EXHAUST
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3508, G3512, G3516, G3516B, SPF343, SPS343, SPT343, XQC1600
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3508, G3512, G3516, G3516B, SPF343, SPS343, SPT343, XQC1600
1003145
MANIFOLD-EXHAUST
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3508, G3512, G3516, G3516B, SPF343, SPS343, SPT343, XQC1600
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3508, G3512, G3516, G3516B, SPF343, SPS343, SPT343, XQC1600
7E8706
MANIFOLD-INLET
3516, 793, 793B, 793C
3516, 793, 793B, 793C
7C4409
MANIFOLD-REAR
3516
3516
7C4408
MANIFOLD-REAR
3516
3516
4P3895
MANIFOLD-FRONT-LH
3508, 3512, 3516, G3508
3508, 3512, 3516, G3508