MANIFOLD & VALVE GP 5048900 - Caterpillar

Removal Procedure
Start By:
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Disconnect air inlet piping from the turbocharger to the aftercooler, if necessary.
Illustration 1 g00629952
Remove bolts (1) and disconnect air inlet heater solenoid (3).
Remove air inlet elbows (2) from air inlet manifold (5).
Remove bolts (4) from air inlet manifold (5).
Remove air inlet manifold (5) and the gasket.