MANIFOLD 5477410 - Caterpillar

Removal Procedure
Table 1
Required Tooling
Tool Part Number Part Description Qty
A - Loctite MR2000 - Start By:
Remove hood.
Illustration 1 g06218328
Attach a suitable lifting device to muffler assembly (1). The weight of muffler assembly (1) is approximately 39 kg (86 lb).
Illustration 2 g06218402
Remove bolts (3) and clamp (4). Discard clamp (4).
Remove bolts (2).
Remove muffler assembly (1).
Illustration 3 g06218407
Remove clamp (6) and pipe (5).
Remove nuts (8), U- bolts (7), and bracket assembly (9).Installation Procedure
Illustration 4 g06218407
Install bracket assembly (9), U-bolts (7), and nuts (8). Tighten nuts (8) to a torque of 15 3 N m (133 27 lb in).
Install pipe (5) and clamp (6). Tighten clamp (6) to a torque of 47 4 N m (35 3 lb ft). Make sure that clamp (6) is aligned to the edge of pipe (5).
Illustration 5 g06218328
Attach a suitable lifting device to muffler assembly (1). The weight of muffler assembly (1) is approximately 39 kg (86 lb). Install muffler assembly (1).
Illustration 6 g06218402
Install bolts (2).
Apply a thin coat of Tooling (A) to the OD of male pipe end. Install clamp (4) so that the larger end is over the females pipe. Locate the step of clamp (4) to the step of the overlapping pipe. Install bolts (3). Tighten bolts (3) to a torque of 68 12 N m (50 9 lb ft).End By:
Install hood.