AVSPARE.COM
parts catalog

MANIFOLD 5487669 - Caterpillar


5487669 MANIFOLD Caterpillar parts
Rating:
51
Alternative (cross code) number:
CA5487669
548-7669
5487669
Caterpillar 5487669 MANIFOLD

Buy MANIFOLD 5487669 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 2
  For full view, you need register

Information:

Note: This is an optional procedure to install the camshaft. The preceding tool list shows the required tooling for installing the camshaft from the front of the engine or the rear of the engine.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Care must be used when removing or installing the camshaft. Do not damage the finished surfaces of the camshaft or the camshaft bearings.
Ensure that the camshaft and camshaft bearings are thoroughly clean. Lubricate the camshaft lobes with a 50/50 mixture of Tooling (J) and clean engine oil. Apply a thin coat of clean engine oil on the camshaft bearings.
To install the camshaft from the rear of the engine, go to Step 3 through Step 6. To install the camshaft from the front of the engine, go to Step 7 through Step 10.
Illustration 8 g01056714
Install the camshaft from the rear of the engine.
To install the camshaft from the rear of the engine, install Tooling (F) on the front of camshaft (8) with Tooling (G).Note: Carefully align Tooling (F) with the end of camshaft (8). If the adapter and the camshaft are not aligned, the camshaft may not be removed. The adapter and camshaft bearing will interfere.
Install Tooling (E) on Tooling (F).
Use two people to install the camshaft. Carefully slide the camshaft into the cylinder head from the rear of the engine. Keep the camshaft level while the camshaft is being installed in the cylinder head. The weight of camshaft (8) is approximately 39 kg (86 lb).Note: Rotate the camshaft during installation. This will prevent the camshaft from binding in the camshaft bearings.
Remove Tooling (E), Tooling (F), and Tooling (G) from the camshaft.
Illustration 9 g01056717
Install the camshaft from the front of the engine.
To install the camshaft from the front of the engine, install Tooling (F) on the rear of camshaft (8) with Tooling (G).Note: Carefully align Tooling (F) with the end of camshaft (8). If the adapter and the camshaft are not aligned, the camshaft may not be removed. The adapter and camshaft bearing will interfere.
Install Tooling (E) on Tooling (F).
Use two people to install the camshaft. Carefully slide the camshaft into the cylinder head from the front of the engine. Keep the camshaft level while the camshaft is being installed in the cylinder head. The weight of camshaft (8) is approximately 39 kg (86 lb).Note: Rotate the camshaft during installation. This will prevent the camshaft from binding in the camshaft bearings.
Remove Tooling (E), Tooling (F), and Tooling (G) from the camshaft.
Illustration 10 g01056675
Install the O-ring seal on cover (10). Position the cover on the rear of the cylinder head. Install flat head screws (9) and tighten to a torque of 6 1 N m (53 9 lb in).
Illustration 11 g01056684
Install O-ring seal (5) and O-ring seal

Caterpillar parts catalog:

Caterpillar parts catalog
MD6200 Rotary Drill RKP00001-UP (MACHINE) POWERED BY C18 Engine
MD6200 Rotary Drill D9A00001-UP (MACHINE) POWERED BY C18 Engine
MD6250 Rotary Blasthole Drill DN700001-UP (MACHINE) POWERED BY C27 Engine
MD6250 Rotary Blasthole Drill DN800001-UP (MACHINE) POWERED BY C27 Engine
MD6310 Rotary Blasthole Drill DLK00001-UP (MACHINE) POWERED BY C32 Engine
MD6310 Rotary Blasthole Drill DLZ00001-UP (MACHINE) POWERED BY C32 Engine


Parts manifold Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.